X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=tests%2Fvpp%2Ffunc%2Fhoneycomb%2Fmgmt-cfg-vxlan-apihc-apivat-func.robot;fp=tests%2Fvpp%2Ffunc%2Fhoneycomb%2Fmgmt-cfg-vxlan-apihc-apivat-func.robot;h=e40f9ff9cd754189a0747d9b03311dc3dbb03780;hb=6721e7f09aa95bff6622068332a3f56afad9c87b;hp=0000000000000000000000000000000000000000;hpb=859157b5db45927c7b4bb0b2d575e68805777a86;p=csit.git

diff --git a/tests/vpp/func/honeycomb/mgmt-cfg-vxlan-apihc-apivat-func.robot b/tests/vpp/func/honeycomb/mgmt-cfg-vxlan-apihc-apivat-func.robot
new file mode 100644
index 0000000000..e40f9ff9cd
--- /dev/null
+++ b/tests/vpp/func/honeycomb/mgmt-cfg-vxlan-apihc-apivat-func.robot
@@ -0,0 +1,139 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Variables ***
+# Interfaces to run tests on.
+| ${interface}= | ${node['interfaces']['port1']['name']}
+| ${vx_interface}= | vx_tunnel_test
+# Configuration which will be set and verified during tests.
+| &{vxlan_settings}= | src=192.168.0.2 | dst=192.168.0.3 | vni=${88}
+| ... | encap-vrf-id=${0}
+| &{vxlan_settings2}= | src=192.168.0.4 | dst=192.168.0.5 | vni=${47}
+| ... | encap-vrf-id=${0}
+| &{vxlan_settings_ipv6}= | src=10::10 | dst=10::11 | vni=${88}
+| ... | encap-vrf-id=${0}
+| &{vxlan_settings_ipv6_long}= | src=10:0:0:0:0:0:0:10 | dst=10:0:0:0:0:0:0:11
+| ... | vni=${88} | encap-vrf-id=${0}
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
+| Resource | resources/libraries/robot/honeycomb/interfaces.robot
+| Resource | resources/libraries/robot/honeycomb/vxlan.robot
+# import additional VxLAN settings from resource file
+| Variables | resources/test_data/honeycomb/vxlan.py
+| ...
+| Force Tags | HC_FUNC
+| ...
+| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node}
+| ...
+| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node}
+| ...
+| Documentation | *Honeycomb VxLAN management test suite.*
+
+*** Test Cases ***
+| TC01: Honeycomb configures VxLAN tunnel
+| | [Documentation] | Check if Honeycomb API can configure VxLAN settings.
+| | ...
+| | Given VxLAN Operational Data From Honeycomb Should Be empty
+| | ... | ${node} | ${vx_interface}
+| | And VxLAN Operational Data From VAT Should Be empty | ${node}
+| | When Honeycomb sets interface VxLAN configuration
+| | ... | ${node} | ${vx_interface} | ${vxlan_settings}
+| | Then VxLAN Operational Data From Honeycomb Should Be
+| | ... | ${node} | ${vx_interface} | ${vxlan_settings}
+| | And VxLAN Operational Data From VAT Should Be
+| | ... | ${node} | ${vxlan_settings}
+| | ${vxlan_index}= | Get interface index from oper data
+| | ... | ${node} | ${vx_interface}
+| | Set Suite Variable | ${vxlan_index}
+
+| TC02: Honeycomb disables VxLAN tunnel
+| | [Documentation] | Check if Honeycomb API can reset VxLAN configuration.
+| | ...
