"""IP Topology Library."""
@staticmethod
"""IP Topology Library."""
@staticmethod
- def initialize_ipv4_forwarding(count=1, pfs=2):
+ def initialize_ipv4_forwarding(count=1, pfs=2, route_prefix=32):
"""
Custom setup of IPv4 forwarding with scalability of IP routes on all
DUT nodes in 2-node / 3-node circular topology.
:param count: Number of routes to configure.
:param pfs: Number of physical interfaces to configure.
"""
Custom setup of IPv4 forwarding with scalability of IP routes on all
DUT nodes in 2-node / 3-node circular topology.
:param count: Number of routes to configure.
:param pfs: Number of physical interfaces to configure.
+ :param route_prefix: Route prefix to configure.
:type count: int
:type pfs: int
:type count: int
:type pfs: int
+ :type route_prefix: int
"""
topology = BuiltIn().get_variable_value("&{topology_info}")
dut = topology["duts"][-1]
"""
topology = BuiltIn().get_variable_value("&{topology_info}")
dut = topology["duts"][-1]
- topology["DUT1"], f"{i}0.0.0.0", 32, gateway=f"1.{l}.1.1",
- interface=dut1_int1, count=count
+ topology["DUT1"], f"{i}0.0.0.0", route_prefix,
+ gateway=f"1.{l}.1.1", interface=dut1_int1, count=count
)
if dut == "DUT2":
IPUtil.vpp_route_add(
)
if dut == "DUT2":
IPUtil.vpp_route_add(
- topology["DUT1"], f"{i+1}0.0.0.0", 32, gateway=f"3.{l}.3.2",
- interface=dut1_int2, count=count
+ topology["DUT1"], f"{i+1}0.0.0.0", route_prefix,
+ gateway=f"3.{l}.3.2", interface=dut1_int2, count=count
- topology["DUT2"], f"{i}0.0.0.0", 32, gateway=f"3.{l}.3.1",
- interface=dut_int1, count=count
+ topology["DUT2"], f"{i}0.0.0.0", route_prefix,
+ gateway=f"3.{l}.3.1", interface=dut_int1, count=count
- topology[dut], f"{i+1}0.0.0.0", 32, gateway=f"2.{l}.2.1",
- interface=dut_int2, count=count
+ topology[dut], f"{i+1}0.0.0.0", route_prefix,
+ gateway=f"2.{l}.2.1", interface=dut_int2, count=count
- def initialize_ipv6_forwarding(count=1, pfs=2):
+ def initialize_ipv6_forwarding(count=1, pfs=2, route_prefix=128):
"""
Custom setup of IPv6 forwarding with scalability of IP routes on all
DUT nodes in 2-node / 3-node circular topology.
:param count: Number of routes to configure.
:param pfs: Number of physical interfaces to configure.
"""
Custom setup of IPv6 forwarding with scalability of IP routes on all
DUT nodes in 2-node / 3-node circular topology.
:param count: Number of routes to configure.
:param pfs: Number of physical interfaces to configure.
+ :param route_prefix: Route prefix to configure.
:type count: int
:type pfs: int
:type count: int
:type pfs: int
+ :type route_prefix: int
"""
topology = BuiltIn().get_variable_value("&{topology_info}")
dut = topology["duts"][-1]
"""
topology = BuiltIn().get_variable_value("&{topology_info}")
dut = topology["duts"][-1]
- topology["DUT1"], f"2{i}00::0", 64,
+ topology["DUT1"], f"2{i}00::0", route_prefix,
gateway=f"2001:{l}::1", interface=dut1_int1, count=count
)
if dut == "DUT2":
IPUtil.vpp_route_add(
gateway=f"2001:{l}::1", interface=dut1_int1, count=count
)
if dut == "DUT2":
IPUtil.vpp_route_add(
- topology["DUT1"], f"2{i+1}00::0", 64,
+ topology["DUT1"], f"2{i+1}00::0", route_prefix,
gateway=f"2003:{l}::2", interface=dut1_int2, count=count
)
IPUtil.vpp_route_add(
gateway=f"2003:{l}::2", interface=dut1_int2, count=count
)
IPUtil.vpp_route_add(
- topology["DUT2"], f"2{i}00::0", 64,
+ topology["DUT2"], f"2{i}00::0", route_prefix,
gateway=f"2003:{l}::1", interface=dut_int1, count=count
)
IPUtil.vpp_route_add(
gateway=f"2003:{l}::1", interface=dut_int1, count=count
)
IPUtil.vpp_route_add(
- topology[dut], f"2{i+1}00::0", 64,
+ topology[dut], f"2{i+1}00::0", route_prefix,
gateway=f"2002:{l}::1", interface=dut_int2, count=count
gateway=f"2002:{l}::1", interface=dut_int2, count=count
- )
\ No newline at end of file
-# Copyright (c) 2023 Cisco and/or its affiliates.
