| Library | resources.libraries.python.LispSetup.LispLocalEid
| Library | resources.libraries.python.LispSetup.LispAdjacency
| Library | resources.libraries.python.LispSetup.LispRemoteMapping
+| Library | resources.libraries.python.IPv4Util.IPv4Util
*** Keywords ***
| Set up Lisp topology
| | ... | ${dut2_static_adjacency['deid']}
| | ... | ${dut2_static_adjacency['prefix']}
| | ... | ${dut2_static_adjacency['seid']}
-| | ... | ${dut2_static_adjacency['prefix']}
\ No newline at end of file
+| | ... | ${dut2_static_adjacency['prefix']}
+
+| Change Lisp Configuration
+| | [Documentation] | Change configuration of the Lisp protocol.
+| | ...
+| | ... | *Arguments:*
+| | ... | - dut1_node - DUT1 node. Type: dictionary
+| | ... | - dut2_node - DUT2 node. Type: dictionary
+| | ... | - dut1_to_dut2 - DUT1 towards DUT2 interface name. Type: string
+| | ... | - dut2_to_dut1 - DUT2 towards DUT1 interface name. Type: string
+| | ... | - dut1_to_dut2_mac - DUT1 towards DUT2 interface mac address.
+ Type: string
+| | ... | - dut2_to_dut1_mac - DUT2 towards DUT1 interface mac address.
+ Type: string
+| | ... | - new_dut1_ip - New DUT1 towards DUT2 interface IP address.
+ Type: string
+| | ... | - new_dut2_ip - New DUT2 towards DUT1 interface IP address.
+ Type: string
+| | ... | - prefix - Prefix of the DUT nodes. Type: integer
+| | ... | - old_dut1_static_adjacency - Old DUT1 static adjacency.
+| | ... | Type: dictionary
+| | ... | - new_dut1_static_adjacency - New DUT1 static adjacency.
+| | ... | Type: dictionary
+| | ...
+| | ... | *Return:*
+| | ... | - No value returned
+| | ...
+| | ... | *Example:*
+| | ... | \| Change Lisp Configuration \| ${dut1_node} \| ${dut2_node} \
+| | ... | \| ${dut1_to_dut2} \| ${dut2_to_dut1} | "08:00:27:20:e0:0d" \
+| | ... | \| "08:00:27:b1:94:b1" \| "6.3.0.1" \| "6.3.0.20" \| "24" \
+| | ... | \| ${old_dut1_static_adjacency} \| ${new_dut1_static_adjacency} \|
+| | ...
+| | [Arguments] | ${dut1_node} | ${dut2_node} | ${dut1_to_dut2}
+| | ... | ${dut2_to_dut1} | ${dut1_to_dut2_mac} | ${dut2_to_dut1_mac}
+| | ... | ${new_dut1_ip} | ${new_dut2_ip} | ${prefix}
+| | ... | ${old_dut1_static_adjacency} | ${new_dut1_static_adjacency}
+| | Flush IPv4 Addresses "${dut2_to_dut1}" "${dut2_node}"
+| | Vpp Del Lisp Remote Mapping | ${dut1_node}
+| | ... | ${old_dut1_static_adjacency['vni']}
+| | ... | ${old_dut1_static_adjacency['deid']}
+| | ... | ${old_dut1_static_adjacency['prefix']}
+| | ... | ${old_dut1_static_adjacency['seid']}
+| | ... | ${old_dut1_static_adjacency['prefix']}
+| | ... | ${old_dut1_static_adjacency['rloc']}
+| | Vpp Del Lisp Adjacency | ${dut1_node}
+| | ... | ${old_dut1_static_adjacency['vni']}
+| | ... | ${old_dut1_static_adjacency['deid']}
+| | ... | ${old_dut1_static_adjacency['prefix']}
+| | ... | ${old_dut1_static_adjacency['seid']}
+| | ... | ${old_dut1_static_adjacency['prefix']}
+| | Set Interface Address | ${dut2_node} | ${dut2_to_dut1}
+| | ... | ${new_dut2_ip} | ${prefix}
+| | Add Arp On Dut | ${dut1_node} | ${dut1_to_dut2} | ${new_dut2_ip}
+| | ... | ${dut2_to_dut1_mac}
+| | Add Arp On Dut | ${dut2_node} | ${dut2_to_dut1} | ${new_dut1_ip}
+| | ... | ${dut1_to_dut2_mac}
+| | Vpp Add Lisp Remote Mapping | ${dut1_node}
+| | ... | ${new_dut1_static_adjacency['vni']}
+| | ... | ${new_dut1_static_adjacency['deid']}
