X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=tests%2Fperf%2FShort_IPv4_Policer_Intel-X520-DA2.robot;fp=tests%2Fperf%2FShort_IPv4_Policer_Intel-X520-DA2.robot;h=e6967dc1da55e14b3c493ed0ac8d5ea81e629958;hb=cff5ea63c1a32c3e396e4aa47d54cb9e56748d7d;hp=0000000000000000000000000000000000000000;hpb=8ba801e005e6134f76cde3a909271d65bbe79eca;p=csit.git

diff --git a/tests/perf/Short_IPv4_Policer_Intel-X520-DA2.robot b/tests/perf/Short_IPv4_Policer_Intel-X520-DA2.robot
new file mode 100644
index 0000000000..e6967dc1da
--- /dev/null
+++ b/tests/perf/Short_IPv4_Policer_Intel-X520-DA2.robot
@@ -0,0 +1,212 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance.robot
+| Library | resources.libraries.python.Policer
+| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} | WITH NAME | dut1_v4
+| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} | WITH NAME | dut2_v4
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | PERFTEST_SHORT
+| ...        | NIC_Intel-X520-DA2
+| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
+| ... | L3 | Intel-X520-DA2
+| Suite Teardown | 3-node Performance Suite Teardown
+| Test Setup | Setup all DUTs before test
+| Test Teardown | Run Keywords | Remove startup configuration of VPP from all DUTs
+| ...           | AND          | Show vpp trace dump on all DUTs
+| Documentation | *Reference NDR throughput IPv4 policer verify test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4
+| ... | routing and two static IPv4 /24 route entries and policer with 2R3C
+| ... | color-aware configuration. Policer is applied on links TG - DUT1 and
+| ... | DUT2 - TG. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
+| ... | *[Ver] TG verification:* In short performance tests, TG verifies
+| ... | DUTs' throughput at ref-NDR (reference Non Drop Rate) with zero packet
+| ... | loss tolerance. Ref-NDR value is periodically updated acording to
+| ... | formula: ref-NDR = 0.9x NDR, where NDR is found in RFC2544 long
+| ... | performance tests for the same DUT configuration. Test packets are
+| ... | generated by TG on links to DUTs. TG traffic profile contains two L3
+| ... | flow-groups (flow-group per direction, 253 flows per flow-group) with
+| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61
+| ... | and static payload. MAC addresses are matching MAC addresses of the
+| ... | TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC2698.
+
+*** Variables ***
+| ${cir}= | ${100}
+| ${eir}= | ${100}
+| ${cb}= | ${100}
+| ${eb}= | ${100}
+
+*** Test Cases ***
+| TC01: Verify 64B ref-NDR at 2x 3.1Mpps - DUT IPv4 2r3c-ca policer - 1thread 1core 1rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and policer config with 1 thread, 1 phy \
+| | ... | core, 1 receive queue per NIC port. [Ver] Verify ref-NDR for 64 \
+| | ... | Byte frames using single trial throughput test.
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
+| | ${framesize}= | Set Variable | 64
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 3.1mpps
+| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
+| | And   Add No Multi Seg to all DUTs
+| | And   Apply startup configuration on all VPP DUTs
+| | And   IPv4 forwarding initialized in a 3-node circular topology
+| | And   IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
+| | Then  Traffic should pass with no loss | ${duration} | ${rate}
+| | ...                                    | ${framesize} | 3-node-IPv4
+
+| TC02: Verify 1518B ref-NDR at 2x 812.74kpps - DUT IPv4 2r3c-ca policer - 1thread 1core 1rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and policer config with 1 thread, 1 phy \
+| | ... | core, 1 receive queue per NIC port. [Ver] Verify ref-NDR for 1518 \
+| | ... | Byte frames using single trial throughput test.
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
+| | ${framesize}= | Set Variable | 1518
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 812743pps
+| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
+| | And   Add No Multi Seg to all DUTs
+| | And   Apply startup configuration on all VPP DUTs
+| | When  IPv4 forwarding initialized in a 3-node circular topology
+| | And   IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
+| | Then  Traffic should pass with no loss | ${duration} | ${rate}
+| | ...                                    | ${framesize} | 3-node-IPv4
+
+| TC03: Verify 9000B ref-NDR at 2x 138.58kpps - DUT IPv4 2r3c-ca policer - 1thread 1core 1rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and policer config with 1 thread, 1 phy \
+| | ... | core, 1 receive queue per NIC port. [Ver] Verify ref-NDR for 9000 \
+| | ... | Byte frames using single trial throughput test.
