X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=tests%2Fsuites%2Fperformance%2FShort_Xconnect_Dot1q_Intel-X520-DA2.robot;h=b2eb1ad9a5e11d2a3ea417806fb88f80a006f46b;hb=7c3e0cc41f55327d6eeb04fe757c6e80064ab28a;hp=864962daa09bca73ed8d79a92ffdf152a7400942;hpb=e2f3f7663bd9bda3b41c877495a2601c9839abd1;p=csit.git

diff --git a/tests/suites/performance/Short_Xconnect_Dot1q_Intel-X520-DA2.robot b/tests/suites/performance/Short_Xconnect_Dot1q_Intel-X520-DA2.robot
index 864962daa0..b2eb1ad9a5 100644
--- a/tests/suites/performance/Short_Xconnect_Dot1q_Intel-X520-DA2.robot
+++ b/tests/suites/performance/Short_Xconnect_Dot1q_Intel-X520-DA2.robot
@@ -20,12 +20,13 @@
 | ... | L2 | Intel-X520-DA2
 | Suite Teardown | 3-node Performance Suite Teardown
 | Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs
-| Documentation | *Reference NDR throughput L2XC verify test cases*
+| Test Teardown | Run Keywords | Remove startup configuration of VPP from all DUTs
+| ...           | AND          | Show vpp trace dump on all DUTs
+| Documentation | *Reference NDR throughput L2XC with 802.1q verify test cases*
 | ...
 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. Dot1q
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. 802.1q
 | ... | tagging is applied on link between DUT1 and DUT2.
 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross-
 | ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
@@ -33,11 +34,12 @@
 | ... | DUTs' throughput at ref-NDR (reference Non Drop Rate) with zero packet
 | ... | loss tolerance. Ref-NDR value is periodically updated acording to
 | ... | formula: ref-NDR = 0.9x NDR, where NDR is found in RFC2544 long
-| ... | performance tests for the same DUT confiiguration. Test packets are
+| ... | performance tests for the same DUT configuration. Test packets are
 | ... | generated by TG on links to DUTs. TG traffic profile contains two L3
 | ... | flow-groups (flow-group per direction, 253 flows per flow-group) with
 | ... | all packets containing Ethernet header, IPv4 header with IP protocol=61
-| ... | and generated payload.
+| ... | and generated payload. MAC addresses are matching MAC addresses of the
+| ... | TG node interfaces.
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
@@ -45,7 +47,7 @@
 | ${tag_rewrite}= | pop-1
 
 *** Test Cases ***
-| TC01: Verify 64B ref-NDR at 2x 2.9Mpps - DUT dot1q - 1thread 1core 1rxq
+| TC01: Verify 64B ref-NDR at 2x 2.9Mpps - DUT 802.1q - 1thread 1core 1rxq
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 64 Byte
@@ -58,7 +60,7 @@
 | | And   Add all PCI devices to all DUTs
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
-| | And   VPP interfaces in path are up
+| | And   VPP interfaces in path are up in a 3-node circular topology
 | | When VLAN dot1q subinterfaces initialized on 3-node topology
 | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
 | | And L2 tag rewrite method setup on interfaces
@@ -70,7 +72,7 @@
 | | Then Traffic should pass with no loss | ${duration} | ${rate}
 | | ...                                   | ${framesize} | 3-node-xconnect
 
-| TC02: Verify 1518B ref-NDR at 2x 720kpps - DUT dot1q - 1thread 1core 1rxq
+| TC02: Verify 1518B ref-NDR at 2x 720kpps - DUT 802.1q - 1thread 1core 1rxq
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 1518 Byte
@@ -83,7 +85,7 @@
 | | And   Add all PCI devices to all DUTs
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
-| | And   VPP interfaces in path are up
+| | And   VPP interfaces in path are up in a 3-node circular topology
 | | When VLAN dot1q subinterfaces initialized on 3-node topology
 | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
 | | And L2 tag rewrite method setup on interfaces
@@ -95,7 +97,7 @@
 | | Then Traffic should pass with no loss | ${duration} | ${rate}
 | | ...                                   | ${framesize} | 3-node-xconnect
 
-| TC03: Verify 9000B ref-NDR at 2x 120kpps - DUT dot1q - 1thread 1core 1rxq
+| TC03: Verify 9000B ref-NDR at 2x 120kpps - DUT 802.1q - 1thread 1core 1rxq
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 9000 Byte
@@ -107,7 +109,7 @@
 | | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
 | | And   Add all PCI devices to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
-| | And   VPP interfaces in path are up
+| | And   VPP interfaces in path are up in a 3-node circular topology
 | | When VLAN dot1q subinterfaces initialized on 3-node topology
 | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
 | | And L2 tag rewrite method setup on interfaces
@@ -119,7 +121,7 @@
 | | Then Traffic should pass with no loss | ${duration} | ${rate}
 | | ...                                   | ${framesize} | 3-node-xconnect
 
