summary |
shortlog |
log |
commit | commitdiff |
review |
tree
raw |
patch |
inline | side by side (from parent 1:
c7b2541)
- Increase timeout when trying to check interface (this is useful if
there are multiple interfaces and dump command take more than
TIMEOUT/NR_IF which is happening quite often).
- Reverse the order of applying MTU and interface UP to try to prevent
API overload during interface initialization phase.
Change-Id: I4e8623963d15b3c0d202172b4c58c43a972bb9cb
Signed-off-by: Peter Mikus <pmikus@cisco.com>
(cherry picked from commit
584345da4f7330f7517e5defd894b4995c2b57b0)
19 files changed:
# Set cpuset.cpus cgroup
skip_cnt = kwargs['cpu_skip']
# Set cpuset.cpus cgroup
skip_cnt = kwargs['cpu_skip']
+ smt_used = CpuUtils.is_smt_enabled(kwargs['node']['cpuinfo'])
if not kwargs['cpu_shared']:
skip_cnt += kwargs['i'] * kwargs['cpu_count']
self.engine.container.cpuset_cpus = \
CpuUtils.cpu_slice_of_list_per_node(node=kwargs['node'],
cpu_node=kwargs['cpuset_mems'],
skip_cnt=skip_cnt,
if not kwargs['cpu_shared']:
skip_cnt += kwargs['i'] * kwargs['cpu_count']
self.engine.container.cpuset_cpus = \
CpuUtils.cpu_slice_of_list_per_node(node=kwargs['node'],
cpu_node=kwargs['cpuset_mems'],
skip_cnt=skip_cnt,
- cpu_cnt=kwargs['cpu_count'],
- smt_used=kwargs['smt_used'])
+ cpu_cnt=1,
+ smt_used=False) \
+ + \
+ CpuUtils.cpu_slice_of_list_per_node(node=kwargs['node'],
+ cpu_node=kwargs['cpuset_mems'],
+ skip_cnt=skip_cnt+1,
+ cpu_cnt=kwargs['cpu_count']-1,
+ smt_used=smt_used)
# Store container instance
self.containers[kwargs['name']] = self.engine.container
# Store container instance
self.containers[kwargs['name']] = self.engine.container
'priority=1',
config_file=SUPERVISOR_CONF))
self.execute('supervisorctl reload')
'priority=1',
config_file=SUPERVISOR_CONF))
self.execute('supervisorctl reload')
+ self.execute('supervisorctl restart vpp')
def restart_vpp(self):
"""Restart VPP service inside a container."""
def restart_vpp(self):
"""Restart VPP service inside a container."""
if node['type'] == NodeType.DUT:
if state == 'up':
if node['type'] == NodeType.DUT:
if state == 'up':
+ state = 'admin-up link-up'
+ state = 'admin-down link-down'
else:
raise ValueError('Unexpected interface state: {}'.format(state))
VatExecutor.cmd_from_template(node, 'set_if_state.vat',
else:
raise ValueError('Unexpected interface state: {}'.format(state))
VatExecutor.cmd_from_template(node, 'set_if_state.vat',
InterfaceUtil.vpp_set_interfaces_mtu_on_node(node, mtu)
@staticmethod
InterfaceUtil.vpp_set_interfaces_mtu_on_node(node, mtu)
@staticmethod
- def vpp_node_interfaces_ready_wait(node, timeout=10):
+ def vpp_node_interfaces_ready_wait(node, timeout=30):
"""Wait until all interfaces with admin-up are in link-up state.
:param node: Node to wait on.
"""Wait until all interfaces with admin-up are in link-up state.
:param node: Node to wait on.
- def vpp_nodes_interfaces_ready_wait(nodes, timeout=10):
+ def vpp_nodes_interfaces_ready_wait(nodes, timeout=30):
"""Wait until all interfaces with admin-up are in link-up state for
listed nodes.
"""Wait until all interfaces with admin-up are in link-up state for
listed nodes.
