X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=tests%2Fvpp%2Fdevice%2Fvm_vhost%2Fl2xc%2Feth2p-eth-l2xcbase-eth-2vhost-1vm-dev.robot;fp=tests%2Fvpp%2Fdevice%2Fvm_vhost%2Fl2xc%2Feth2p-eth-l2xcbase-eth-2vhost-1vm-dev.robot;h=0000000000000000000000000000000000000000;hb=248d1a52e06622dc9eb1dfdd6ca9f6670b4c0bc3;hp=a820bd2cbbb93267d95acdfca841868f946490f3;hpb=5287b5307b3e39c4e13545b0c6ea651ac4014a84;p=csit.git

diff --git a/tests/vpp/device/vm_vhost/l2xc/eth2p-eth-l2xcbase-eth-2vhost-1vm-dev.robot b/tests/vpp/device/vm_vhost/l2xc/eth2p-eth-l2xcbase-eth-2vhost-1vm-dev.robot
deleted file mode 100644
index a820bd2cbb..0000000000
--- a/tests/vpp/device/vm_vhost/l2xc/eth2p-eth-l2xcbase-eth-2vhost-1vm-dev.robot
+++ /dev/null
@@ -1,101 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.Trace
-| Library | resources.libraries.python.NodePath
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/l2/l2_xconnect.robot
-| Resource | resources/libraries/robot/l2/l2_traffic.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/shared/interfaces.robot
-| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV
-| ... | FUNCTEST | L2XCFWD | BASE | ETH | VHOST | 1VM
-| ...
-| Suite Setup | Setup suite single link
-| Test Setup | Setup test
-| Test Teardown | Tear down test | packet_trace | vhost
-| ...
-| Documentation | *L2 cross-connect test cases with vhost user interface*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \
-| ... | VM and single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of \
-| ... | IPv4; Eth-IPv6-ICMPv6 for L2 switching of IPv6.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect \
-| ... | (L2XC) switching. Qemu Guest is connected to VPP via vhost-user \
-| ... | interfaces. Guest is configured with linux bridge interconnecting \
-| ... | vhost-user interfaces.
-| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets \
-| ... | are sent in both directions by TG on links to DUT1 via VM; on receive \
-| ... | TG verifies packets for correctness and their IPv4 (IPv6) src-addr, \
-| ... | dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC792
-
-*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so
-| ${nic_name}= | virtual
-| ${sock1}= | /tmp/sock1
-| ${sock2}= | /tmp/sock2
-
-*** Test Cases ***
-| tc01-eth2p-ethip4-l2xcbase-eth-2vhost-1vm-device
-| | [Documentation]
-| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT configure \
-| | ... | two L2 cross-connects (L2XC), each with one untagged interface \
-| | ... | to TG and untagged i/f to local VM over vhost-user. [Ver] Make \
-| | ... | TG send ICMPv4 Echo Reqs in both directions between two of its \
-| | ... | i/fs to be switched by DUT to and from VM; verify all packets \
-| | ... | are received. [Ref]
-| | ...
-| | Given Add PCI devices to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP Enable Traces On All Duts | ${nodes}
-| | When Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Configure interfaces in path up
-| | And Configure vhost interfaces for L2BD forwarding | ${dut_node}
-| | ... | ${sock1} | ${sock2}
-| | And Configure L2XC | ${dut_node} | ${dut_to_tg_if1} | ${vhost_if1}
-| | And Configure L2XC | ${dut_node} | ${dut_to_tg_if2} | ${vhost_if2}
-| | And Configure VM for vhost L2BD forwarding | ${dut_node} | ${sock1}
-| | ... | ${sock2}
-| | Then Send ICMPv4 bidirectionally and verify received packets | ${tg_node}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if2}
-| | And Get Vhost dump | ${dut_node}
-
-| tc02-eth2p-ethip6-l2xcbase-eth-2vhost-1vm-device
-| | [Documentation]
-| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv6-ICMPv6. [Cfg] On DUT configure \
-| | ... | two L2 cross-connects (L2XC), each with one untagged i/f to TG \
-| | ... | and untagged i/f to local VM over vhost-user. [Ver] Make TG send \
-| | ... | ICMPv6 Echo Reqs in both directions between two of its i/fs to \
-| | ... | be switched by DUT to and from VM; verify all packets are \
-| | ... | received. [Ref]
-| | ...
-| | Given Add PCI devices to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP Enable Traces On All Duts | ${nodes}
-| | When Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Configure interfaces in path up
-| | And Configure vhost interfaces for L2BD forwarding | ${dut_node}
-| | ... | ${sock1} | ${sock2}
-| | And Configure L2XC | ${dut_node} | ${dut_to_tg_if1} | ${vhost_if1}
-| | And Configure L2XC | ${dut_node} | ${dut_to_tg_if2} | ${vhost_if2}
-| | And Configure VM for vhost L2BD forwarding | ${dut_node} | ${sock1}
-| | ... | ${sock2}
-| | Then Send ICMPv6 bidirectionally and verify received packets | ${tg_node}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if2}