X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=tests%2Fvpp%2Fperf%2Fcrypto%2F40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr.robot;fp=tests%2Fvpp%2Fperf%2Fcrypto%2F40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr.robot;h=0000000000000000000000000000000000000000;hb=5e6145a4260ffce1c302e94b9b241851f90838e1;hp=c6ff69c3078abfba9364bbe47c82e789709b8433;hpb=5221220aa5a893e93d78ba31f84b0ad4d6245ec3;p=csit.git

diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr.robot
deleted file mode 100644
index c6ff69c307..0000000000
--- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr.robot
+++ /dev/null
@@ -1,152 +0,0 @@
-# Copyright (c) 2018 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| Resource | resources/libraries/robot/crypto/ipsec.robot
-| Resource | resources/libraries/robot/overlay/lispgpe.robot
-| ...
-| Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR | IP4FWD
-| ... | LISPGPE | IPSEC | IPSECHW | IPSECTRAN | ENCAP | IP4UNRLAY | IP4OVRLAY
-| ... | NIC_Intel-XL710
-| ...
-| Suite Setup | Set up IPSec performance test suite | L3 | Intel-XL710
-| ... | HW_DH895xcc
-| ...
-| Suite Teardown | Tear down 3-node performance topology
-| ...
-| Test Setup | Set up performance test
-| ...
-| Test Teardown | Tear down performance mrr test
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | *IPv4 IPsec transport mode performance test suite.*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,\
-| ... | Eth-IPv4-IPSec-LISPGPE-IPv4 on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* Each DUT is configured with LISP and IPsec\
-| ... | in each direction. IPsec is in transport mode. DUTs get IPv4 traffic\
-| ... | from TG, encrypt it and send to another DUT, where packets are\
-| ... | decrypted and sent back to TG.
-| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
-| ... | at line rate and reports total received/sent packets over trial period.
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, number of flows per flow-group equals to\
-| ... | number of IPSec tunnels) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and\
-| ... | static payload. MAC addresses are matching MAC addresses of the TG\
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address)\
-| ... | field is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC6830, RFC4303 and\
-| ... | RFC2544.
-
-*** Variables ***
-# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps
-| ${s_24.5G}= | ${24500000000}
-# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps
-| ${s_18.75Mpps}= | ${18750000}
-| ${dut2_spi}= | ${1000}
-| ${dut1_spi}= | ${1001}
-| ${ESP_PROTO}= | ${50}
-| ${overhead}= | ${54}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\
-| | ... | IPsec is in transport mode.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\
-| | ... | trial throughput test.
-| | ...
-| | ... | *Arguments:*
-| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | ${encr_alg} = | Crypto Alg AES CBC 128
-| | ${auth_alg} = | Integ Alg SHA1 96
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
-| | ... | ${s_24.5G} | ${framesize} | overhead=${overhead}
-| | ... | pps_limit=${s_18.75Mpps}
-| | And Add cryptodev to all DUTs | ${phy_cores}
-| | And Add DPDK dev default RXD to all DUTs | 2048
-| | And Add DPDK dev default TXD to all DUTs | 2048
-| | And Apply startup configuration on all VPP DUTs
-| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg}
-| | When Initialize LISP GPE IPv4 over IPsec in 3-node circular topology
-| | ... | ${encr_alg} | ${auth_alg}
-| | Then Traffic should pass with maximum rate
-| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
-
-*** Test Cases ***
-| tc01-64B-1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr
-| | [Tags] | 64B | 1C
-| | framesize=${64} | phy_cores=${1}
-
-| tc02-64B-2c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr
-| | [Tags] | 64B | 2C
-| | framesize=${64} | phy_cores=${2}
-
-| tc03-64B-4c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr
-| | [Tags] | 64B | 4C
-| | framesize=${64} | phy_cores=${4}
-
-| tc04-1518B-1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr
-| | [Tags] | 1518B | 1C
-| | framesize=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr
-| | [Tags] | 1518B | 2C
-| | framesize=${1518} | phy_cores=${2}
-
-| tc06-1518B-4c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr
-| | [Tags] | 1518B | 4C
-| | framesize=${1518} | phy_cores=${4}
-
-| tc07-9000B-1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr
-| | [Tags] | 9000B | 1C
-| | framesize=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr
-| | [Tags] | 9000B | 2C
-| | framesize=${9000} | phy_cores=${2}
-
-| tc09-9000B-4c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr
-| | [Tags] | 9000B | 4C
-| | framesize=${9000} | phy_cores=${4}
-
-| tc10-IMIX-1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr
-| | [Tags] | IMIX | 1C
-| | framesize=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr
-| | [Tags] | IMIX | 2C
-| | framesize=IMIX_v4_1 | phy_cores=${2}
-
-| tc12-IMIX-4c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr
-| | [Tags] | IMIX | 4C
-| | framesize=IMIX_v4_1 | phy_cores=${4}