X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=tests%2Fvpp%2Fperf%2Fvm_vhost%2F10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot;h=0976e69f116dcb4caa70e478a2c71703549d16c7;hb=refs%2Fchanges%2F77%2F13377%2F9;hp=211e6b566ed8a060d9b6be70e07e4bb12fa767e3;hpb=cd9235056d6ec7ed21d46027964e945b21710886;p=csit.git

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot
index 211e6b566e..0976e69f11 100644
--- a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot
@@ -42,7 +42,7 @@
 | ... | vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M
 | ... | memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores
 | ... | (1 main core and 4 cores dedicated for io), forwarding mode is set to
-| ... | io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520
+| ... | io, rxd/txd=1024, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520
 | ... | Niantic by Intel.
 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
 | ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
@@ -59,6 +59,7 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
 
 *** Variables ***
+| ${perf_qemu_qsz}= | 1024
 # X520-DA2 bandwidth limit
 | ${s_limit} | ${10000000000}
 | ${vxlan_overhead} | ${50}
@@ -68,17 +69,17 @@
 | ${sock1}= | /tmp/sock-1-${bd_id1}
 | ${sock2}= | /tmp/sock-1-${bd_id2}
 # Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
 
 *** Test Cases ***
 | tc01-64B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
+| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\
 | | ... | 1 receive queue per NIC port.
 | | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
 | | ... | linerate, step 10kpps.
 | | ...
-| | [Tags] | 64B | 1T1C | STHREAD | NDRDISC
+| | [Tags] | 64B | 1C | NDRDISC
 | | ...
 | | ${framesize}= | Set Variable | ${64}
 | | ${min_rate}= | Set Variable | ${10000}
@@ -89,7 +90,7 @@
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add PCI devices to all DUTs
 | | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology
@@ -100,20 +101,18 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
 
 | tc02-64B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
+| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\
 | | ... | 1 receive queue per NIC port.
 | | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
 | | ... | linerate, step 10kpps, LT=0.5%.
 | | ...
-| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | ${64}
 | | ${min_rate}= | Set Variable | ${10000}
@@ -124,7 +123,7 @@
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add PCI devices to all DUTs
 | | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology
@@ -135,8 +134,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -144,12 +141,12 @@
 
 | tc03-1518B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
+| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\
 | | ... | 1 receive queue per NIC port.
 | | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\
 | | ... | linerate, step 10kpps.
 | | ...
-| | [Tags] | 1518B | 1T1C | STHREAD | NDRDISC
+| | [Tags] | 1518B | 1C | NDRDISC
 | | ...
 | | ${framesize}= | Set Variable | ${1518}
 | | ${min_rate}= | Set Variable | ${10000}
@@ -160,7 +157,7 @@
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add PCI devices to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology
 | | ... | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2}
@@ -170,20 +167,18 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
 
 | tc04-1518B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
+| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\
 | | ... | 1 receive queue per NIC port.
 | | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
 | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
 | | ...
-| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | ${1518}
 | | ${min_rate}= | Set Variable | ${10000}
@@ -194,7 +189,7 @@
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add PCI devices to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology
 | | ... | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2}
@@ -204,8 +199,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -213,13 +206,13 @@
 
 | tc05-IMIX-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
+| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\
 | | ... | 1 receive queue per NIC port.
 | | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\
 | | ... | 10GE linerate, step 10kpps.
 | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
 | | ...
-| | [Tags] | IMIX | 1T1C | STHREAD | NDRDISC
+| | [Tags] | IMIX | 1C | NDRDISC
 | | ...
 | | ${framesize}= | Set Variable | IMIX_v4_1
 | | ${avg_framesize}= | Set Variable | ${403.833}
@@ -231,7 +224,7 @@
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add PCI devices to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology
 | | ... | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2}
@@ -241,21 +234,19 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
 
 | tc06-IMIX-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
+| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\
 | | ... | 1 receive queue per NIC port.
 | | ... | [Ver] Find PDR for IMIX_v4_1 frame size using binary search start at\
 | | ... | 10GE linerate, step 10kpps, LT=0.5%.
 | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
 | | ...
-| | [Tags] | IMIX | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | IMIX_v4_1
 | | ${avg_framesize}= | Set Variable | ${403.833}
@@ -267,7 +258,7 @@
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add PCI devices to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology
 | | ... | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2}
@@ -277,8 +268,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -286,12 +275,12 @@
 
 | tc07-64B-2t2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores,\
+| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\
 | | ... | 1 receive queue per NIC port.
 | | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
 | | ... | linerate, step 10kpps.
 | | ...
-| | [Tags] | 64B | 2T2C | MTHREAD | NDRDISC
+| | [Tags] | 64B | 2C | NDRDISC
 | | ...
 | | ${framesize}= | Set Variable | ${64}
 | | ${min_rate}= | Set Variable | ${10000}
@@ -302,7 +291,7 @@
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add PCI devices to all DUTs
 | | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology
@@ -313,20 +302,18 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
 
 | tc08-64B-2t2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores,\
+| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\
 | | ... | 1 receive queue per NIC port.
 | | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
 | | ... | linerate, step 10kpps, LT=0.5%.
 | | ...
-| | [Tags] | 64B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | ${64}
 | | ${min_rate}= | Set Variable | ${10000}
@@ -337,7 +324,7 @@
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add PCI devices to all DUTs
 | | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology
@@ -348,8 +335,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -357,12 +342,12 @@
 
