X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=tests%2Fvpp%2Fdevice%2Fvm_vhost%2Fl2xc%2Feth2p-ethipv4-l2xcbase-eth-2vhost-1vm-dev.robot;h=d84fe18f0fba33a2705f246a3decd6eeb6170c80;hb=HEAD;hp=039f782b2c5859f4dda84693fdad539568bfe185;hpb=14a71b74b414df7616ccb5ada3d50ecb90d96bae;p=csit.git

diff --git a/tests/vpp/device/vm_vhost/l2xc/eth2p-ethipv4-l2xcbase-eth-2vhost-1vm-dev.robot b/tests/vpp/device/vm_vhost/l2xc/eth2p-ethipv4-l2xcbase-eth-2vhost-1vm-dev.robot
deleted file mode 100644
index 039f782b2c..0000000000
--- a/tests/vpp/device/vm_vhost/l2xc/eth2p-ethipv4-l2xcbase-eth-2vhost-1vm-dev.robot
+++ /dev/null
@@ -1,93 +0,0 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-|
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | ETH | L2XCFWD | BASE | VHOST | 1VM | DRV_VFIO_PCI
-| ... | RXQ_SIZE_0 | TXQ_SIZE_0
-| ... | ethipv4-l2xcbase-eth-2vhost-1vm
-|
-| Suite Setup | Setup suite topology interfaces | scapy
-| Test Setup | Setup test
-| Test Teardown | Tear down test | packet_trace | vhost
-|
-| Test Template | Local Template
-|
-| Documentation | *L2 cross-connect test cases with vhost user interface*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \
-| ... | VM and single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect \
-| ... | (L2XC) switching. Qemu Guest is connected to VPP via vhost-user \
-| ... | interfaces. Guest is configured with VPP l2 cross-connect \
-| ... | interconnecting vhost-user interfaces.
-| ... | *[Ver] TG verification:* Test IPv4 packets with IP protocol=61 are \
-| ... | sent in both directions by TG on links to DUT1 via VM; on receive TG \
-| ... | verifies packets for correctness and their IPv4 src-addr, dst-addr \
-| ... | and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC792
-
-*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so
-| ${crypto_type}= | ${None}
-| ${nic_name}= | virtual
-| ${nic_driver}= | vfio-pci
-| ${nic_rxq_size}= | 0
-| ${nic_txq_size}= | 0
-| ${nic_pfs}= | 2
-| ${nic_vfs}= | 0
-| ${overhead}= | ${0}
-| ${nf_chains}= | ${1}
-| ${nf_nodes}= | ${1}
-| ${nf_dtc} | ${1}
-| ${nf_dtcr} | ${1}
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv4. [Cfg] On DUT configure \
-| | ... | two L2 cross-connects (L2XC), each with one untagged interface \
-| | ... | to TG and untagged i/f to local VM over vhost-user. [Ver] Make \
-| | ... | TG send IPv4 packets in both directions between two of its \
-| | ... | i/fs to be switched by DUT to and from VM; verify all packets \
-| | ... | are received. [Ref]
-| |
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| |
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| |
-| | Set Test Variable | \${frame_size}
-| |
-| | Given Set Max Rate And Jumbo
-| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
-| | And Pre-initialize layer driver | ${nic_driver}
-| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
-| | When Initialize layer driver | ${nic_driver}
-| | And Initialize layer interface
-| | And Initialize L2 xconnect with Vhost-User | nf_nodes=${nf_nodes}
-| | And Configure chains of NFs connected via vhost-user
-| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | vnf=vpp_chain_l2xc
-| | ... | pinning=${False}
-| | Then Send IPv4 bidirectionally and verify received packets | ${tg}
-| | ... | ${TG_pf1}[0] | ${TG_pf2}[0]
-
-*** Test Cases ***
-| tc01-64B-ethipv4-l2xcbase-eth-2vhost-1vm-dev
-| | [Tags] | 64B
-| | frame_size=${64} | phy_cores=${0}