X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=tests%2Fvpp%2Fperf%2Fl2%2F10ge2p1x520-dot1q-l2xcbase-mrr.robot;h=3da3ad3dac818d707142fd7312825cedce5a0286;hb=c9ad9e38e1554a86b9ee95844340799660edca1b;hp=c1051d7a02c19d05d362bd3e22e5201851c85ecf;hpb=ad71afc5baa8008bd5d4ea26f51a71eefe3fbe62;p=csit.git

diff --git a/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2xcbase-mrr.robot b/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2xcbase-mrr.robot
index c1051d7a02..3da3ad3dac 100644
--- a/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2xcbase-mrr.robot
+++ b/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2xcbase-mrr.robot
@@ -17,48 +17,49 @@
 | ...
 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
 | ... | NIC_Intel-X520-DA2 | L2XCFWD | BASE | DOT1Q
+| ...
 | Suite Setup | Set up 3-node performance topology with DUT's NIC model
 | ... | L2 | Intel-X520-DA2
-| Suite Teardown | Tear down 3-node performance topology
 | ...
+| Suite Teardown | Tear down 3-node performance topology
 | ...
 | Test Setup | Set up performance test
 | ...
 | Test Teardown | Tear down performance mrr test
 | ...
-| Test Template | Local template
+| Test Template | Local Template
 | ...
-| Documentation | *Raw results L2XC with 802.1q test cases*
+| Documentation | *Raw results L2XC with IEEE 802.1Q test cases*
 | ...
 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
 | ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. 802.1q\
-| ... | tagging is applied on link between DUT1 and DUT2.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. IEEE\
+| ... | 802.1Q tagging is applied on link between DUT1 and DUT2.
 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross-\
-| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
+| ... | connect. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
 | ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\
 | ... | at line rate and reports total received/sent packets over trial period.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 253 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
+| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per\
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header\
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\
+| ... | addresses of the TG node interfaces.
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
 *** Variables ***
 | ${subid}= | 10
 | ${tag_rewrite}= | pop-1
+| ${overhead}= | ${4}
 # X520-DA2 bandwidth limit
-| ${s_limit} | ${10000000000}
+| ${s_limit}= | ${10000000000}
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
 
 *** Keywords ***
-| Local template
+| Local Template
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2XC config with VLAN dot1q with ${phy_cores} phy
-| | ... | core(s).
+| | ... | [Cfg] Each DUT runs L2XC config with VLAN and uses ${phy_cores}\
+| | ... | physical core(s) for worker threads.
 | | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\
 | | ... | trial throughput test.
 | | ...
@@ -68,19 +69,15 @@
 | | ... | - phy_cores - Number of physical cores. Type: integer
 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
 | | ...
-| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None}
-| | ...
-| | Set Test Variable | ${framesize}
-| | ${get_framesize}= | Get Frame Size | ${framesize}
-| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize}
+| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
 | | ...
 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
 | | And Add PCI devices to all DUTs
-| | And Run Keyword If | ${get_framesize} < ${1522}
-| | ... | Add no multi seg to all DUTs
+| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
+| | ... | ${s_limit} | ${framesize} | overhead=${overhead}
 | | And Apply startup configuration on all VPP DUTs
-| | And Set interfaces in path in 3-node circular topology up
-| | When Initialize VLAN dot1q sub-interfaces in 3-node circular topology
+| | And Set interfaces in path up
+| | When Initialize VLAN dot1q sub-interfaces in circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
 | | And Configure L2 tag rewrite method on interfaces
 | | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2}
@@ -92,50 +89,50 @@
 | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
 
 *** Test Cases ***
-| tc01-64B-1t1c-dot1q-l2xcbase-mrr
+| tc01-64B-1c-dot1q-l2xcbase-mrr
 | | [Tags] | 64B | 1C
-| | phy_cores=${1} | framesize=${64}
-
-| tc02-1518B-1t1c-dot1q-l2xcbase-mrr
-| | [Tags] | 1518B | 1C
-| | phy_cores=${1} | framesize=${1518}
+| | framesize=${64} | phy_cores=${1}
 
-| tc03-9000B-1t1c-dot1q-l2xcbase-mrr
-| | [Tags] | 9000B | 1C
-| | phy_cores=${1} | framesize=${9000}
+| tc02-64B-2c-dot1q-l2xcbase-mrr
+| | [Tags] | 64B | 2C
+| | framesize=${64} | phy_cores=${2}
 
-| tc04-IMIX-1t1c-dot1q-l2xcbase-mrr
-| | [Tags] | IMIX | 1C
-| | phy_cores=${1} | framesize=IMIX_v4_1
+| tc03-64B-4c-dot1q-l2xcbase-mrr
+| | [Tags] | 64B | 4C
+| | framesize=${64} | phy_cores=${4}
 
-| tc05-64B-2t2c-dot1q-l2xcbase-mrr
-| | [Tags] | 64B | 2C
-| | phy_cores=${2} | framesize=${64}
+| tc04-1518B-1c-dot1q-l2xcbase-mrr
+| | [Tags] | 1518B | 1C
+| | framesize=${1518} | phy_cores=${1}
 
-| tc06-1518B-2t2c-dot1q-l2xcbase-mrr
+| tc05-1518B-2c-dot1q-l2xcbase-mrr
 | | [Tags] | 1518B | 2C
-| | phy_cores=${2} | framesize=${1518}
+| | framesize=${1518} | phy_cores=${2}
 
-| tc07-9000B-2t2c-dot1q-l2xcbase-mrr
-| | [Tags] | 9000B | 2C
-| | phy_cores=${2} | framesize=${9000}
-
-| tc08-IMIX-2t2c-dot1q-l2xcbase-mrr
-| | [Tags] | IMIX | 2C
-| | phy_cores=${2} | framesize=IMIX_v4_1
+| tc06-1518B-4c-dot1q-l2xcbase-mrr
+| | [Tags] | 1518B | 4C
+| | framesize=${1518} | phy_cores=${4}
 
-| tc09-64B-4t4c-dot1q-l2xcbase-mrr
-| | [Tags] | 64B | 4C
-| | phy_cores=${4} | framesize=${64}
+| tc07-9000B-1c-dot1q-l2xcbase-mrr
+| | [Tags] | 9000B | 1C
+| | framesize=${9000} | phy_cores=${1}
 
-| tc10-1518B-4t4c-dot1q-l2xcbase-mrr
-| | [Tags] | 1518B | 4C
-| | phy_cores=${4} | framesize=${1518}
+| tc08-9000B-2c-dot1q-l2xcbase-mrr
+| | [Tags] | 9000B | 2C
+| | framesize=${9000} | phy_cores=${2}
 
-| tc11-9000B-4t4c-dot1q-l2xcbase-mrr
+| tc09-9000B-4c-dot1q-l2xcbase-mrr
 | | [Tags] | 9000B | 4C
-| | phy_cores=${4} | framesize=${9000}
+| | framesize=${9000} | phy_cores=${4}
+
+| tc10-IMIX-1c-dot1q-l2xcbase-mrr
+| | [Tags] | IMIX | 1C
+| | framesize=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-dot1q-l2xcbase-mrr
+| | [Tags] | IMIX | 2C
+| | framesize=IMIX_v4_1 | phy_cores=${2}
 
-| tc12-IMIX-4t4c-dot1q-l2xcbase-mrr
+| tc12-IMIX-4c-dot1q-l2xcbase-mrr
 | | [Tags] | IMIX | 4C
-| | phy_cores=${4} | framesize=IMIX_v4_1
+| | framesize=IMIX_v4_1 | phy_cores=${4}