X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=tests%2Fvpp%2Fdevice%2Fip6%2F2n1l-10ge2p1x710-ethip6-ip6base-scapy.robot;fp=tests%2Fvpp%2Fdevice%2Fip6%2F2n1l-10ge2p1x710-ethip6-ip6base-scapy.robot;h=4c3c169016bce3163217f4cf7658389363613bba;hb=9f5525de03c3d1cbca8b7e2a324414308645a9f3;hp=0000000000000000000000000000000000000000;hpb=8079ed2ff7e2fdd41474d286b98cd9be19481f7a;p=csit.git

diff --git a/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-scapy.robot b/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-scapy.robot
new file mode 100644
index 0000000000..4c3c169016
--- /dev/null
+++ b/tests/vpp/device/ip6/2n1l-10ge2p1x710-ethip6-ip6base-scapy.robot
@@ -0,0 +1,83 @@
+# Copyright (c) 2021 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
+| ... | NIC_Intel-X710 | ETH | IP6FWD | BASE | IP6BASE | DRV_VFIO_PCI
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | ethip6-ip6base
+|
+| Suite Setup | Setup suite topology interfaces | scapy
+| Test Setup | Setup test
+| Test Teardown | Tear down test | packet_trace
+|
+| Test Template | Local Template
+|
+| Documentation | *IPv6 routing test cases*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing on \
+| ... | both links.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and \
+| ... | two static IPv6 /64 route entries.
+| ... | *[Ver] TG verification:* Test IPv6 packet is sent in one direction \
+| ... | by TG on links to DUT1; on receive TG verifies packet for correctness \
+| ... | and their IPv6 src-addr, dst-addr and MAC addresses.
+| ... | *[Ref] Applicable standard specifications:* RFC2460, RFC4443, RFC4861
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${overhead}= | ${0}
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Ver] Make TG send IPv6 packet routed over DUT1 interfaces;\
+| | ... | Make TG verify IPv6 packet is correct.
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Initialize IPv6 forwarding in circular topology
+| | ... | remote_host1_ip=3ffe:5f::1 | remote_host2_ip=3ffe:5f::2
+| | Then Send packet and verify headers
+| | ... | ${tg} | 3ffe:5f::1 | 3ffe:5f::2
+| | ... | ${TG_pf1}[0] | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0]
+| | ... | ${TG_pf2}[0] | ${DUT1_vf2_mac}[0] | ${TG_pf2_mac}[0]
+
+*** Test Cases ***
+| 78B-0c-ethip6-ip6base-scapy
+| | [Tags] | 78B | 0C
+| | frame_size=${78} | phy_cores=${0}