X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=tests%2Fvpp%2Fdevice%2Finterfaces%2Feth2p-ethicmpv4-ip4base-eth-1tap-dev.robot;h=698020266e6e73dd89de94a13503431796ca6f61;hb=HEAD;hp=33ac54098200ac6be0c9b36f5e8a459fcd1f7c91;hpb=3f9fc8d2a471676e04d787f5da139705b13e229c;p=csit.git

diff --git a/tests/vpp/device/interfaces/eth2p-ethicmpv4-ip4base-eth-1tap-dev.robot b/tests/vpp/device/interfaces/eth2p-ethicmpv4-ip4base-eth-1tap-dev.robot
deleted file mode 100644
index 33ac540982..0000000000
--- a/tests/vpp/device/interfaces/eth2p-ethicmpv4-ip4base-eth-1tap-dev.robot
+++ /dev/null
@@ -1,98 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-|
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | ETH | IP4FWD | BASE | IP4BASE | 1TAP | DRV_VFIO_PCI
-|
-| Suite Setup | Setup suite single link | scapy
-| Test Setup | Setup test | namespace
-| Test Teardown | Tear down test | packet_trace | namespace
-|
-| Test Template | Local Template
-|
-| Documentation | *Tap Interface Traffic Tests*
-| ... | *[Top] Network Topologies:* TG=DUT1 2-node topology with two links
-| ... | between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of
-| ... | IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2
-| ... | bridge-domain (L2BD) MAC learning enabled; Split Horizon Groups (SHG)
-| ... | are set depending on test case; Namespaces (NM)
-| ... | are set on DUT1 with attached linux-TAP.
-| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets
-| ... | are sent by TG on link to DUT1; On receipt TG verifies packets
-| ... | for correctness and their IPv4 src-addr, dst-addr, and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:*
-
-*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so
-| ${crypto_type}= | ${None}
-| ${nic_name}= | virtual
-| ${nic_driver}= | vfio-pci
-| ${overhead}= | ${0}
-| ${tap1_VPP_ip}= | 16.0.10.1
-| ${tap1_NM_ip}= | 16.0.10.2
-| ${tap1_NM_mac}= | 02:00:00:00:00:02
-| ${dut_ip_address}= | 192.168.0.1
-| ${tg_ip_address}= | 192.168.0.2
-| ${tg_ip_address_GW}= | 192.168.0.0
-| ${prefix}= | 24
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] On DUT1 configure two interface addresses with IPv4 of which\
-| | ... | one is TAP interface (dut_to_tg_if and TAP) and one is linux-TAP.
-| | ... | [Ver] Packet sent from TG gets to the destination and ICMP-reply is\
-| | ... | received on TG.
-| |
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| |
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| |
-| | Set Test Variable | \${frame_size}
-| |
-| | Given Set Max Rate And Jumbo
-| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
-| | And Pre-initialize layer driver | ${nic_driver}
-| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
-| | When Initialize layer driver | ${nic_driver}
-| | And Initialize layer interface
-| | ${int1}= | And Add Tap Interface | ${dut1} | tap0
-| | And VPP Interface Set IP Address
-| | ... | ${dut1} | ${int1} | ${tap1_VPP_ip} | ${prefix}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1} | ${dut1_if1} | ${dut_ip_address} | ${prefix}
-| | And Set Interface State | ${dut1} | ${int1} | up
-| | And Set Linux Interface MAC | ${dut1} | tap0 | ${tap1_NM_mac}
-| | And Set Linux Interface IP | ${dut1} | tap0 | ${tap1_NM_ip} | ${prefix}
-| | And Add Linux Route
-| | ... | ${dut1} | ${tg_ip_address_GW} | ${prefix} | ${tap1_VPP_ip}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1} | ${dut1_if1} | ${tg_ip_address} | ${tg_if1_mac}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1} | ${int1} | ${tap1_NM_ip} | ${tap1_NM_mac}
-| | Then Send ICMP echo request and verify answer
-| | ... | ${tg} | ${tg_if1} | ${dut1_if1_mac} | ${tg_if1_mac}
-| | ... | ${tap1_NM_ip} | ${tg_ip_address}
-
-*** Test Cases ***
-| tc01-64B-ethicmpv4-ip4base-eth-1tap-dev
-| | [Tags] | 64B
-| | frame_size=${64} | phy_cores=${0}