+# Copyright (c) 2024 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing.
| ... |
| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 routing \
| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing.
| ... |
| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 routing \
-| ... | 2x100k static IPv6 /64 route entries. DUT1 is tested with ${nic_name}.
+| ... | 2x100k static IPv6 /128 route entries. DUT1 is tested with ${nic_name}.
| ... |
| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
| ... |
| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
| ${overhead}= | ${0}
| ${rts_per_flow}= | ${100000}
# Traffic profile:
| ${overhead}= | ${0}
| ${rts_per_flow}= | ${100000}
# Traffic profile:
-| ${traffic_profile}= | trex-stl-ethip6-ip6dst${rts_per_flow}
+| ${traffic_profile}= | trex-stl-ethip6-ip6dst${rts_per_flow}-${nic_pfs}p
*** Keywords ***
| Local Template
*** Keywords ***
| Local Template
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
-| | And Initialize IPv6 forwarding with scaling in circular topology
-| | ... | ${rts_per_flow}
+| | And Initialize IPv6 Forwarding | count=${rts_per_flow} | pfs=${nic_pfs}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
-# Copyright (c) 2023 Cisco and/or its affiliates.
+# Copyright (c) 2024 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing.
| ... |
| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 routing \
| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing.
| ... |
| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 routing \
-| ... | 2x100k static IPv6 /64 route entries. DUT1 is tested with ${nic_name}.
+| ... | 2x100k static IPv6 /128 route entries. DUT1 is tested with ${nic_name}.
| ... |
| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
| ... |
| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
| ${overhead}= | ${0}
| ${rts_per_flow}= | ${100000}
# Traffic profile:
| ${overhead}= | ${0}
| ${rts_per_flow}= | ${100000}
# Traffic profile:
-| ${traffic_profile}= | trex-stl-ethip6-ip6dst${rts_per_flow}-rnd
+| ${traffic_profile}= | trex-stl-ethip6-ip6dst-rnd${rts_per_flow}-${nic_pfs}p
*** Keywords ***
| Local Template
*** Keywords ***
| Local Template
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
-| | And Initialize IPv6 forwarding with scaling in circular topology
-| | ... | ${rts_per_flow}
+| | And Initialize IPv6 Forwarding | count=${rts_per_flow} | pfs=${nic_pfs}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
-# Copyright (c) 2023 Cisco and/or its affiliates.
+# Copyright (c) 2024 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing.
| ... |
| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 routing \
| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing.
| ... |
| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 routing \
-| ... | 2x10k static IPv6 /64 route entries. DUT1 is tested with ${nic_name}.
+| ... | 2x10k static IPv6 /128 route entries. DUT1 is tested with ${nic_name}.
| ... |
| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
| ... |
| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
| ${overhead}= | ${0}
| ${rts_per_flow}= | ${10000}
# Traffic profile:
| ${overhead}= | ${0}
| ${rts_per_flow}= | ${10000}
# Traffic profile:
-| ${traffic_profile}= | trex-stl-ethip6-ip6dst${rts_per_flow}
+| ${traffic_profile}= | trex-stl-ethip6-ip6dst${rts_per_flow}-${nic_pfs}p
*** Keywords ***
| Local Template
*** Keywords ***
| Local Template
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
-| | And Initialize IPv6 forwarding with scaling in circular topology
-| | ... | ${rts_per_flow}
+| | And Initialize IPv6 Forwarding | count=${rts_per_flow} | pfs=${nic_pfs}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
-# Copyright (c) 2023 Cisco and/or its affiliates.
