X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=tests%2Fvpp%2Fperf%2Fip4%2F10ge2p1x520-ethip4-ip4base-iacldstbase-ndrchk.robot;h=d061928f36fddaa6978e880db7411c296b5e1abd;hb=70068307d35abcd40abbcd9275bcb836d2cdbae6;hp=3fc4c52e974b08223a3609d8a773365773177d29;hpb=5906589057ce7ed9e1182bc93381dee42c79f2a4;p=csit.git

diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-iacldstbase-ndrchk.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-iacldstbase-ndrchk.robot
index 3fc4c52e97..d061928f36 100644
--- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-iacldstbase-ndrchk.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-iacldstbase-ndrchk.robot
@@ -13,10 +13,6 @@
 
 *** Settings ***
 | Resource | resources/libraries/robot/performance/performance_setup.robot
-| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']}
-| ... | WITH NAME | dut1_v4
-| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']}
-| ... | WITH NAME | dut2_v4
 | ...
 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK
 | ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | FEATURE | IACLDST
@@ -53,19 +49,25 @@
 # Traffic profile:
 | ${traffic_profile} | trex-sl-3n-ethip4-ip4src253
 
-*** Test Cases ***
-| tc01-64B-1t1c-ethip4-ip4base-iacldstbase-ndrchk
+*** Keywords ***
+| Check NDR for ethip4-ip4base-iacldstbase
 | | [Documentation]
-| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
-| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Verify
-| | ... | ref-NDR for 64 Byte frames using single trial throughput test
-| | ... | at 2x 3.6mpps.
-| | [Tags] | 64B | 1T1C | STHREAD
-| | ${framesize}= | Set Variable | ${64}
-| | ${rate}= | Set Variable | 3.6mpps
-| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\
+| | ... | phy core(s), ${rxq} receive queue(s) per NIC port.
+| | ... | [Ver] Verify ref-NDR for ${framesize} frames using single trial\
+| | ... | throughput test at 2x ${rate}.
+| | ...
+| | [Arguments] | ${framesize} | ${rate} | ${wt} | ${rxq}
+| | ...
+| | # Test Variables required for test teardown
+| | Set Test Variable | ${framesize}
+| | Set Test Variable | ${rate}
+| | ${get_framesize}= | Get Frame Size | ${framesize}
+| | ...
+| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
 | | And Add PCI devices to DUTs in 3-node single link topology
-| | And Add no multi seg to all DUTs
+| | And Run Keyword If | ${get_framesize} < ${1522}
+| | ... | Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize IPv4 forwarding in 3-node circular topology
 | | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
@@ -82,8 +84,20 @@
 | | ... | ip4 | dst | 10.10.10.2
 | | And Vpp Enable Input Acl Interface
 | | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx}
-| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | ${traffic_profile}
+| | Then Traffic should pass with no loss | ${perf_trial_duration}
+| | ... | ${rate} | ${framesize} | ${traffic_profile}
+
+*** Test Cases ***
+| tc01-64B-1t1c-ethip4-ip4base-iacldstbase-ndrchk
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Verify
+| | ... | ref-NDR for 64 Byte frames using single trial throughput test
+| | ... | at 2x 3.6mpps.
+| | [Tags] | 64B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check NDR for ethip4-ip4base-iacldstbase
+| | framesize=${64} | rate=3.6mpps | wt=1 | rxq=1
 
 | tc02-1518B-1t1c-ethip4-ip4base-iacldstbase-ndrchk
 | | [Documentation]
@@ -92,29 +106,9 @@
 | | ... | ref-NDR for 1518 Byte frames using single trial throughput test
 | | ... | at 2x 812743pps.
 | | [Tags] | 1518B | 1T1C | STHREAD
-| | ${framesize}= | Set Variable | ${1518}
-| | ${rate}= | Set Variable | 812743pps
-| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
-| | And Add no multi seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize IPv4 forwarding in 3-node circular topology
-| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
-| | ... | ${dut1} | ip4 | dst
-| | And Vpp Configures Classify Session L3
-| | ... | ${dut1} | permit | ${table_idx} | ${skip_n} | ${match_n}
-| | ... | ip4 | dst | 20.20.20.2
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1} | ${dut1_if1} | ip4 | ${table_idx}
-| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
-| | ... | ${dut2} | ip4 | dst
-| | And Vpp Configures Classify Session L3
-| | ... | ${dut2} | permit | ${table_idx} | ${skip_n} | ${match_n}
-| | ... | ip4 | dst | 10.10.10.2
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx}
-| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | ${traffic_profile}
+| | ...
+| | [Template] | Check NDR for ethip4-ip4base-iacldstbase
+| | framesize=${1518} | rate=812743pps | wt=1 | rxq=1
 