InterfaceUtil.vpp_node_interfaces_ready_wait(node, timeout)
@staticmethod
InterfaceUtil.vpp_node_interfaces_ready_wait(node, timeout)
@staticmethod
- def all_vpp_interfaces_ready_wait(nodes, timeout=10):
+ def all_vpp_interfaces_ready_wait(nodes, timeout=30):
"""Wait until all interfaces with admin-up are in link-up state for all
nodes in the topology.
"""Wait until all interfaces with admin-up are in link-up state for all
nodes in the topology.
# library
| | ${duts}= | Get Matches | ${nodes} | DUT*
| | :FOR | ${dut} | IN | @{duts}
# library
| | ${duts}= | Get Matches | ${nodes} | DUT*
| | :FOR | ${dut} | IN | @{duts}
-| | | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1} | up
| | | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1}
| | | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1}
-| | | Set Interface State | ${nodes['${dut}']} | ${${dut}_if2} | up
+| | | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1} | up
| | | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if2}
| | | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if2}
-| | | VPP Node Interfaces Ready Wait | ${nodes['${dut}']}
+| | | Set Interface State | ${nodes['${dut}']} | ${${dut}_if2} | up
+| | All VPP Interfaces Ready Wait | ${nodes}
| Initialize IPSec in 3-node circular topology
| | [Documentation]
| Initialize IPSec in 3-node circular topology
| | [Documentation]
| | ... | ${sock1} | ${sock2}
| | Configure L2XC | ${dut2} | ${subif_index_2} | ${vhost_if1}
| | Configure L2XC | ${dut2} | ${dut2_if2} | ${vhost_if2}
| | ... | ${sock1} | ${sock2}
| | Configure L2XC | ${dut2} | ${subif_index_2} | ${vhost_if1}
| | Configure L2XC | ${dut2} | ${dut2_if2} | ${vhost_if2}
+| | All VPP Interfaces Ready Wait | ${nodes}
| Initialize L2 xconnect with Vhost-User and VLAN with VPP link bonding in 3-node circular topology
| | [Documentation]
| Initialize L2 xconnect with Vhost-User and VLAN with VPP link bonding in 3-node circular topology
| | [Documentation]
| | | Run Keyword | ${group}.Construct containers
| | | ... | name=${dut}_${group} | node=${nodes['${dut}']} | mnt=${mnt}
| | | ... | image=${container_image} | cpu_count=${container_cpus}
| | | Run Keyword | ${group}.Construct containers
| | | ... | name=${dut}_${group} | node=${nodes['${dut}']} | mnt=${mnt}
| | | ... | image=${container_image} | cpu_count=${container_cpus}
-| | | ... | cpu_skip=${skip_cpus} | smt_used=${False} | cpuset_mems=${cpu_node}
+| | | ... | cpu_skip=${skip_cpus} | cpuset_mems=${cpu_node}
| | | ... | cpu_shared=${False} | env=${env} | count=${container_count}
| | | ... | install_dkms=${container_install_dkms}
| | Append To List | ${container_groups} | ${group}
| | | ... | cpu_shared=${False} | env=${env} | count=${container_count}
| | | ... | install_dkms=${container_install_dkms}
| | Append To List | ${container_groups} | ${group}
| | | Run Keyword | ${group}.Construct container
| | | ... | name=${dut}_${group} | node=${nodes['${dut}']}
| | | ... | image=${container_image} | cpu_count=${1} | cpu_skip=${0}
| | | Run Keyword | ${group}.Construct container
| | | ... | name=${dut}_${group} | node=${nodes['${dut}']}
| | | ... | image=${container_image} | cpu_count=${1} | cpu_skip=${0}
-| | | ... | smt_used=${False} | cpuset_mems=${cpu_node} | cpu_shared=${True}
+| | | ... | cpuset_mems=${cpu_node} | cpu_shared=${True}
| | | ... | publish=${publish} | command=${command}
| | Append To List | ${container_groups} | ${group}
| | | ... | publish=${publish} | command=${command}
| | Append To List | ${container_groups} | ${group}
| | | Run Keyword | ${group}.Construct container
| | | ... | name=${dut}_${group} | node=${nodes['${dut}']} | image=${image}
| | | ... | cpu_count=${1} | cpu_skip=${0} | cpuset_mems=${cpu_node}