+| | ... | ${new_dut1_static_adjacency['prefix']}
+| | ... | ${new_dut1_static_adjacency['seid']}
+| | ... | ${new_dut1_static_adjacency['prefix']}
+| | ... | ${new_dut1_static_adjacency['rloc']}
+| | Vpp Add Lisp Adjacency | ${dut1_node}
+| | ... | ${new_dut1_static_adjacency['vni']}
+| | ... | ${new_dut1_static_adjacency['deid']}
+| | ... | ${new_dut1_static_adjacency['prefix']}
+| | ... | ${new_dut1_static_adjacency['seid']}
+| | ... | ${new_dut1_static_adjacency['prefix']}
| Resource | resources/libraries/robot/l2_traffic.robot
| Library | resources.libraries.python.IPUtil
| Library | resources.libraries.python.Trace
-| Library | resources.libraries.python.IPv4Util.IPv4Util
# import additional Lisp settings from resource file
| Variables | resources/test_data/lisp/static_adjacency/lisp_static_adjacency.py
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | 3_NODE_DOUBLE_LINK_TOPO
*** Test Cases ***
| TC01: DUT1 and DUT2 route IPv4 bidirectionally over LISPoIPv4 tunnel
| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-LISP-IPv4-ICMPv4 on \
-| | ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On DUT1 and DUT2
-| | ... | configure IPv4 LISP static adjacencies. [Ver] Make TG send
-| | ... | ICMPv4 Echo Req between its interfaces across both DUTs and LISP
-| | ... | tunnel between them; verify IPv4 headers on received packets are
-| | ... | correct. [Ref] RFC6830.
+| | ... | [Top] TG-DUT1-DUT2-TG. \
+| | ... | [Enc] Eth-IPv4-LISP-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on
+| | ... | TG-DUTn.
+| | ... | [Cfg] On DUT1 and DUT2 configure IPv4 LISP static adjacencies.
+| | ... | [Ver] Make TG send ICMPv4 Echo Req between its interfaces across both
+| | ... | DUTs and LISP tunnel between them; verify IPv4 headers on received
+| | ... | packets are correct.
+| | ... | [Cfg2] Reconf LISP.
+| | ... | [Ver2] Verify packets are received again via LISP tunnel.
+| | ... | [Ref] RFC6830.
| | [Tags] | EXPECTED_FAILING
| | Given Path for 3-node testing is set
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
+| | When Change Lisp Configuration | ${dut1_node} | ${dut2_node}
+| | ... | ${dut1_to_dut2} | ${dut2_to_dut1} | ${dut1_to_dut2_mac}
+| | ... | ${dut2_to_dut1_mac} | ${dut1_to_dut2_ip4}
+| | ... | ${dut2_to_dut1_ip4_reconf} | ${prefix4}
+| | ... | ${dut1_to_dut2_ip4_static_adjacency}
+| | ... | ${dut1_to_dut2_ip4_static_adjacency_reconf}
+| | Then Send Packet And Check Headers
+| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
+| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
+| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
+| | And Send Packet And Check Headers
+| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
+| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
+| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
| TC02: DUT1 and DUT2 route IPv6 bidirectionally over LISPoIPv6 tunnel
| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv6-LISP-IPv6-ICMPv6 on \
-| | ... | DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn. [Cfg] On DUT1 and DUT2
-| | ... | configure IPv6 LISP static adjacencies. [Ver] Make TG send
-| | ... | ICMPv6 Echo Req between its interfaces across both DUTs and LISP
-| | ... | tunnel between them; verify IPv4 headers on received packets are
-| | ... | correct. [Ref] RFC6830.
+| | ... | [Top] TG-DUT1-DUT2-TG. \
+| | ... | [Enc] Eth-IPv6-LISP-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on
+| | ... | TG-DUTn.
+| | ... | [Cfg] On DUT1 and DUT2 configure IPv6 LISP static adjacencies.
+| | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces across both
+| | ... | DUTs and LISP tunnel between them; verify IPv4 headers on received
+| | ... | packets are correct.
+| | ... | [Cfg2] Reconf LISP.
+| | ... | [Ver2] Verify packets are received again via LISP tunnel.
+| | ... | [Ref] RFC6830.
| | [Tags] | EXPECTED_FAILING
| | Given Path for 3-node testing is set
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6}
| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
+| | When Change Lisp Configuration | ${dut1_node} | ${dut2_node}
+| | ... | ${dut1_to_dut2} | ${dut2_to_dut1} | ${dut1_to_dut2_mac}
+| | ... | ${dut2_to_dut1_mac} | ${dut1_to_dut2_ip6}
+| | ... | ${dut2_to_dut1_ip6_reconf} | ${prefix6}
+| | ... | ${dut1_to_dut2_ip6_static_adjacency}
+| | ... | ${dut1_to_dut2_ip6_static_adjacency_reconf}
+| | Then Send Packet And Check Headers
+| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6}
+| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
+| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
+| | And Send Packet And Check Headers
+| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6}
+| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
+| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
| TC03: DUT1 and DUT2 route IPv4 bidirectionally over LISPoIPv6 tunnel
| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv6-LISP-IPv4-ICMPv4 on \
-| | ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On DUT1 and DUT2
-| | ... | configure IPv6 LISP static adjacencies. [Ver] Make TG send
-| | ... | ICMPv4 Echo Req between its interfaces across both DUTs and LISP
-| | ... | tunnel between them; verify IPv4 headers on received packets are
-| | ... | correct. [Ref] RFC6830.
+| | ... | [Top] TG-DUT1-DUT2-TG. \
+| | ... | [Enc] Eth-IPv6-LISP-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on
+| | ... | TG-DUTn.
+| | ... | [Cfg] On DUT1 and DUT2 configure IPv6 LISP static adjacencies.
+| | ... | [Ver] Make TG send ICMPv4 Echo Req between its interfaces across both
+| | ... | DUTs and LISP tunnel between them; verify IPv4 headers on received
+| | ... | packets are correct.
+| | ... | [Cfg2] Reconf LISP.
+| | ... | [Ver2] Verify packets are received again via LISP tunnel.
+| | ... | [Ref] RFC6830.
| | [Tags] | EXPECTED_FAILING
| | Given Path for 3-node testing is set
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | ... | ${tg_node} | ${tg2_ip4o6} | ${tg1_ip4o6}
| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
+| | When Change Lisp Configuration | ${dut1_node} | ${dut2_node}
+| | ... | ${dut1_to_dut2} | ${dut2_to_dut1} | ${dut1_to_dut2_mac}
+| | ... | ${dut2_to_dut1_mac} | ${dut1_to_dut2_ip4o6}
+| | ... | ${dut2_to_dut1_ip4o6_reconf} | ${dut_prefix4o6}
+| | ... | ${dut1_ip4o6_static_adjacency}
+| | ... | ${dut1_ip4o6_static_adjacency_reconf}
+| | Then Send Packet And Check Headers
+| | ... | ${tg_node} | ${tg1_ip4o6} | ${tg2_ip4o6}
+| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
+| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
+| | And Send Packet And Check Headers
+| | ... | ${tg_node} | ${tg2_ip4o6} | ${tg1_ip4o6}
+| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
+| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
| TC04: DUT1 and DUT2 route IPv6 bidirectionally over LISPoIPv4 tunnel
| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-LISP-IPv6-ICMPv6 on \
-| | ... | DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn. [Cfg] On DUT1 and DUT2
-| | ... | configure IPv4 LISP static adjacencies. [Ver] Make TG send
-| | ... | ICMPv6 Echo Req between its interfaces across both DUTs and LISP
-| | ... | tunnel between them; verify IPv4 headers on received packets are
-| | ... | correct. [Ref] RFC6830.
+| | ... | [Top] TG-DUT1-DUT2-TG. \
+| | ... | [Enc] Eth-IPv4-LISP-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on
+| | ... | TG-DUTn.
+| | ... | [Cfg] On DUT1 and DUT2 configure IPv4 LISP static adjacencies.
+| | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces across both
+| | ... | DUTs and LISP tunnel between them; verify IPv4 headers on received
+| | ... | packets are correct.
+| | ... | [Cfg2] Reconf LISP.
+| | ... | [Ver2] Verify packets are received again via LISP tunnel.
+| | ... | [Ref] RFC6830.
| | [Tags] | EXPECTED_FAILING
| | Given Path for 3-node testing is set
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | ... | ${tg_node} | ${tg2_ip6o4} | ${tg1_ip6o4}
| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
+| | When Change Lisp Configuration | ${dut1_node} | ${dut2_node}
+| | ... | ${dut1_to_dut2} | ${dut2_to_dut1} | ${dut1_to_dut2_mac}
+| | ... | ${dut2_to_dut1_mac} | ${dut1_to_dut2_ip6o4}
+| | ... | ${dut2_to_dut1_ip6o4_reconf} | ${dut_prefix6o4}
+| | ... | ${dut1_ip6o4_static_adjacency}
+| | ... | ${dut1_ip6o4_static_adjacency_reconf}
+| | Then Send Packet And Check Headers
+| | ... | ${tg_node} | ${tg1_ip6o4} | ${tg2_ip6o4}
+| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
+| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
+| | And Send Packet And Check Headers
+| | ... | ${tg_node} | ${tg2_ip6o4} | ${tg1_ip6o4}
+| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
+| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
| TC05: DUT1 and DUT2 route IPv4 over LISPoIPv4 tunnel after disable-enable
| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-LISP-IPv4-ICMPv4 on \
-| | ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg1] On DUT1 and DUT2
-| | ... | configure IPv4 LISP static adjacencies. [Ver1] Make TG send
-| | ... | ICMPv4 Echo Req between its interfaces across both DUTs and LISP
-| | ... | tunnel between them; verify IPv4 headers on received packets are
-| | ... | correct. [Cfg2] Disable LISP. [Ver2] verify packets are not
-| | ... | received via LISP tunnel. [Cfg3] Re-enable LISP. [Ver3] verify
-| | ... | packets are received again via LISP tunnel. [Ref] RFC6830.
+| | ... | [Top] TG-DUT1-DUT2-TG. \
+| | ... | [Enc] Eth-IPv4-LISP-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on
+| | ... | TG-DUTn.
+| | ... | [Cfg1] On DUT1 and DUT2 configure IPv4 LISP static adjacencies.
+| | ... | [Ver1] Make TG send ICMPv4 Echo Req between its interfaces across
+| | ... | both DUTs and LISP tunnel between them; verify IPv4 headers on
+| | ... | received packets are correct.
+| | ... | [Cfg2] Disable LISP.
+| | ... | [Ver2] Verify packets are not received via LISP tunnel.
+| | ... | [Cfg3] Re-enable LISP.
+| | ... | [Ver3] Verify packets are received again via LISP tunnel.
+| | ... | [Ref] RFC6830.
| | [Tags] | EXPECTED_FAILING
| | Given Path for 3-node testing is set
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}