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
+| | ${framesize}= | Set Variable | 9000
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 138580pps
+| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
+| | And   Apply startup configuration on all VPP DUTs
+| | And   IPv4 forwarding initialized in a 3-node circular topology
+| | And   IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ...                                   | ${framesize} | 3-node-IPv4
+
+| TC04: Verify 64B ref-NDR at 2x 5.6Mpps - DUT IPv4 2r3c-ca policer - 2thread 2core 1rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and policer config with 2 threads, 2 \
+| | ... | phy cores, 1 receive queue per NIC port. [Ver] Verify ref-NDR for \
+| | ... | 64 Byte frames using single trial throughput test.
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
+| | ${framesize}= | Set Variable | 64
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 5.6mpps
+| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
+| | And   Add No Multi Seg to all DUTs
+| | And   Apply startup configuration on all VPP DUTs
+| | And   IPv4 forwarding initialized in a 3-node circular topology
+| | And   IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ...                                   | ${framesize} | 3-node-IPv4
+
+| TC05: Verify 1518B ref-NDR at 2x 812.74kpps - DUT IPv4 2r3c-ca policer - 2thread 2core 1rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and policer config with 2 threads, 2 \
+| | ... | phy cores, 1 receive queue per NIC port. [Ver] Verify ref-NDR for \
+| | ... | 1518 Byte frames using single trial throughput test.
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
+| | ${framesize}= | Set Variable | 1518
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 812743pps
+| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
+| | And   Add No Multi Seg to all DUTs
+| | And   Apply startup configuration on all VPP DUTs
+| | And   IPv4 forwarding initialized in a 3-node circular topology
+| | And   IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ...                                   | ${framesize} | 3-node-IPv4
+
+| TC06: Verify 9000B ref-NDR at 2x 138.58kpps - DUT IPv4 2r3c-ca policer - 2thread 2core 1rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and policer config with 2 threads, 2 \
+| | ... | phy cores, 1 receive queue per NIC port. [Ver] Verify ref-NDR for \
+| | ... | 9000 Byte frames using single trial throughput test.
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
+| | ${framesize}= | Set Variable | 9000
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 138580pps
+| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
+| | And   Apply startup configuration on all VPP DUTs
+| | And   IPv4 forwarding initialized in a 3-node circular topology
+| | And   IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ...                                   | ${framesize} | 3-node-IPv4
+
+| TC07: Verify 64B ref-NDR at 2x 8.9Mpps - DUT IPv4 2r3c-ca policer - 4threads 4cores 2rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and policer config with 4 thread, 4 \
+| | ... | phy core, 2 receive queue per NIC port. [Ver] Verify ref-NDR for 64 \
+| | ... | Byte frames using single trial throughput test.
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
+| | ${framesize}= | Set Variable | 64
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 8.9mpps
+| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
+| | And   Add No Multi Seg to all DUTs
+| | And   Apply startup configuration on all VPP DUTs
+| | And   IPv4 forwarding initialized in a 3-node circular topology
+| | And   IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ...                                   | ${framesize} | 3-node-IPv4
+
+| TC08: Verify 1518B ref-NDR at 2x 812.74kpps - DUT IPv4 2r3c-ca policer - 4threads 4cores 2rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and policer config with 4 thread, 4 \
+| | ... | phy core, 2 receive queue per NIC port. [Ver] Verify ref-NDR for \
+| | ... | 1518 Byte frames using single trial throughput test.
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
+| | ${framesize}= | Set Variable | 1518
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 812743pps
+| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
+| | And   Add No Multi Seg to all DUTs
+| | And   Apply startup configuration on all VPP DUTs
+| | And   IPv4 forwarding initialized in a 3-node circular topology
+| | And   IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ...                                   | ${framesize} | 3-node-IPv4
+
+| TC09: Verify 9000B ref-NDR at 2x 138.58kpps - DUT IPv4 2r3c-ca policer - 4threads 4cores 2rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and policer config with 4 thread, 4 \
+| | ... | phy core, 2 receive queue per NIC port. [Ver] Verify ref-NDR for \
+| | ... | 9000 Byte frames using single trial throughput test.
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
+| | ${framesize}= | Set Variable | 9000
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 138580pps
+| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | And   Add PCI devices to DUTs from 3-node single link topology
+| | And   Apply startup configuration on all VPP DUTs
+| | And   IPv4 forwarding initialized in a 3-node circular topology
+| | And   IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ...                                   | ${framesize} | 3-node-IPv4