| | | Run Keyword | ${group}.Construct container
| | | ... | name=${dut}_${group} | node=${nodes['${dut}']} | image=${image}
| | | ... | cpu_count=${1} | cpu_skip=${0} | cpuset_mems=${cpu_node}
-| | | ... | smt_used=${False} | cpu_shared=${True} | publish=${publish}
-| | | ... | env=${env}
+| | | ... | cpu_shared=${True} | publish=${publish} | env=${env}
| | Append To List | ${container_groups} | ${group}
| Acquire all '${group}' containers
| | Append To List | ${container_groups} | ${group}
| Acquire all '${group}' containers
| | | Run keyword | ${dut}.Add Unix Nodaemon
| | | Run keyword | ${dut}.Add DPDK Socketmem | 4096,4096
| | | Run keyword | ${dut}.Add DPDK Log Level | debug
| | | Run keyword | ${dut}.Add Unix Nodaemon
| | | Run keyword | ${dut}.Add DPDK Socketmem | 4096,4096
| | | Run keyword | ${dut}.Add DPDK Log Level | debug
-| | | Run keyword | ${dut}.Add DPDK Uio Driver | ${uio_driver}
+| | | Run keyword | ${dut}.Add DPDK Uio Driver
| | | Run keyword | ${dut}.Add Heapsize | 4G
| | | Run keyword | ${dut}.Add Plugin | disable | default
| | | Run keyword | ${dut}.Add Plugin | enable | @{plugins_to_enable}
| | | Run keyword | ${dut}.Add Heapsize | 4G
| | | Run keyword | ${dut}.Add Plugin | disable | default
| | | Run keyword | ${dut}.Add Plugin | enable | @{plugins_to_enable}
| | Vpp Node Interfaces Ready Wait | ${dut1}
| | Start HTTP server params | ${dut1} | ${prealloc_fifos} | ${fifo_size}
| | ... | ${private_segment_size}
| | Vpp Node Interfaces Ready Wait | ${dut1}
| | Start HTTP server params | ${dut1} | ${prealloc_fifos} | ${fifo_size}
| | ... | ${private_segment_size}
-| | Sleep | 30
\ No newline at end of file
| | And Add PCI devices to all DUTs
| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
| | ... | ${s_24.5G} | ${framesize} | pps_limit=${s_18.75Mpps}
| | And Add PCI devices to all DUTs
| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
| | ... | ${s_24.5G} | ${framesize} | pps_limit=${s_18.75Mpps}
-| | And Add DPDK dev default RXD to all DUTs | 2048
-| | And Add DPDK dev default TXD to all DUTs | 2048
| | And Apply startup configuration on all VPP DUTs
| | When Initialize L2 patch
| | Then Traffic should pass with maximum rate
| | And Apply startup configuration on all VPP DUTs
| | When Initialize L2 patch
| | Then Traffic should pass with maximum rate
| | And Add PCI devices to all DUTs
| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
| | ... | ${s_24.5G} | ${framesize} | pps_limit=${s_18.75Mpps}
| | And Add PCI devices to all DUTs
| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
| | ... | ${s_24.5G} | ${framesize} | pps_limit=${s_18.75Mpps}
-| | And Add DPDK dev default RXD to all DUTs | 2048
-| | And Add DPDK dev default TXD to all DUTs | 2048
| | And Apply startup configuration on all VPP DUTs
| | When Initialize L2 patch
| | Then Find NDR and PDR intervals using optimized search
| | And Apply startup configuration on all VPP DUTs
| | When Initialize L2 patch
| | Then Find NDR and PDR intervals using optimized search
| | And Add PCI devices to all DUTs
| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
| | ... | ${s_24.5G} | ${framesize} | pps_limit=${s_18.75Mpps}
| | And Add PCI devices to all DUTs
| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
| | ... | ${s_24.5G} | ${framesize} | pps_limit=${s_18.75Mpps}
-| | And Add DPDK dev default RXD to all DUTs | 2048
-| | And Add DPDK dev default TXD to all DUTs | 2048
| | And Apply startup configuration on all VPP DUTs
| | And Initialize L2 bridge domain in 2-node circular topology
| | Then Traffic should pass with maximum rate
| | And Apply startup configuration on all VPP DUTs
| | And Initialize L2 bridge domain in 2-node circular topology
