| | ... | [Ver] Send ICMP packet from first TG interface to configured route
| | ... | destination. Receive packet on the second TG interface.
| | ...
+# HC2VPP-331: Honeycomb fails to assign VRF to interface
+| | [Tags] | EXPECTED_FAILING
+| | ...
| | ${table}= | Set Variable | table1
| | Given Setup interfaces and neighbors for IPv4 routing test
| | When Honeycomb configures routing table
| | ... | verify that each destination MAC was used by exactly 50 packets.
| | ... | Receive packet on the second TG interface.
| | ...
+# HC2VPP-331: Honeycomb fails to assign VRF to interface
+| | [Tags] | EXPECTED_FAILING
+| | ...
| | ${table}= | Set Variable | table2
| | Given Setup interfaces and neighbors for IPv4 routing test
| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if2}
| | ... | ${next_hop1} | ${next_hop_mac1}
| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if2}
| | ... | ${next_hop2} | ${next_hop_mac2}
+| | ...
+# HC2VPP-331: Honeycomb fails to assign VRF to interface
+| | [Tags] | EXPECTED_FAILING
+| | ...
| | When Honeycomb configures routing table
| | ... | ${node} | table2 | ipv4 | ${table2} | ${1}
| | Then Routing data from Honeycomb should contain
| | ... | destination. Make sure no packet is received on the second TG\
| | ... | interface.
| | ...
+# HC2VPP-331: Honeycomb fails to assign VRF to interface
+| | [Tags] | EXPECTED_FAILING
+| | ...
| | ${table}= | Set Variable | table3
| | Given Setup interfaces and neighbors for IPv4 routing test
| | When Honeycomb configures routing table
| | ... | [Ver] Send ICMP packet from first TG interface to configured route
| | ... | destination. Receive packet on the second TG interface.
| | ...
+# HC2VPP-331: Honeycomb fails to assign VRF to interface
+| | [Tags] | EXPECTED_FAILING
+| | ...
| | ${table}= | Set Variable | table4
| | Given Setup interfaces and neighbors for IPv6 routing test
| | When Honeycomb configures routing table
| | ... | verify that each destination MAC was used by exactly 50 packets.
| | ... | Receive packet on the second TG interface.
| | ...
+# HC2VPP-331: Honeycomb fails to assign VRF to interface
+| | [Tags] | EXPECTED_FAILING
+| | ...
| | ${table}= | Set Variable | table5
| | Given Setup interfaces and neighbors for IPv6 routing test
| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if2}