+| | Given VxLAN Operational Data From Honeycomb Should Be
+| | ... | ${node} | ${vx_interface} | ${vxlan_settings}
+| | And Honeycomb should not show disabled interface in oper data
+| | ... | ${node} | ${vxlan_index}
+| | And VxLAN Operational Data From VAT Should Be
+| | ... | ${node} | ${vxlan_settings}
+| | When Honeycomb removes VxLAN tunnel settings | ${node} | ${vx_interface}
+| | Then VxLAN Operational Data From Honeycomb Should Be empty
+| | ... | ${node} | ${vx_interface}
+| | And Honeycomb should show disabled interface in oper data
+| | ... | ${node} | ${vxlan_index}
+| | And VxLAN Operational Data From VAT Should Be empty | ${node}
+
+| TC03: Honeycomb can configure VXLAN tunnel after one has been disabled
+| | [Documentation] | Check if Honeycomb API can configure VxLAN settings again\
+| | ... | after previous settings have been removed.
+| | ...
+| | [Teardown] | Honeycomb removes VxLAN tunnel settings
+| | ... | ${node} | ${vx_interface}
+| | ...
+| | Given VxLAN Operational Data From Honeycomb Should Be empty
+| | ... | ${node} | ${vx_interface}
+| | And Honeycomb should show disabled interface in oper data
+| | ... | ${node} | ${vxlan_index}
+| | And VxLAN Operational Data From VAT Should Be empty | ${node}
+| | When Honeycomb sets interface VxLAN configuration
+| | ... | ${node} | ${vx_interface} | ${vxlan_settings2}
+| | Then VxLAN Operational Data From Honeycomb Should Be
+| | ... | ${node} | ${vx_interface} | ${vxlan_settings2}
+| | And Honeycomb should not show disabled interface in oper data
+| | ... | ${node} | ${vxlan_index}
+| | And VxLAN Operational Data From VAT Should Be
+| | ... | ${node} | ${vxlan_settings2}
+
+| TC04: Honeycomb does not set VxLAN configuration on another interface type
+| | [Documentation] | Check if Honeycomb API prevents setting VxLAN\
+| | ... | on incorrect interface.
+| | ...
+| | Given VxLAN Operational Data From Honeycomb Should Be empty
+| | ... | ${node} | ${interface}
+| | And VxLAN Operational Data From VAT Should Be empty | ${node}
+| | When Honeycomb fails setting VxLan on different interface type
+| | ... | ${node} | ${interface} | ${vxlan_settings2}
+| | Then VxLAN Operational Data From Honeycomb Should Be empty
+| | ... | ${node} | ${interface}
+| | And VxLAN Operational Data From VAT Should Be empty
+| | ... | ${node}
+
+| TC05: Honeycomb does not set invalid VxLAN configuration
+| | [Documentation] | Check if Honeycomb API prevents setting incorrect VxLAN\
+| | ... | settings.
+| | ...
+| | Given VxLAN Operational Data From Honeycomb Should Be empty
+| | ... | ${node} | ${vx_interface}
+| | And VxLAN Operational Data From VAT Should Be empty | ${node}
+| | When Honeycomb fails setting invalid VxLAN configuration
+| | ... | ${node} | ${vx_interface} | ${vxlan_invalid}
+| | Then VxLAN Operational Data From Honeycomb Should Be empty
+| | ... | ${node} | ${vx_interface}
+
+| TC06: Honeycomb configures VxLAN tunnel with ipv6
+| | [Documentation] | Check if Honeycomb API can configure VxLAN with\
+| | ... | ipv6 settings.
+| | ...
+| | [Teardown] | Honeycomb removes VxLAN tunnel settings
+| | ... | ${node} | ${vx_interface}
+| | ...
+| | Given VxLAN Operational Data From Honeycomb Should Be empty
+| | ... | ${node} | ${vx_interface}
+| | And VxLAN Operational Data From VAT Should Be empty | ${node}
+| | When Honeycomb sets interface VxLAN configuration
+| | ... | ${node} | ${vx_interface} | ${vxlan_settings_ipv6}
+| | Then VxLAN Operational Data From Honeycomb Should Be
+| | ... | ${node} | ${vx_interface} | ${vxlan_settings_ipv6_long}
+| | And VxLAN Operational Data From VAT Should Be
+| | ... | ${node} | ${vxlan_settings_ipv6}