X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=tests%2Fperf%2FLong_Xconnect_Dot1ad_Intel-X520-DA2.robot;h=ecf88fff7a6d215948c0d76e4c0b15fa61ca708c;hb=3bfb4d5eb4a0d15bc964bf11cec870ee982ae3b4;hp=09d93983fedcc6cbe2f7a78cbcbabd2703ce8772;hpb=70cbaaee0e6210682ce6d278ea645b8bea153b67;p=csit.git

diff --git a/tests/perf/Long_Xconnect_Dot1ad_Intel-X520-DA2.robot b/tests/perf/Long_Xconnect_Dot1ad_Intel-X520-DA2.robot
index 09d93983fe..ecf88fff7a 100644
--- a/tests/perf/Long_Xconnect_Dot1ad_Intel-X520-DA2.robot
+++ b/tests/perf/Long_Xconnect_Dot1ad_Intel-X520-DA2.robot
@@ -20,8 +20,13 @@
 | ... | L2 | Intel-X520-DA2
 | Suite Teardown | 3-node Performance Suite Teardown
 | Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords | Remove startup configuration of VPP from all DUTs
-| ...           | AND          | Show vpp trace dump on all DUTs
+| Test Teardown | Run Keywords
+| ...           | Run Keyword If Test Failed
+| ...           | Traffic should pass with no loss | 10
+| ...           | ${min_rate}pps | ${framesize} | 3-node-xconnect
+| ...           | fail_on_loss=${False}
+| ...           | AND | Remove startup configuration of VPP from all DUTs
+| ...           | AND | Show vpp trace dump on all DUTs
 | Documentation | *RFC2544: Pkt throughput L2XC with 802.1ad test cases*
 | ...
 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
@@ -41,7 +46,7 @@
 | ... | links to DUTs. TG traffic profile contains two L3 flow-groups
 | ... | (flow-group per direction, 253 flows per flow-group) with all packets
 | ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | generated payload. MAC addresses are matching MAC addresses of the TG
+| ... | static payload. MAC addresses are matching MAC addresses of the TG
 | ... | node interfaces.
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
@@ -58,7 +63,7 @@
 | | ... | [Cfg] DUT runs L2XC forwarding config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_72B}
@@ -66,7 +71,7 @@
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
-| | And   Add all PCI devices to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology
@@ -89,7 +94,7 @@
 | | ... | [Cfg] DUT runs L2XC forwarding config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_72B}
@@ -97,7 +102,7 @@
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
-| | And   Add all PCI devices to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology
@@ -122,7 +127,7 @@
 | | ... | [Cfg] DUT runs L2XC forwarding config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1514 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
 | | ${framesize}= | Set Variable | 1514
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1522B}
@@ -130,7 +135,7 @@
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
-| | And   Add all PCI devices to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology
@@ -153,7 +158,7 @@
 | | ... | [Cfg] DUT runs L2XC forwarding config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1514 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH
 | | ${framesize}= | Set Variable | 1514
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1522B}
@@ -161,7 +166,7 @@
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
-| | And   Add all PCI devices to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology
@@ -186,7 +191,7 @@
 | | ... | [Cfg] DUT runs L2XC forwarding config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9008B}
@@ -194,7 +199,7 @@
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
-| | And   Add all PCI devices to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology
 | | When VLAN subinterfaces initialized on 3-node topology
@@ -216,7 +221,7 @@
 | | ... | [Cfg] DUT runs L2XC forwarding config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9008B}
@@ -224,7 +229,7 @@
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
-| | And   Add all PCI devices to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology
 | | When VLAN subinterfaces initialized on 3-node topology
@@ -248,7 +253,7 @@
 | | ... | [Cfg] DUT runs L2XC forwarding config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_72B}
@@ -256,7 +261,7 @@
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
-| | And   Add all PCI devices to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology
@@ -279,7 +284,7 @@
 | | ... | [Cfg] DUT runs L2XC forwarding config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | SKIP_PATCH
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_72B}
@@ -287,7 +292,7 @@
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
-| | And   Add all PCI devices to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology
@@ -320,7 +325,7 @@
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
-| | And   Add all PCI devices to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology
@@ -351,7 +356,7 @@
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
-| | And   Add all PCI devices to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology
@@ -384,7 +389,7 @@
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
-| | And   Add all PCI devices to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology
 | | When VLAN subinterfaces initialized on 3-node topology
@@ -414,7 +419,7 @@
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
-| | And   Add all PCI devices to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology
 | | When VLAN subinterfaces initialized on 3-node topology
@@ -438,7 +443,7 @@
 | | ... | [Cfg] DUT runs L2XC forwarding config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_72B}
@@ -446,7 +451,7 @@
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
-| | And   Add all PCI devices to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology
@@ -469,7 +474,7 @@
 | | ... | [Cfg] DUT runs L2XC forwarding config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | SKIP_PATCH
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_72B}
@@ -477,7 +482,7 @@
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
-| | And   Add all PCI devices to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology
@@ -510,7 +515,7 @@
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
-| | And   Add all PCI devices to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology
@@ -541,7 +546,7 @@
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
-| | And   Add all PCI devices to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology
@@ -574,7 +579,7 @@
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
-| | And   Add all PCI devices to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology
 | | When VLAN subinterfaces initialized on 3-node topology
@@ -604,7 +609,7 @@
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
-| | And   Add all PCI devices to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology
 | | When VLAN subinterfaces initialized on 3-node topology