X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=tests%2Fvpp%2Ffunc%2Fl2xc%2Feth2p-dot1ad-l2xcbase-func.robot;fp=tests%2Fvpp%2Ffunc%2Fl2xc%2Feth2p-dot1ad-l2xcbase-func.robot;h=f030e618f73cb8b4e9ec13c963287480ae2a1fe9;hb=6721e7f09aa95bff6622068332a3f56afad9c87b;hp=0000000000000000000000000000000000000000;hpb=859157b5db45927c7b4bb0b2d575e68805777a86;p=csit.git

diff --git a/tests/vpp/func/l2xc/eth2p-dot1ad-l2xcbase-func.robot b/tests/vpp/func/l2xc/eth2p-dot1ad-l2xcbase-func.robot
new file mode 100644
index 0000000000..f030e618f7
--- /dev/null
+++ b/tests/vpp/func/l2xc/eth2p-dot1ad-l2xcbase-func.robot
@@ -0,0 +1,69 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/shared/testing_path.robot
+| Resource | resources/libraries/robot/l2/tagging.robot
+| Resource | resources/libraries/robot/l2/l2_traffic.robot
+| Library  | resources.libraries.python.Trace
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | VM_ENV
+| Test Setup | Set up functional test
+| Test Teardown | Tear down functional test
+| Documentation | *L2 cross-connect with QinQ test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology with
+| ... | single links between nodes.
+| ... | *[Enc] Packet encapsulations:* Eth-dot1ad-IPv4-ICMPv4 on DUT1-DUT2,
+| ... | Eth-IPv4-ICMPv4 on TG-DUTn for L2 switching of IPv4.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2
+| ... | cross-connect (L2XC) switching with 802.1ad QinQ VLAN tag push and pop.
+| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are
+| ... | sent in both directions by TG on links to DUT1 and DUT2; on receive TG
+| ... | verifies packets for correctness and their IPv4 src-addr, dst-addr and
+| ... | MAC addresses.
+| ... | *[Ref] Applicable standard specifications:* IEEE 802.1ad.
+
+*** Variables ***
+| ${subid}= | 10
+| ${outer_vlan_id}= | 100
+| ${inner_vlan_id}= | 200
+| ${type_subif}= | two_tags
+| ${tag_rewrite_method}= | pop-2
+
+*** Test Cases ***
+| TC01: DUT1 and DUT2 with L2XC and two VLAN push-pop switch ICMPv4 between two TG links
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on \
+| | ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On DUT1 and DUT2
+| | ... | configure L2 cross-connect (L2XC), each with one interface to TG
+| | ... | and one Ethernet interface towards the other DUT; each DUT
+| | ... | pushes two VLAN tags on packets received from local TG, and
+| | ... | popping two VLAN tags on packets transmitted to local TG. [Ver]
+| | ... | Make TG send ICMPv4 Echo Req in both directions between two of
+| | ... | its interfaces to be switched by DUT1 and DUT2; verify all
+| | ... | packets are received. [Ref] IEEE 802.1ad.
+| | Given Configure path in 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in 3-node circular topology up
+| | When Initialize VLAN sub-interfaces in 3-node circular topology
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut2_node} | ${dut2_to_dut1} | ${subid}
+| | ... | ${outer_vlan_id} | ${inner_vlan_id} | ${type_subif}
+| | And Configure L2 tag rewrite method on interfaces
+| | ... | ${dut1_node} | ${subif_index_1} | ${dut2_node} | ${subif_index_2}
+| | ... | ${tag_rewrite_method}
+| | And Connect interfaces and VLAN sub-interfaces using L2XC
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${subif_index_1}
+| | ... | ${dut2_node} | ${dut2_to_tg} | ${subif_index_2}
+| | Then Send ICMP packet and verify received packet
+| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}