| | Then Traffic should pass with maximum rate
| | And Add PCI devices to all DUTs
| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
| | ... | ${s_24.5G} | ${framesize} | pps_limit=${s_18.75Mpps}
| | And Add PCI devices to all DUTs
| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
| | ... | ${s_24.5G} | ${framesize} | pps_limit=${s_18.75Mpps}
-| | And Add DPDK dev default RXD to all DUTs | 2048
-| | And Add DPDK dev default TXD to all DUTs | 2048
| | And Apply startup configuration on all VPP DUTs
| | And Initialize L2 bridge domain in 2-node circular topology
| | Then Find NDR and PDR intervals using optimized search
| | And Apply startup configuration on all VPP DUTs
| | And Initialize L2 bridge domain in 2-node circular topology
| | Then Find NDR and PDR intervals using optimized search
| | And Add PCI devices to all DUTs
| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
| | ... | ${s_24.5G} | ${framesize} | pps_limit=${s_18.75Mpps}
| | And Add PCI devices to all DUTs
| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
| | ... | ${s_24.5G} | ${framesize} | pps_limit=${s_18.75Mpps}
-| | And Add DPDK dev default RXD to all DUTs | 2048
-| | And Add DPDK dev default TXD to all DUTs | 2048
| | And Apply startup configuration on all VPP DUTs
| | When Initialize L2 patch
| | Then Traffic should pass with maximum rate
| | And Apply startup configuration on all VPP DUTs
| | When Initialize L2 patch
| | Then Traffic should pass with maximum rate
| | And Add PCI devices to all DUTs
| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
| | ... | ${s_24.5G} | ${framesize} | pps_limit=${s_18.75Mpps}
| | And Add PCI devices to all DUTs
| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
| | ... | ${s_24.5G} | ${framesize} | pps_limit=${s_18.75Mpps}
-| | And Add DPDK dev default RXD to all DUTs | 2048
-| | And Add DPDK dev default TXD to all DUTs | 2048
| | And Apply startup configuration on all VPP DUTs
| | When Initialize L2 patch
| | Then Find NDR and PDR intervals using optimized search
| | And Apply startup configuration on all VPP DUTs
| | When Initialize L2 patch
| | Then Find NDR and PDR intervals using optimized search
| | And Add PCI devices to all DUTs
| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
| | ... | ${s_24.5G} | ${framesize} | pps_limit=${s_18.75Mpps}
| | And Add PCI devices to all DUTs
| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
| | ... | ${s_24.5G} | ${framesize} | pps_limit=${s_18.75Mpps}
-| | And Add DPDK dev default RXD to all DUTs | 2048
-| | And Add DPDK dev default TXD to all DUTs | 2048
| | And Apply startup configuration on all VPP DUTs
| | And Initialize L2 xconnect in 2-node circular topology
| | Then Traffic should pass with maximum rate
| | And Apply startup configuration on all VPP DUTs
| | And Initialize L2 xconnect in 2-node circular topology
| | Then Traffic should pass with maximum rate
| | And Add PCI devices to all DUTs
| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
| | ... | ${s_24.5G} | ${framesize} | pps_limit=${s_18.75Mpps}
| | And Add PCI devices to all DUTs
| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
| | ... | ${s_24.5G} | ${framesize} | pps_limit=${s_18.75Mpps}
-| | And Add DPDK dev default RXD to all DUTs | 2048
-| | And Add DPDK dev default TXD to all DUTs | 2048
| | And Apply startup configuration on all VPP DUTs
| | And Initialize L2 xconnect in 2-node circular topology
| | Then Find NDR and PDR intervals using optimized search
| | And Apply startup configuration on all VPP DUTs
| | And Initialize L2 xconnect in 2-node circular topology
| | Then Find NDR and PDR intervals using optimized search
ip4_address: "172.16.10.2"
driver: i40e
link: link1
ip4_address: "172.16.10.2"
driver: i40e
link: link1
port2:
# s4-t21-tg1-c2/p2 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ab:71"
port2:
# s4-t21-tg1-c2/p2 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ab:71"
ip4_address: "172.16.20.2"
driver: i40e
link: link2
ip4_address: "172.16.20.2"
driver: i40e
link: link2
port3:
# s4-t21-tg1-c2/p3 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ab:72"
port3:
# s4-t21-tg1-c2/p3 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ab:72"
ip4_address: "172.16.70.2"
driver: i40e
link: link7
ip4_address: "172.16.70.2"
driver: i40e
link: link7
port8:
# s4-t21-tg1-c10/p2 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:b1:99"
port8:
# s4-t21-tg1-c10/p2 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:b1:99"
ip4_address: "172.16.70.1"
driver: i40e
link: link7
ip4_address: "172.16.70.1"
driver: i40e
link: link7
port9:
# s4-t21-tg1-c10/p3 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:b1:9a"
port9:
# s4-t21-tg1-c10/p3 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:b1:9a"
ip4_address: "172.16.10.1"
driver: i40e
link: link1
ip4_address: "172.16.10.1"
driver: i40e
link: link1
port2:
# s3-t21-sut1-c2/p2 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ad:89"
port2:
# s3-t21-sut1-c2/p2 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ad:89"
ip4_address: "172.16.20.1"
driver: i40e
link: link2
ip4_address: "172.16.20.1"
driver: i40e
link: link2
port3:
# s3-t21-sut1-c2/p3 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ad:8a"
port3:
# s3-t21-sut1-c2/p3 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ad:8a"
ip4_address: "172.16.10.2"
driver: i40e
link: link1
ip4_address: "172.16.10.2"
driver: i40e
link: link1
port2:
# s6-t22-tg1-c2/p2 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ab:99"
port2:
# s6-t22-tg1-c2/p2 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ab:99"
ip4_address: "172.16.20.2"
driver: i40e
link: link2
ip4_address: "172.16.20.2"
driver: i40e
link: link2
port3:
# s6-t22-tg1-c2/p3 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ab:9a"
port3:
# s6-t22-tg1-c2/p3 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ab:9a"
ip4_address: "172.16.70.2"
driver: i40e
link: link7
ip4_address: "172.16.70.2"
driver: i40e
link: link7
port8:
# s6-t22-tg1-c10/p2 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ab:99"
port8:
# s6-t22-tg1-c10/p2 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ab:99"
ip4_address: "172.16.70.1"
driver: i40e
link: link7
ip4_address: "172.16.70.1"
driver: i40e
link: link7
port9:
# s6-t22-tg1-c10/p3 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ab:9a"
port9:
# s6-t22-tg1-c10/p3 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ab:9a"
ip4_address: "172.16.10.1"
driver: i40e
link: link1
ip4_address: "172.16.10.1"
driver: i40e
link: link1
port2:
# s5-t22-sut1-c2/p2 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:af:a9"
port2:
# s5-t22-sut1-c2/p2 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:af:a9"
ip4_address: "172.16.20.1"
driver: i40e
link: link2
ip4_address: "172.16.20.1"
driver: i40e
link: link2
port3:
# s5-t22-sut1-c2/p3 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:af:aa"
port3:
# s5-t22-sut1-c2/p3 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:af:aa"
ip4_address: "172.16.10.2"
driver: i40e
link: link1
ip4_address: "172.16.10.2"
driver: i40e
link: link1
port2:
# s8-t23-tg1-c2/p2 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:b1:39"
port2:
# s8-t23-tg1-c2/p2 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:b1:39"
ip4_address: "172.16.20.2"
driver: i40e
link: link2
ip4_address: "172.16.20.2"
driver: i40e
link: link2
port3:
# s8-t23-tg1-c2/p3 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:b1:3a"
port3:
# s8-t23-tg1-c2/p3 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:b1:3a"
ip4_address: "172.16.70.2"
driver: i40e
link: link7
ip4_address: "172.16.70.2"
driver: i40e
link: link7
port8:
# s8-t23-tg1-c10/p2 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ab:21"
port8:
# s8-t23-tg1-c10/p2 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ab:21"
ip4_address: "172.16.70.1"
driver: i40e
link: link7
ip4_address: "172.16.70.1"
driver: i40e
link: link7
port9:
# s8-t23-tg1-c10/p3 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ab:22"
port9:
# s8-t23-tg1-c10/p3 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ab:22"
ip4_address: "172.16.10.1"
driver: i40e
link: link1
ip4_address: "172.16.10.1"
driver: i40e
link: link1
port2:
# s7-t23-sut1-c2/p2 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ae:31"
port2:
# s7-t23-sut1-c2/p2 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ae:31"
ip4_address: "172.16.20.1"
driver: i40e
link: link2
ip4_address: "172.16.20.1"
driver: i40e
link: link2
port3:
# s7-t23-sut1-c2/p3 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ae:32"
port3:
# s7-t23-sut1-c2/p3 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ae:32"
ip4_address: "172.16.10.2"
driver: i40e
link: link1
ip4_address: "172.16.10.2"
driver: i40e
link: link1
port2:
# s10-t24-tg1-c2/p2 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:b1:89"
port2:
# s10-t24-tg1-c2/p2 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:b1:89"
ip4_address: "172.16.20.2"
driver: i40e
link: link2
ip4_address: "172.16.20.2"
driver: i40e
link: link2
port3:
# s10-t24-tg1-c2/p3 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:b1:8a"
port3:
# s10-t24-tg1-c2/p3 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:b1:8a"
ip4_address: "172.16.70.2"
driver: i40e
link: link7
ip4_address: "172.16.70.2"
driver: i40e
link: link7
port8:
# s10-t24-tg1-c10/p2 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ae:41"
port8:
# s10-t24-tg1-c10/p2 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ae:41"
ip4_address: "172.16.70.1"
driver: i40e
link: link7
ip4_address: "172.16.70.1"
driver: i40e
link: link7
port9:
# s10-t24-tg1-c10/p3 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ae:42"
port9:
# s10-t24-tg1-c10/p3 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ae:42"
ip4_address: "172.16.10.1"
driver: i40e
link: link1
ip4_address: "172.16.10.1"
driver: i40e
link: link1
port2:
# s9-t24-sut1-c2/p2 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ad:81"
port2:
# s9-t24-sut1-c2/p2 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ad:81"
ip4_address: "172.16.20.1"
driver: i40e
link: link2
ip4_address: "172.16.20.1"
driver: i40e
link: link2
port3:
# s9-t24-sut1-c2/p3 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ad:82"
port3:
# s9-t24-sut1-c2/p3 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ad:82"
ip4_address: "172.16.10.2"
driver: i40e
link: link1
ip4_address: "172.16.10.2"
driver: i40e
link: link1
port2:
# s13-t31-tg1-c2/p2 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:af:59"
port2:
# s13-t31-tg1-c2/p2 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:af:59"
ip4_address: "172.16.20.2"
driver: i40e
link: link2
ip4_address: "172.16.20.2"
driver: i40e
link: link2
port3:
# s13-t31-tg1-c2/p3 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:af:5a"
port3:
# s13-t31-tg1-c2/p3 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:af:5a"
ip4_address: "172.16.70.2"
driver: i40e
link: link7
ip4_address: "172.16.70.2"
driver: i40e
link: link7
port8:
# s13-t31-tg1-c10/p2 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ad:31"
port8:
