X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=tests%2Fperf%2FLong_Xconnect_Dot1ad_Intel-X520-DA2.robot;h=f289c32ae4ca47faaacecabc1a01c56ae7db0fdb;hb=4bda4f8b55b0d431b514663e8e90fccd97ad31d4;hp=a37ebbbae9bd0716ed39eb58c749ad932e7cdf4d;hpb=345cd09bbbe57514f59d686a0338b672a786eba3;p=csit.git

diff --git a/tests/perf/Long_Xconnect_Dot1ad_Intel-X520-DA2.robot b/tests/perf/Long_Xconnect_Dot1ad_Intel-X520-DA2.robot
index a37ebbbae9..f289c32ae4 100644
--- a/tests/perf/Long_Xconnect_Dot1ad_Intel-X520-DA2.robot
+++ b/tests/perf/Long_Xconnect_Dot1ad_Intel-X520-DA2.robot
@@ -20,8 +20,13 @@
 | ... | L2 | Intel-X520-DA2
 | Suite Teardown | 3-node Performance Suite Teardown
 | Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords | Remove startup configuration of VPP from all DUTs
-| ...           | AND          | Show vpp trace dump on all DUTs
+| Test Teardown | Run Keywords
+| ...           | Run Keyword If Test Failed
+| ...           | Traffic should pass with no loss | 10
+| ...           | ${min_rate}pps | ${framesize} | 3-node-xconnect
+| ...           | fail_on_loss=${False}
+| ...           | AND | Remove startup configuration of VPP from all DUTs
+| ...           | AND | Show vpp trace dump on all DUTs
 | Documentation | *RFC2544: Pkt throughput L2XC with 802.1ad test cases*
 | ...
 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
@@ -41,7 +46,7 @@
 | ... | links to DUTs. TG traffic profile contains two L3 flow-groups
 | ... | (flow-group per direction, 253 flows per flow-group) with all packets
 | ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | generated payload. MAC addresses are matching MAC addresses of the TG
+| ... | static payload. MAC addresses are matching MAC addresses of the TG
 | ... | node interfaces.
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
@@ -51,6 +56,8 @@
 | ${inner_vlan_id}= | 200
 | ${type_subif}= | two_tags
 | ${tag_rewrite}= | pop-2
+#X520-DA2 bandwidth limit
+| ${s_limit} | ${10000000000}
 
 *** Test Cases ***
 | TC01: 64B NDR binary search - DUT L2XC with 802.1ad - 1thread 1core 1rxq
@@ -59,13 +66,13 @@
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
-| | ${framesize}= | Set Variable | 64
-| | ${min_rate}= | Set Variable | 100000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_72B}
+| | ${framesize}= | Set Variable | ${64}
+| | ${min_rate}= | Set Variable | ${100000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 8}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
@@ -90,13 +97,13 @@
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH
-| | ${framesize}= | Set Variable | 64
-| | ${min_rate}= | Set Variable | 100000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_72B}
+| | ${framesize}= | Set Variable | ${64}
+| | ${min_rate}= | Set Variable | ${100000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 8}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
@@ -123,13 +130,13 @@
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1514 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps.
 | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
-| | ${framesize}= | Set Variable | 1514
-| | ${min_rate}= | Set Variable | 10000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1522B}
+| | ${framesize}= | Set Variable | ${1514}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 8}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
@@ -154,13 +161,13 @@
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1514 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
 | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH
-| | ${framesize}= | Set Variable | 1514
-| | ${min_rate}= | Set Variable | 10000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1522B}
+| | ${framesize}= | Set Variable | ${1514}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 8}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
@@ -187,13 +194,13 @@
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps.
 | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
-| | ${framesize}= | Set Variable | 9000
-| | ${min_rate}= | Set Variable | 5000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9008B}
+| | ${framesize}= | Set Variable | ${9000}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 8}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology
@@ -217,13 +224,13 @@
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.
 | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH
-| | ${framesize}= | Set Variable | 9000
-| | ${min_rate}= | Set Variable | 5000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9008B}
+| | ${framesize}= | Set Variable | ${9000}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 8}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology
@@ -249,13 +256,13 @@
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
-| | ${framesize}= | Set Variable | 64
-| | ${min_rate}= | Set Variable | 100000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_72B}
+| | ${framesize}= | Set Variable | ${64}
+| | ${min_rate}= | Set Variable | ${100000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 8}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
@@ -280,13 +287,13 @@
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | SKIP_PATCH
-| | ${framesize}= | Set Variable | 64
-| | ${min_rate}= | Set Variable | 100000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_72B}
+| | ${framesize}= | Set Variable | ${64}
+| | ${min_rate}= | Set Variable | ${100000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 8}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
@@ -313,13 +320,13 @@
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1514 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps.
 | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | SKIP_PATCH
-| | ${framesize}= | Set Variable | 1514
-| | ${min_rate}= | Set Variable | 10000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1522B}
+| | ${framesize}= | Set Variable | ${1514}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 8}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
@@ -344,13 +351,13 @@
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1514 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
 | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | SKIP_PATCH
-| | ${framesize}= | Set Variable | 1514
-| | ${min_rate}= | Set Variable | 10000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1522B}
+| | ${framesize}= | Set Variable | ${1514}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 8}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
@@ -377,13 +384,13 @@
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps.
 | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | SKIP_PATCH
-| | ${framesize}= | Set Variable | 9000
-| | ${min_rate}= | Set Variable | 5000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9008B}
+| | ${framesize}= | Set Variable | ${9000}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 8}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology
@@ -407,13 +414,13 @@
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.
 | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | SKIP_PATCH
-| | ${framesize}= | Set Variable | 9000
-| | ${min_rate}= | Set Variable | 5000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9008B}
+| | ${framesize}= | Set Variable | ${9000}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 8}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology
@@ -439,13 +446,13 @@
 | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
-| | ${framesize}= | Set Variable | 64
-| | ${min_rate}= | Set Variable | 100000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_72B}
+| | ${framesize}= | Set Variable | ${64}
+| | ${min_rate}= | Set Variable | ${100000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 8}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
@@ -470,13 +477,13 @@
 | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | SKIP_PATCH
-| | ${framesize}= | Set Variable | 64
-| | ${min_rate}= | Set Variable | 100000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_72B}
+| | ${framesize}= | Set Variable | ${64}
+| | ${min_rate}= | Set Variable | ${100000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 8}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
@@ -503,13 +510,13 @@
 | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 1514 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps.
 | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | SKIP_PATCH
-| | ${framesize}= | Set Variable | 1514
-| | ${min_rate}= | Set Variable | 10000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1522B}
+| | ${framesize}= | Set Variable | ${1514}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 8}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
@@ -534,13 +541,13 @@
 | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 1514 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
 | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | SKIP_PATCH
-| | ${framesize}= | Set Variable | 1514
-| | ${min_rate}= | Set Variable | 10000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1522B}
+| | ${framesize}= | Set Variable | ${1514}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 8}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
@@ -567,13 +574,13 @@
 | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps.
 | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | SKIP_PATCH
-| | ${framesize}= | Set Variable | 9000
-| | ${min_rate}= | Set Variable | 5000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9008B}
+| | ${framesize}= | Set Variable | ${9000}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 8}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology
@@ -597,13 +604,13 @@
 | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.
 | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | SKIP_PATCH
-| | ${framesize}= | Set Variable | 9000
-| | ${min_rate}= | Set Variable | 5000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9008B}
+| | ${framesize}= | Set Variable | ${9000}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize + 8}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | And   VPP interfaces in path are up in a 3-node circular topology