X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=tests%2Fvpp%2Fdevice%2Fcontainer_memif%2Feth2p-ethip4-ip4base-eth-2memif-1dcr-dev.robot;fp=tests%2Fvpp%2Fdevice%2Fcontainer_memif%2Feth2p-ethip4-ip4base-eth-2memif-1dcr-dev.robot;h=35be8c05f971503b3183ca74dd7421a68339dd80;hb=5a53823d8a6e99072152654ac632bb06a6b467ac;hp=0000000000000000000000000000000000000000;hpb=fcbcfb9aa1bd57fbf187b92a6b1de80899209640;p=csit.git

diff --git a/tests/vpp/device/container_memif/eth2p-ethip4-ip4base-eth-2memif-1dcr-dev.robot b/tests/vpp/device/container_memif/eth2p-ethip4-ip4base-eth-2memif-1dcr-dev.robot
new file mode 100644
index 0000000000..35be8c05f9
--- /dev/null
+++ b/tests/vpp/device/container_memif/eth2p-ethip4-ip4base-eth-2memif-1dcr-dev.robot
@@ -0,0 +1,111 @@
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Library | resources.libraries.python.InterfaceUtil
+| Library | resources.libraries.python.IPv6Util
+| Library | resources.libraries.python.Routing
+| ...
+| Resource | resources/libraries/robot/ip/ip4.robot
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/shared/memif.robot
+| Resource | resources/libraries/robot/shared/testing_path.robot
+| Resource | resources/libraries/robot/shared/traffic.robot
+| ...
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV
+| ... | FUNCTEST | IP4FWD | BASE | ETH | MEMIF | DOCKER
+| ...
+| Test Setup | Set up VPP device test
+| ...
+| Test Teardown | Run Keywords
+| ... | Tear down functional test with container
+| ... | AND | Tear down VPP device test
+| ... | AND | Show Memif on all DUTs | ${nodes}
+| ...
+| Documentation | *IPv4 routing test cases with memif interface*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \
+| ... | single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for IPv4 routing on \
+| ... | both links.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and \
+| ... | two static IPv4 /24 route entries. Container is connected to VPP via \
+| ... | Memif interface. Container is running same VPP version as running on \
+| ... | DUT.
+| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent in \
+| ... | one direction by TG on links to DUT1 and via container; on receive TG \
+| ... | verifies packets for correctness and their IPv4 src-addr, dst-addr and \
+| ... | MAC addresses.
+| ... | *[Ref] Applicable standard specifications:* RFC791, RFC826, RFC792
+
+*** Variables ***
+# IP
+| ${net1}= | 10.0.1.0
+| ${net3}= | 10.0.3.0
+| ${net1_ip1}= | 10.0.1.1
+| ${net1_ip2}= | 10.0.1.2
+| ${net2_ip1}= | 10.0.2.1
+| ${net2_ip2}= | 10.0.2.2
+| ${net3_ip1}= | 10.0.3.1
+| ${net3_ip2}= | 10.0.3.2
+| ${prefix_length}= | 24
+| ${fib_table_2}= | 20
+# Memif
+| ${sock_base}= | memif-DUT1_CNF1
+# Container
+| ${container_engine}= | Docker
+| ${container_chain_topology}= | chain_functional
+
+# TODO: Add update of VPP PIDs after container creation
+*** Test Cases ***
+| tc01-eth2p-ethip4-ip4base-eth-2memif-1dcr-device
+| | [Documentation]
+| | ... | [Top] TG=DUT=DCR. [Enc] Eth-IPv4-ICMPv4. [Cfg] Configure two VRFs to \
+| | ... | route IPv4 traffic through two memif interfaces. Both interfaces are \
+| | ... | configured with IP addresses from the same network. [Ver] Make TG to \
+| | ... | send ICMPv4 Echo Reqest form one TG interface to another one to be \
+| | ... | switched by DUT1; verify header of received packet.
+| | ...
+| | Given Configure path in 2-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
+| | And Set up functional test with containers
+| | And Configure interfaces in path up
+| | When Set up memif interfaces on DUT node | ${dut_node} | ${sock_base}
+| | ... | ${sock_base} | dcr_uuid=${dcr_uuid}
+| | ... | memif_if1=memif_if1 | memif_if2=memif_if2 | rxq=${0} | txq=${0}
+| | And Add Fib Table | ${dut_node} | ${fib_table_2}
+| | And Assign Interface To Fib Table | ${dut_node}
+| | ... | ${memif_if2} | ${fib_table_2}
+| | And Assign Interface To Fib Table | ${dut_node}
+| | ... | ${dut_to_tg_if2} | ${fib_table_2}
+| | And Configure IP addresses on interfaces
+| | ... | ${dut_node} | ${dut_to_tg_if1} | ${net1_ip1} | ${prefix_length}
+| | ... | ${dut_node} | ${memif_if1} | ${net2_ip1} | ${prefix_length}
+| | ... | ${dut_node} | ${memif_if2} | ${net2_ip2} | ${prefix_length}
+| | ... | ${dut_node} | ${dut_to_tg_if2} | ${net3_ip1} | ${prefix_length}
+| | ${memif_if2_key}= | Get interface by sw index | ${nodes['DUT1']}
+| | ... | ${memif_if2}
+| | ${memif_if2_mac}= | Get interface MAC | ${nodes['DUT1']} | ${memif_if2_key}
+| | And Vpp Route Add | ${dut_node} | ${net3} | ${prefix_length} | ${net2_ip2}
+| | ... | ${memif_if1} | resolve_attempts=${NONE} | count=${NONE}
+| | And Vpp Route Add | ${dut_node} | ${net1} | ${prefix_length} | ${net2_ip1}
+| | ... | ${memif_if2} | resolve_attempts=${NONE} | count=${NONE}
+| | ... | vrf=${fib_table_2}
+| | Add IP Neighbor | ${dut_node} | ${memif_if1} | ${net2_ip2}
+| | ... | ${memif_if2_mac}
+| | Add IP Neighbor | ${dut_node} | ${dut_to_tg_if2} | ${net3_ip2}
+| | ... | ${tg_to_dut_if2_mac}
+| | Then Send packet and verify headers
+| | ... | ${tg_node} | ${net1_ip2} | ${net3_ip2}
+| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}
+| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac}