X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=tests%2Fvpp%2Fdevice%2Fvm_vhost%2Fip6%2Feth2p-ethipv6-ip6base-eth-2vhost-1vm-dev.robot;fp=tests%2Fvpp%2Fdevice%2Fvm_vhost%2Fip6%2Feth2p-ethipv6-ip6base-eth-2vhost-1vm-dev.robot;h=0000000000000000000000000000000000000000;hb=9f5525de03c3d1cbca8b7e2a324414308645a9f3;hp=c70747552c1655de0de6fa2b3d8d5762b8d56eb4;hpb=8079ed2ff7e2fdd41474d286b98cd9be19481f7a;p=csit.git

diff --git a/tests/vpp/device/vm_vhost/ip6/eth2p-ethipv6-ip6base-eth-2vhost-1vm-dev.robot b/tests/vpp/device/vm_vhost/ip6/eth2p-ethipv6-ip6base-eth-2vhost-1vm-dev.robot
deleted file mode 100644
index c70747552c..0000000000
--- a/tests/vpp/device/vm_vhost/ip6/eth2p-ethipv6-ip6base-eth-2vhost-1vm-dev.robot
+++ /dev/null
@@ -1,96 +0,0 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-|
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Intel-X710 | ETH | IP6FWD | BASE | VHOST | 1VM | DRV_VFIO_PCI
-| ... | RXQ_SIZE_0 | TXQ_SIZE_0 | EXPECTED_FAILING
-| ... | ethipv6-ip6base-eth-2vhost-1vm
-|
-| Suite Setup | Setup suite topology interfaces | scapy
-| Test Setup | Setup test
-| Test Teardown | Tear down test | packet_trace | vhost
-|
-| Test Template | Local Template
-|
-| Documentation | *IPv4 routing test cases with vhost user interface*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \
-| ... | VM and single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing on both links.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and \
-| ... | two static IPv6 /64 route entries. Qemu Guest is connected to VPP via \
-| ... | vhost-user interfaces. Guest is running VPP ip6 interconnecting \
-| ... | vhost-user interfaces.
-| ... | *[Ver] TG verification:* Test IPv6 packets are sent in one direction \
-| ... | by TG on links to DUT1; on receive TG verifies packets for correctness \
-| ... | and their IPv6 src-addr, dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC2460, RFC4443, RFC4861
-
-*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
-| ${crypto_type}= | ${None}
-| ${nic_name}= | Intel-X710
-| ${nic_driver}= | vfio-pci
-| ${nic_rxq_size}= | 0
-| ${nic_txq_size}= | 0
-| ${nic_pfs}= | 2
-| ${nic_vfs}= | 0
-| ${overhead}= | ${0}
-| ${nf_chains}= | ${1}
-| ${nf_nodes}= | ${1}
-| ${nf_dtc} | ${1}
-| ${nf_dtcr} | ${1}
-| ${tg_if1_ip}= | 2001:1::2
-| ${tg_if2_ip}= | 2001:2::2
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | Test uses two VRFs to route IPv6 traffic through two vhost-user \
-| | ... | interfaces. Both interfaces are configured with IP addresses from \
-| | ... | the same network. The VM is running VPP IPv6 forwarding to pass \
-| | ... | packet from one vhost-user interface to the other one.
-| |
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| |
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| |
-| | Set Test Variable | \${frame_size}
-| |
-| | Given Set Max Rate And Jumbo
-| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
-| | And Pre-initialize layer driver | ${nic_driver}
-| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
-| | When Initialize layer driver | ${nic_driver}
-| | And Initialize layer interface
-| | And Initialize IPv6 forwarding with vhost in 2-node circular topology
-| | ... | nf_nodes=${nf_nodes}
-| | And Configure chains of NFs connected via vhost-user
-| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes}
-| | ... | vnf=vppip6_2vhostvr1024 | pinning=${False}
-| | Then Send packet and verify headers
-| | ... | ${tg} | ${tg_if1_ip} | ${tg_if2_ip}
-| | ... | ${TG_pf1}[0] | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0]
-| | ... | ${TG_pf2}[0] | ${DUT1_vf2_mac}[0] | ${TG_pf2_mac}[0]
-
-
-*** Test Cases ***
-| 64B-ethipv6-ip6base-eth-2vhost-1vm-dev
-| | [Tags] | 64B
-| | frame_size=${64} | phy_cores=${0}