+# Copyright (c) 2024 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing.
| ... |
| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 routing \
| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing.
| ... |
| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 routing \
-| ... | 2x10k static IPv6 /64 route entries. DUT1 is tested with ${nic_name}.
+| ... | 2x10k static IPv6 /128 route entries. DUT1 is tested with ${nic_name}.
| ... |
| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
| ... |
| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
| ${overhead}= | ${0}
| ${rts_per_flow}= | ${10000}
# Traffic profile:
| ${overhead}= | ${0}
| ${rts_per_flow}= | ${10000}
# Traffic profile:
-| ${traffic_profile}= | trex-stl-ethip6-ip6dst${rts_per_flow}-rnd
+| ${traffic_profile}= | trex-stl-ethip6-ip6dst-rnd${rts_per_flow}-${nic_pfs}p
*** Keywords ***
| Local Template
*** Keywords ***
| Local Template
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
-| | And Initialize IPv6 forwarding with scaling in circular topology
-| | ... | ${rts_per_flow}
+| | And Initialize IPv6 Forwarding | count=${rts_per_flow} | pfs=${nic_pfs}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
-# Copyright (c) 2023 Cisco and/or its affiliates.
+# Copyright (c) 2024 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing.
| ... |
| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 routing \
| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing.
| ... |
| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 routing \
-| ... | 2x1M static IPv6 /64 route entries. DUT1 is tested with ${nic_name}.
+| ... | 2x1M static IPv6 /128 route entries. DUT1 is tested with ${nic_name}.
| ... |
| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
| ... |
| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
| ${overhead}= | ${0}
| ${rts_per_flow}= | ${1000000}
# Traffic profile:
| ${overhead}= | ${0}
| ${rts_per_flow}= | ${1000000}
# Traffic profile:
-| ${traffic_profile}= | trex-stl-ethip6-ip6dst${rts_per_flow}
+| ${traffic_profile}= | trex-stl-ethip6-ip6dst${rts_per_flow}-${nic_pfs}p
*** Keywords ***
| Local Template
*** Keywords ***
| Local Template
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
-| | And Initialize IPv6 forwarding with scaling in circular topology
-| | ... | ${rts_per_flow}
+| | And Initialize IPv6 Forwarding | count=${rts_per_flow} | pfs=${nic_pfs}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
-# Copyright (c) 2023 Cisco and/or its affiliates.
+# Copyright (c) 2024 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing.
| ... |
| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 routing \
| ... | - **[Enc] Packet Encapsulations:** Eth-IPv6 for IPv6 routing.
| ... |
| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv6 routing \
-| ... | 2x1M static IPv6 /64 route entries. DUT1 is tested with ${nic_name}.
+| ... | 2x1M static IPv6 /128 route entries. DUT1 is tested with ${nic_name}.
| ... |
| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
| ... |
| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
| ${overhead}= | ${0}
| ${rts_per_flow}= | ${1000000}
# Traffic profile:
| ${overhead}= | ${0}
| ${rts_per_flow}= | ${1000000}
# Traffic profile:
-| ${traffic_profile}= | trex-stl-ethip6-ip6dst${rts_per_flow}-rnd
+| ${traffic_profile}= | trex-stl-ethip6-ip6dst-rnd${rts_per_flow}-${nic_pfs}p
*** Keywords ***
| Local Template
*** Keywords ***
| Local Template
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
-| | And Initialize IPv6 forwarding with scaling in circular topology
-| | ... | ${rts_per_flow}
+| | And Initialize IPv6 Forwarding | count=${rts_per_flow} | pfs=${nic_pfs}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***