-| TC04: Verify 64B ref-NDR at 2x 7Mpps - DUT dot1q - 2thread 2core 1rxq
+| TC04: Verify 64B ref-NDR at 2x 7Mpps - DUT 802.1q - 2thread 2core 1rxq
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 64 Byte
@@ -132,7 +134,7 @@
 | | And   Add all PCI devices to all DUTs
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
-| | And   VPP interfaces in path are up
+| | And   VPP interfaces in path are up in a 3-node circular topology
 | | When VLAN dot1q subinterfaces initialized on 3-node topology
 | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
 | | And L2 tag rewrite method setup on interfaces
@@ -144,7 +146,7 @@
 | | Then Traffic should pass with no loss | ${duration} | ${rate}
 | | ...                                   | ${framesize} | 3-node-xconnect
 
-| TC05: Verify 1518B ref-NDR at 2x 720kpps - DUT dot1q - 2thread 2core 1rxq
+| TC05: Verify 1518B ref-NDR at 2x 720kpps - DUT 802.1q - 2thread 2core 1rxq
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 1518 Byte
@@ -157,7 +159,7 @@
 | | And   Add all PCI devices to all DUTs
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
-| | And   VPP interfaces in path are up
+| | And   VPP interfaces in path are up in a 3-node circular topology
 | | When VLAN dot1q subinterfaces initialized on 3-node topology
 | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
 | | And L2 tag rewrite method setup on interfaces
@@ -169,7 +171,7 @@
 | | Then Traffic should pass with no loss | ${duration} | ${rate}
 | | ...                                   | ${framesize} | 3-node-xconnect
 
-| TC06: Verify 9000B ref-NDR at 2x 120kpps - DUT dot1q - 2thread 2core 1rxq
+| TC06: Verify 9000B ref-NDR at 2x 120kpps - DUT 802.1q - 2thread 2core 1rxq
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 9000 Byte
@@ -181,7 +183,7 @@
 | | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
 | | And   Add all PCI devices to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
-| | And   VPP interfaces in path are up
+| | And   VPP interfaces in path are up in a 3-node circular topology
 | | When VLAN dot1q subinterfaces initialized on 3-node topology
 | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
 | | And L2 tag rewrite method setup on interfaces
@@ -193,7 +195,7 @@
 | | Then Traffic should pass with no loss | ${duration} | ${rate}
 | | ...                                   | ${framesize} | 3-node-xconnect
 
-| TC07: Verify 64B ref-NDR at 2x 11Mpps - DUT dot1q - 4thread 4core 2rxq
+| TC07: Verify 64B ref-NDR at 2x 11Mpps - DUT 802.1q - 4thread 4core 2rxq
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Verify ref-NDR for 64 Byte
@@ -206,7 +208,7 @@
 | | And   Add all PCI devices to all DUTs
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
-| | And   VPP interfaces in path are up
+| | And   VPP interfaces in path are up in a 3-node circular topology
 | | When VLAN dot1q subinterfaces initialized on 3-node topology
 | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
 | | And L2 tag rewrite method setup on interfaces
@@ -218,7 +220,7 @@
 | | Then Traffic should pass with no loss | ${duration} | ${rate}
 | | ...                                   | ${framesize} | 3-node-xconnect
 
-| TC08: Verify 1518B ref-NDR at 2x 720kpps - DUT dot1q - 4thread 4core 2rxq
+| TC08: Verify 1518B ref-NDR at 2x 720kpps - DUT 802.1q - 4thread 4core 2rxq
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Verify ref-NDR for 1518 Byte
@@ -231,7 +233,7 @@
 | | And   Add all PCI devices to all DUTs
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
-| | And   VPP interfaces in path are up
+| | And   VPP interfaces in path are up in a 3-node circular topology
 | | When VLAN dot1q subinterfaces initialized on 3-node topology
 | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
 | | And L2 tag rewrite method setup on interfaces
@@ -243,7 +245,7 @@
 | | Then Traffic should pass with no loss | ${duration} | ${rate}
 | | ...                                   | ${framesize} | 3-node-xconnect
 
-| TC09: Verify 9000B ref-NDR at 2x 120kpps - DUT dot1q - 4thread 4core 2rxq
+| TC09: Verify 9000B ref-NDR at 2x 120kpps - DUT 802.1q - 4thread 4core 2rxq
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Verify ref-NDR for 9000 Byte
@@ -255,7 +257,7 @@
 | | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
 | | And   Add all PCI devices to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
-| | And   VPP interfaces in path are up
+| | And   VPP interfaces in path are up in a 3-node circular topology
 | | When VLAN dot1q subinterfaces initialized on 3-node topology
 | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
 | | And L2 tag rewrite method setup on interfaces