X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=tests%2Fvpp%2Fperf%2Fvm_vhost%2F10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot;h=9d1b70d6dcbc53e6f9fce05a6a36833f6fa207f3;hb=50ca85359a75da29371ea3b97d2bccf7653b99d6;hp=04e3ae714cee9ffb9c33d012e68a96a2766ecf2e;hpb=c58cba70baa74588619018a2e8b461592bff1bf4;p=csit.git

diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot
index 04e3ae714c..9d1b70d6dc 100644
--- a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot
+++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
+# Copyright (c) 2020 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -13,22 +13,23 @@
 
 *** Settings ***
 | Resource | resources/libraries/robot/shared/default.robot
-| ...
+|
 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
 | ... | NIC_Intel-X710 | DOT1Q | L2XCFWD | BASE | VHOST | 1VM
 | ... | VHOST_1024 | LBOND | LBOND_VPP | LBOND_MODE_LACP | LBOND_LB_L34
-| ... | LBOND_1L
-| ...
+| ... | LBOND_1L | NF_TESTPMD | DRV_VFIO_PCI
+| ... | 1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm
+|
 | Suite Setup | Setup suite single link | performance
 | Suite Teardown | Tear down suite | performance
-| Test Setup | Setup test
+| Test Setup | Setup test | performance
 | Test Teardown | Tear down test | performance | vhost
-| ...
+|
 | Test Template | Local Template
-| ...
+|
 | Documentation | *RFC2544: Pkt throughput L2XC test cases with vhost and vpp
 | ... | link bonding*
-| ...
+|
 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
 | ... | with single links between nodes.
 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. 802.1q
@@ -36,7 +37,7 @@
 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with VPP
 | ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and
 | ... | DUT2 and L2 cross- connect. Qemu VNFs are \
-| ... | connected to VPP via vhost-user interfaces. Guest is running VPP l2xc \
+| ... | connected to VPP via vhost-user interfaces. Guest is running testpmd \
 | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \
 | ... | tested with ${nic_name}.
 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
@@ -53,8 +54,10 @@
 
 *** Variables ***
 | @{plugins_to_enable}= | dpdk_plugin.so | lacp_plugin.so
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
 | ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${osi_layer}= | L2
 | ${overhead}= | ${4}
 | ${subid}= | 10
 | ${tag_rewrite}= | pop-1
@@ -74,27 +77,29 @@
 | | ... | [Cfg] DUT runs L2XC switching config.
 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
 | | ... | Type: integer, string
 | | ... | - phy_cores - Number of physical cores. Type: integer
 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
+| |
 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
+| |
 | | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
 | | And Add VLAN Strip Offload switch off between DUTs in 3-node single link topology
-| | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
-| | When Initialize L2 xconnect with Vhost-User and VLAN with VPP link bonding in 3-node circular topology
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Initialize L2 xconnect with Vhost-User and VLAN with VPP link bonding in 3-node circular topology
 | | ... | ${subid} | ${tag_rewrite} | ${bond_mode} | ${lb_mode}
 | | And Configure chains of NFs connected via vhost-user
 | | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo}
-| | ... | use_tuned_cfs=${False} | auto_scale=${True} | vnf=vpp_chain_l2xc
+| | ... | use_tuned_cfs=${False} | auto_scale=${True} | vnf=testpmd_io
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***