 | tc03-9000B-1t1c-ethip4-ip4base-iacldstbase-ndrchk
 | | [Documentation]
@@ -123,28 +117,9 @@
 | | ... | ref-NDR for 9000 Byte frames using single trial throughput test
 | | ... | at 2x 138580pps.
 | | [Tags] | 9000B | 1T1C | STHREAD
-| | ${framesize}= | Set Variable | ${9000}
-| | ${rate}= | Set Variable | 138580pps
-| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize IPv4 forwarding in 3-node circular topology
-| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
-| | ... | ${dut1} | ip4 | dst
-| | And Vpp Configures Classify Session L3
-| | ... | ${dut1} | permit | ${table_idx} | ${skip_n} | ${match_n}
-| | ... | ip4 | dst | 20.20.20.2
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1} | ${dut1_if1} | ip4 | ${table_idx}
-| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
-| | ... | ${dut2} | ip4 | dst
-| | And Vpp Configures Classify Session L3
-| | ... | ${dut2} | permit | ${table_idx} | ${skip_n} | ${match_n}
-| | ... | ip4 | dst | 10.10.10.2
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx}
-| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | ${traffic_profile}
+| | ...
+| | [Template] | Check NDR for ethip4-ip4base-iacldstbase
+| | framesize=${9000} | rate=138580pps | wt=1 | rxq=1
 
 | tc04-64B-2t2c-ethip4-ip4base-iacldstbase-ndrchk
 | | [Documentation]
@@ -153,29 +128,9 @@
 | | ... | ref-NDR for 64 Byte frames using single trial throughput test
 | | ... | at 2x 6.3mpps.
 | | [Tags] | 64B | 2T2C | MTHREAD
-| | ${framesize}= | Set Variable | ${64}
-| | ${rate}= | Set Variable | 6.3mpps
-| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
-| | And Add no multi seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize IPv4 forwarding in 3-node circular topology
-| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
-| | ... | ${dut1} | ip4 | dst
-| | And Vpp Configures Classify Session L3
-| | ... | ${dut1} | permit | ${table_idx} | ${skip_n} | ${match_n}
-| | ... | ip4 | dst | 20.20.20.2
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1} | ${dut1_if1} | ip4 | ${table_idx}
-| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
-| | ... | ${dut2} | ip4 | dst
-| | And Vpp Configures Classify Session L3
-| | ... | ${dut2} | permit | ${table_idx} | ${skip_n} | ${match_n}
-| | ... | ip4 | dst | 10.10.10.2
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx}
-| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | ${traffic_profile}
+| | ...
+| | [Template] | Check NDR for ethip4-ip4base-iacldstbase
+| | framesize=${64} | rate=6.3mpps | wt=2 | rxq=1
 
 | tc05-1518B-2t2c-ethip4-ip4base-iacldstbase-ndrchk
 | | [Documentation]
@@ -184,29 +139,9 @@
 | | ... | ref-NDR for 1518 Byte frames using single trial throughput test
 | | ... | at 2x 812743pps.
 | | [Tags] | 1518B | 2T2C | MTHREAD
-| | ${framesize}= | Set Variable | ${1518}
-| | ${rate}= | Set Variable | 812743pps
-| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
-| | And Add no multi seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize IPv4 forwarding in 3-node circular topology
-| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
-| | ... | ${dut1} | ip4 | dst
-| | And Vpp Configures Classify Session L3
-| | ... | ${dut1} | permit | ${table_idx} | ${skip_n} | ${match_n}
-| | ... | ip4 | dst | 20.20.20.2
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1} | ${dut1_if1} | ip4 | ${table_idx}
-| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
-| | ... | ${dut2} | ip4 | dst
-| | And Vpp Configures Classify Session L3
-| | ... | ${dut2} | permit | ${table_idx} | ${skip_n} | ${match_n}
-| | ... | ip4 | dst | 10.10.10.2
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx}
-| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | ${traffic_profile}
+| | ...
+| | [Template] | Check NDR for ethip4-ip4base-iacldstbase
+| | framesize=${1518} | rate=812743pps | wt=2 | rxq=1
 
 | tc06-9000B-2t2c-ethip4-ip4base-iacldstbase-ndrchk
 | | [Documentation]
@@ -215,28 +150,9 @@
 | | ... | ref-NDR for 9000 Byte frames using single trial throughput test
 | | ... | at 2x 138580pps.
 | | [Tags] | 9000B | 2T2C | MTHREAD
-| | ${framesize}= | Set Variable | ${9000}
-| | ${rate}= | Set Variable | 138580pps
-| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize IPv4 forwarding in 3-node circular topology
-| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
-| | ... | ${dut1} | ip4 | dst
-| | And Vpp Configures Classify Session L3
-| | ... | ${dut1} | permit | ${table_idx} | ${skip_n} | ${match_n}
-| | ... | ip4 | dst | 20.20.20.2
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1} | ${dut1_if1} | ip4 | ${table_idx}
-| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
-| | ... | ${dut2} | ip4 | dst
-| | And Vpp Configures Classify Session L3
-| | ... | ${dut2} | permit | ${table_idx} | ${skip_n} | ${match_n}
-| | ... | ip4 | dst | 10.10.10.2
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx}
-| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | ${traffic_profile}
+| | ...
+| | [Template] | Check NDR for ethip4-ip4base-iacldstbase
+| | framesize=${9000} | rate=138580pps | wt=2 | rxq=1
 
