X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=tests%2Fvpp%2Fdevice%2Finterfaces%2Feth2p-ethicmpv4-ip4base-eth-1tap-dev.robot;h=a3075e57d5b0846e526fede84c66b2e3c8b5652f;hb=14a71b74b414df7616ccb5ada3d50ecb90d96bae;hp=4446b3d203e3eb30102cacb7fa09bc958d099228;hpb=8fc9b28d7a0381981e2cb614b02783b8238f65f2;p=csit.git

diff --git a/tests/vpp/device/interfaces/eth2p-ethicmpv4-ip4base-eth-1tap-dev.robot b/tests/vpp/device/interfaces/eth2p-ethicmpv4-ip4base-eth-1tap-dev.robot
index 4446b3d203..a3075e57d5 100644
--- a/tests/vpp/device/interfaces/eth2p-ethicmpv4-ip4base-eth-1tap-dev.robot
+++ b/tests/vpp/device/interfaces/eth2p-ethicmpv4-ip4base-eth-1tap-dev.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
+# Copyright (c) 2020 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -16,9 +16,10 @@
 |
 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
 | ... | NIC_Virtual | ETH | IP4FWD | BASE | IP4BASE | 1TAP | DRV_VFIO_PCI
-| ... | EXPECTED_FAILING
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | ethicmpv4-ip4base-eth-1tap
 |
-| Suite Setup | Setup suite single link | scapy
+| Suite Setup | Setup suite topology interfaces | scapy
 | Test Setup | Setup test | namespace
 | Test Teardown | Tear down test | packet_trace | namespace
 |
@@ -43,6 +44,10 @@
 | ${crypto_type}= | ${None}
 | ${nic_name}= | virtual
 | ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
 | ${overhead}= | ${0}
 | ${tap1_VPP_ip}= | 16.0.10.1
 | ${tap1_NM_ip}= | 16.0.10.2
@@ -79,18 +84,18 @@
 | | And VPP Interface Set IP Address
 | | ... | ${dut1} | ${int1} | ${tap1_VPP_ip} | ${prefix}
 | | And VPP Interface Set IP Address
-| | ... | ${dut1} | ${dut1_if1} | ${dut_ip_address} | ${prefix}
+| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${dut_ip_address} | ${prefix}
 | | And Set Interface State | ${dut1} | ${int1} | up
 | | And Set Linux Interface MAC | ${dut1} | tap0 | ${tap1_NM_mac}
 | | And Set Linux Interface IP | ${dut1} | tap0 | ${tap1_NM_ip} | ${prefix}
 | | And Add Linux Route
 | | ... | ${dut1} | ${tg_ip_address_GW} | ${prefix} | ${tap1_VPP_ip}
 | | And VPP Add IP Neighbor
-| | ... | ${dut1} | ${dut1_if1} | ${tg_ip_address} | ${tg_if1_mac}
+| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${tg_ip_address} | ${TG_pf1_mac}[0]
 | | And VPP Add IP Neighbor
 | | ... | ${dut1} | ${int1} | ${tap1_NM_ip} | ${tap1_NM_mac}
 | | Then Send ICMP echo request and verify answer
-| | ... | ${tg} | ${tg_if1} | ${dut1_if1_mac} | ${tg_if1_mac}
+| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_vf1_mac}[0] | ${TG_pf1_mac}[0]
 | | ... | ${tap1_NM_ip} | ${tg_ip_address}
 
 *** Test Cases ***