# s13-t31-tg1-c10/p2 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ad:31"
ip4_address: "172.16.70.1"
driver: i40e
link: link7
ip4_address: "172.16.70.1"
driver: i40e
link: link7
port9:
# s13-t31-tg1-c10/p3 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ad:32"
port9:
# s13-t31-tg1-c10/p3 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ad:32"
ip4_address: "172.16.10.1"
driver: i40e
link: link1
ip4_address: "172.16.10.1"
driver: i40e
link: link1
port2:
# s11-t31-sut1-c2/p2 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:af:39"
port2:
# s11-t31-sut1-c2/p2 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:af:39"
ip4_address: "172.16.120.1"
driver: i40e
link: link21
ip4_address: "172.16.120.1"
driver: i40e
link: link21
port3:
# s11-t31-sut1-c2/p3 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:af:3a"
port3:
# s11-t31-sut1-c2/p3 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:af:3a"
ip4_address: "172.16.20.1"
driver: i40e
link: link2
ip4_address: "172.16.20.1"
driver: i40e
link: link2
port2:
# s12-t31-sut1-c2/p2 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:aa:a9"
port2:
# s12-t31-sut1-c2/p2 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:aa:a9"
ip4_address: "172.16.120.2"
driver: i40e
link: link21
ip4_address: "172.16.120.2"
driver: i40e
link: link21
port3:
# s12-t31-sut1-c2/p3 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:aa:aa"
port3:
# s12-t31-sut1-c2/p3 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:aa:aa"
ip4_address: "172.16.10.2"
driver: i40e
link: link1
ip4_address: "172.16.10.2"
driver: i40e
link: link1
port2:
# s13-t31-tg1-c2/p2 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:af:09"
port2:
# s13-t31-tg1-c2/p2 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:af:09"
ip4_address: "172.16.20.2"
driver: i40e
link: link2
ip4_address: "172.16.20.2"
driver: i40e
link: link2
port3:
# s13-t31-tg1-c2/p3 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:af:0a"
port3:
# s13-t31-tg1-c2/p3 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:af:0a"
ip4_address: "172.16.70.2"
driver: i40e
link: link7
ip4_address: "172.16.70.2"
driver: i40e
link: link7
port8:
# s13-t31-tg1-c10/p2 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ab:e1"
port8:
# s13-t31-tg1-c10/p2 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ab:e1"
ip4_address: "172.16.70.1"
driver: i40e
link: link7
ip4_address: "172.16.70.1"
driver: i40e
link: link7
port9:
# s13-t31-tg1-c10/p3 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ab:e2"
port9:
# s13-t31-tg1-c10/p3 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ab:e2"
ip4_address: "172.16.10.1"
driver: i40e
link: link1
ip4_address: "172.16.10.1"
driver: i40e
link: link1
port2:
# s14-t32-sut1-c2/p2 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ae:61"
port2:
# s14-t32-sut1-c2/p2 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ae:61"
ip4_address: "172.16.120.1"
driver: i40e
link: link21
ip4_address: "172.16.120.1"
driver: i40e
link: link21
port3:
# s14-t32-sut1-c2/p3 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ae:62"
port3:
# s14-t32-sut1-c2/p3 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ae:62"
ip4_address: "172.16.20.1"
driver: i40e
link: link2
ip4_address: "172.16.20.1"
driver: i40e
link: link2
port2:
# s15-t32-sut1-c2/p2 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ae:c1"
port2:
# s15-t32-sut1-c2/p2 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ae:c1"
ip4_address: "172.16.120.2"
driver: i40e
link: link21
ip4_address: "172.16.120.2"
driver: i40e
link: link21
port3:
# s15-t32-sut1-c2/p3 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ae:c2"
port3:
# s15-t32-sut1-c2/p3 - 10GE port1 on Intel NIC x710 4p10GE.
mac_address: "3c:fd:fe:a8:ae:c2"