 | tc07-64B-4t4c-ethip4-ip4base-iacldstbase-ndrchk
 | | [Documentation]
@@ -245,29 +161,9 @@
 | | ... | ref-NDR for 64 Byte frames using single trial throughput test
 | | ... | at 2x 9.7mpps.
 | | [Tags] | 64B | 4T4C | MTHREAD
-| | ${framesize}= | Set Variable | ${64}
-| | ${rate}= | Set Variable | 9.7mpps
-| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
-| | And Add no multi seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And Initialize IPv4 forwarding in 3-node circular topology
-| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
-| | ... | ${dut1} | ip4 | dst
-| | And Vpp Configures Classify Session L3
-| | ... | ${dut1} | permit | ${table_idx} | ${skip_n} | ${match_n}
-| | ... | ip4 | dst | 20.20.20.2
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1} | ${dut1_if1} | ip4 | ${table_idx}
-| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
-| | ... | ${dut2} | ip4 | dst
-| | And Vpp Configures Classify Session L3
-| | ... | ${dut2} | permit | ${table_idx} | ${skip_n} | ${match_n}
-| | ... | ip4 | dst | 10.10.10.2
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx}
-| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | ${traffic_profile}
+| | ...
+| | [Template] | Check NDR for ethip4-ip4base-iacldstbase
+| | framesize=${64} | rate=9.7mpps | wt=4 | rxq=2
 
 | tc08-1518B-4t4c-ethip4-ip4base-iacldstbase-ndrchk
 | | [Documentation]
@@ -276,29 +172,9 @@
 | | ... | ref-NDR for 1518 Byte frames using single trial throughput test
 | | ... | at 2x 812743pps.
 | | [Tags] | 1518B | 4T4C | MTHREAD
-| | ${framesize}= | Set Variable | ${1518}
-| | ${rate}= | Set Variable | 812743pps
-| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
-| | And Add no multi seg to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize IPv4 forwarding in 3-node circular topology
-| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
-| | ... | ${dut1} | ip4 | dst
-| | And Vpp Configures Classify Session L3
-| | ... | ${dut1} | permit | ${table_idx} | ${skip_n} | ${match_n}
-| | ... | ip4 | dst | 20.20.20.2
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1} | ${dut1_if1} | ip4 | ${table_idx}
-| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
-| | ... | ${dut2} | ip4 | dst
-| | And Vpp Configures Classify Session L3
-| | ... | ${dut2} | permit | ${table_idx} | ${skip_n} | ${match_n}
-| | ... | ip4 | dst | 10.10.10.2
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx}
-| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | ${traffic_profile}
+| | ...
+| | [Template] | Check NDR for ethip4-ip4base-iacldstbase
+| | framesize=${1518} | rate=812743pps | wt=4 | rxq=2
 
 | tc09-9000B-4t4c-ethip4-ip4base-iacldstbase-ndrchk
 | | [Documentation]
@@ -307,25 +183,6 @@
 | | ... | ref-NDR for 9000 Byte frames using single trial throughput test
 | | ... | at 2x 138580pps.
 | | [Tags] | 9000B | 4T4C | MTHREAD
-| | ${framesize}= | Set Variable | ${9000}
-| | ${rate}= | Set Variable | 138580pps
-| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize IPv4 forwarding in 3-node circular topology
-| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
-| | ... | ${dut1} | ip4 | dst
-| | And Vpp Configures Classify Session L3
-| | ... | ${dut1} | permit | ${table_idx} | ${skip_n} | ${match_n}
-| | ... | ip4 | dst | 20.20.20.2
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1} | ${dut1_if1} | ip4 | ${table_idx}
-| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
-| | ... | ${dut2} | ip4 | dst
-| | And Vpp Configures Classify Session L3
-| | ... | ${dut2} | permit | ${table_idx} | ${skip_n} | ${match_n}
-| | ... | ip4 | dst | 10.10.10.2
-| | And Vpp Enable Input Acl Interface
-| | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx}
-| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | ${traffic_profile}
+| | ...
+| | [Template] | Check NDR for ethip4-ip4base-iacldstbase
+| | framesize=${9000} | rate=138580pps | wt=4 | rxq=2