add defect to v2.10

Signed-off-by: Hanoh Haim <[email protected]>

diff --git a/release_notes.asciidoc b/release_notes.asciidoc
index 7cd707f..b37e467 100755 (executable)
--- a/release_notes.asciidoc
+++ b/release_notes.asciidoc
@@ -41,6 +41,7 @@ See link:trex_manual.html#_configuration_yaml_parameter_of_cfg_option[here] and
 
 * link:https://trex-tgn.cisco.com/youtrack/issue/trex-253[trex-253]
 * link:https://trex-tgn.cisco.com/youtrack/issue/trex-212[trex-212]
+* link:https://trex-tgn.cisco.com/youtrack/issue/trex-251[trex-251]
 
 == Release 2.09 ==
 

diff --git a/trex_config.asciidoc b/trex_config.asciidoc
index 5fc5a0f..742b996 100755 (executable)
--- a/trex_config.asciidoc
+++ b/trex_config.asciidoc
@@ -135,17 +135,14 @@ Full description of config file parameters can be found in the manual.
 ----
  - port_limit      : 2
     port_info       :
-    - default_gw      : 11.11.11.1 <1>
-      ip              : 11.11.11.2 <2>
-    - default_gw      : 12.12.12.1 <3>
-      ip              : 12.12.12.2 <4>
+    - default_gw      : 11.11.11.1 #<1>
+      ip              : 11.11.11.2 #<2>
+    - default_gw      : 12.12.12.1 #<3>
+      ip              : 12.12.12.2 #<4>
 ----
-
-<1>  TRex port 0 config- should be router's TenG 0/0/0 IP.
-TRex will try to resolve this address by sending ARP request.
+<1>  TRex port 0 config- should be router's TenG 0/0/0 IP. TRex will try to resolve this address by sending ARP request.
 <2>  Next hop of router's TenG 0/0/0. TRex will send gratuitous ARP for this address.
-<3>  TRex port 1 config- should be router's TenG 0/0/1 IP.
-TRex will try to resolve this address by sending ARP request.
+<3>  TRex port 1 config- should be router's TenG 0/0/1 IP. TRex will try to resolve this address by sending ARP request.
 <4>  Next hop of router's TenG 0/0/0. TRex will send gratuitous ARP for this address.
 
 == TRex emulated server/client IPs definition in traffic config file
@@ -253,10 +250,10 @@ file must contain the following (instead of the ``ip'' and ``default_gw'').
 ----
  - port_limit      : 2
     port_info       :  # set eh mac addr
-    - dest_mac        :   [0x0,0x0,0x0,0x1,0x0,0x0] <1>
-      src_mac         :   [0x0,0x0,0x0,0x2,0x0,0x0] <2>
-    - dest_mac        :   [0x0,0x0,0x0,0x3,0x0,0x0] <3>
-      src_mac         :   [0x0,0x0,0x0,0x4,0x0,0x0] <4>
+    - dest_mac        :   [0x0,0x0,0x0,0x1,0x0,0x0] 
+      src_mac         :   [0x0,0x0,0x0,0x2,0x0,0x0] 
+    - dest_mac        :   [0x0,0x0,0x0,0x3,0x0,0x0] 
+      src_mac         :   [0x0,0x0,0x0,0x4,0x0,0x0] 
 ----
 =============================================================================
 .  Should be Router's TenG 0/0/0 mac-address.
@@ -269,8 +266,8 @@ file must contain the following (instead of the ``ip'' and ``default_gw'').
 
 [source,python]
 ----
- arp 12.12.12.2 0000.0002.0000 ARPA  <1>
- arp 11.11.11.2 0000.0004.0000 ARPA  <2>
+ arp 12.12.12.2 0000.0002.0000 ARPA  #<1>
+ arp 11.11.11.2 0000.0004.0000 ARPA  #<2>
 ----
 <1> TRex port 0 source mac-address.
 <2> TRex port 1 source mac-address.
@@ -299,9 +296,9 @@ interface TenGigabitEthernet1/0/0
  ip address 11.11.11.1 255.255.255.0
  ip policy route-map p1_to_p2
  load-interval 30                        
- ipv6 enable                            #<1>
- ipv6 address 2001:DB8:1111:2222::1/64  #<2>
- ipv6 policy route-map ipv6_p1_to_p2    #<3>
+ ipv6 enable                                                  #<1>
+ ipv6 address 2001:DB8:1111:2222::1/64                        #<2>
+ ipv6 policy route-map ipv6_p1_to_p2                          #<3>
 !