 | tc09-1518B-2t2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores,\
+| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\
 | | ... | 1 receive queue per NIC port.
 | | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\
 | | ... | linerate, step 10kpps.
 | | ...
-| | [Tags] | 1518B | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH
+| | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | ${1518}
 | | ${min_rate}= | Set Variable | ${10000}
@@ -373,7 +358,7 @@
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add PCI devices to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology
 | | ... | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2}
@@ -383,20 +368,18 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
 
 | tc10-1518B-2t2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores,\
+| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\
 | | ... | 1 receive queue per NIC port.
 | | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
 | | ... | linerate, step 10kpps, LT=0.5%.
 | | ...
-| | [Tags] | 1518B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | ${1518}
 | | ${min_rate}= | Set Variable | ${10000}
@@ -407,7 +390,7 @@
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add PCI devices to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology
 | | ... | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2}
@@ -417,8 +400,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -426,13 +407,13 @@
 
 | tc11-IMIX-2t2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores,\
+| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\
 | | ... | 1 receive queue per NIC port.
 | | ... | [Ver] Find NDR for IMIX_v4_1 frame size using binary search start at\
 | | ... | 10GE linerate, step 10kpps.
 | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
 | | ...
-| | [Tags] | IMIX | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH
+| | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | IMIX_v4_1
 | | ${avg_framesize}= | Set Variable | ${403.833}
@@ -444,7 +425,7 @@
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add PCI devices to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology
 | | ... | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2}
@@ -454,21 +435,19 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
 
 | tc12-IMIX-2t2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores,\
+| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\
 | | ... | 1 receive queue per NIC port.
 | | ... | [Ver] Find PDR for IMIX_v4_1 frame size using binary search start at\
 | | ... | 10GE linerate, step 10kpps, LT=0.5%.
 | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
 | | ...
-| | [Tags] | IMIX | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | IMIX_v4_1
 | | ${avg_framesize}= | Set Variable | ${403.833}
@@ -480,7 +459,7 @@
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add PCI devices to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology
 | | ... | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2}
@@ -490,8 +469,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -499,12 +476,12 @@
 
 | tc13-64B-4t4c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores,\
+| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\
 | | ... | 2 receive queues per NIC port.
 | | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
 | | ... | linerate, step 10kpps.
 | | ...
-| | [Tags] | 64B | 4T4C | MTHREAD | NDRDISC
+| | [Tags] | 64B | 4C | NDRDISC
 | | ...
 | | ${framesize}= | Set Variable | ${64}
 | | ${min_rate}= | Set Variable | ${10000}
@@ -515,7 +492,7 @@
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add PCI devices to all DUTs
 | | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology
@@ -526,20 +503,18 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
 
 | tc14-64B-4t4c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores,\
+| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\
 | | ... | 2 receive queues per NIC port.
 | | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
 | | ... | linerate, step 10kpps, LT=0.5%.
 | | ...
-| | [Tags] | 64B | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | ${64}
 | | ${min_rate}= | Set Variable | ${10000}
@@ -550,7 +525,7 @@
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add PCI devices to all DUTs
 | | And Add no multi seg to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology
@@ -561,8 +536,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -570,12 +543,12 @@
 
 | tc15-1518B-4t4c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores,\
+| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\
 | | ... | 2 receive queues per NIC port.
 | | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\
 | | ... | linerate, step 10kpps.
 | | ...
-| | [Tags] | 1518B | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH
+| | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | ${1518}
 | | ${min_rate}= | Set Variable | ${10000}
@@ -586,7 +559,7 @@
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add PCI devices to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology
 | | ... | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2}
@@ -596,20 +569,18 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
 
 | tc16-1518B-4t4c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores,\
+| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\
 | | ... | 2 receive queues per NIC port.
 | | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
 | | ... | linerate, step 10kpps, LT=0.5%.
 | | ...
-| | [Tags] | 1518B | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | ${1518}
 | | ${min_rate}= | Set Variable | ${10000}
@@ -620,7 +591,7 @@
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add PCI devices to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology
 | | ... | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2}
@@ -630,8 +601,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}
@@ -639,13 +608,13 @@
 
 | tc17-IMIX-4t4c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores,\
+| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\
 | | ... | 2 receive queues per NIC port.
 | | ... | [Ver] Find NDR for IMIX_v4_1 frame size using binary search start at\
 | | ... | 10GE linerate, step 10kpps.
 | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
 | | ...
-| | [Tags] | IMIX | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH
+| | [Tags] | IMIX | 4C | NDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | IMIX_v4_1
 | | ${avg_framesize}= | Set Variable | ${403.833}
@@ -657,7 +626,7 @@
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add PCI devices to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology
 | | ... | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2}
@@ -667,21 +636,19 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold}
 
 | tc18-IMIX-4t4c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc
 | | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores,\
+| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\
 | | ... | 2 receive queues per NIC port.
 | | ... | [Ver] Find PDR for IMIX_v4_1 frame size using binary search start at\
 | | ... | 10GE linerate, step 10kpps, LT=0.5%.
 | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
 | | ...
-| | [Tags] | IMIX | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Tags] | IMIX | 4C | PDRDISC | SKIP_PATCH
 | | ...
 | | ${framesize}= | Set Variable | IMIX_v4_1
 | | ${avg_framesize}= | Set Variable | ${403.833}
@@ -693,7 +660,7 @@
 | | ${dut1_vm_refs}= | Create Dictionary
 | | ${dut2_vm_refs}= | Create Dictionary
 | | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add PCI devices to all DUTs
 | | And Apply startup configuration on all VPP DUTs
 | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology
 | | ... | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2}
@@ -703,8 +670,6 @@
 | | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
 | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
 | | ... | ${binary_max} | ${traffic_profile}
 | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance}