DPDK_MACHINE ?= default
DPDK_MLX_IBV_LINK ?= static
-dpdk_version ?= 21.08
+dpdk_version ?= 21.11
dpdk_base_url ?= http://fast.dpdk.org/rel
dpdk_tarball := dpdk-$(dpdk_version).tar.xz
+dpdk_tarball_md5sum_21.11 := 58660bbbe9e95abce86e47692b196555
dpdk_tarball_md5sum_21.08 := de33433a1806280996a0ecbe66e3642f
dpdk_tarball_md5sum_21.05 := a78bba290b11d9717d1272cc6bfaf7c3
dpdk_tarball_md5sum := $(dpdk_tarball_md5sum_$(dpdk_version))
#include <rte_cryptodev.h>
#include <rte_crypto_sym.h>
#include <rte_crypto.h>
-#include <rte_cryptodev_pmd.h>
#include <rte_config.h>
#include "cryptodev.h"
struct rte_crypto_sym_xform xforms_enc[2] = { { 0 } };
struct rte_crypto_sym_xform xforms_dec[2] = { { 0 } };
struct rte_cryptodev_sym_session *sessions[CRYPTODEV_N_OP_TYPES] = { 0 };
+ struct rte_cryptodev_info dev_info;
u32 numa_node = vm->numa_node;
clib_error_t *error;
int ret = 0;
vec_foreach (dev_inst, cmt->cryptodev_inst)
{
u32 dev_id = dev_inst->dev_id;
- struct rte_cryptodev *cdev = rte_cryptodev_pmd_get_dev (dev_id);
- u32 driver_id = cdev->driver_id;
+ rte_cryptodev_info_get (dev_id, &dev_info);
+ u32 driver_id = dev_info.driver_id;
/* if the session is already configured for the driver type, avoid
configuring it again to increase the session data's refcnt */
cryptodev_engine_thread_t *cet;
cryptodev_numa_data_t *numa_data;
cryptodev_inst_t *dev_inst;
+ struct rte_cryptodev_info dev_info;
u32 node;
u8 nodes = 0;
u32 skip_master = vlib_num_workers () > 0;
vec_foreach (dev_inst, cmt->cryptodev_inst)
{
u32 dev_id = dev_inst->dev_id;
- struct rte_cryptodev *cdev = rte_cryptodev_pmd_get_dev (dev_id);
- u32 driver_id = cdev->driver_id;
+ rte_cryptodev_info_get (dev_id, &dev_info);
+ u32 driver_id = dev_info.driver_id;
is_drv_unique (driver_id, &unique_drivers);
u32 sess_sz =
#include <rte_cryptodev.h>
#include <rte_crypto_sym.h>
#include <rte_crypto.h>
-#include <rte_cryptodev_pmd.h>
#include <rte_ring_peek_zc.h>
#include <rte_config.h>
#include <rte_cryptodev.h>
#include <rte_crypto_sym.h>
#include <rte_crypto.h>
-#include <rte_cryptodev_pmd.h>
+#include <rte_malloc.h>
#include <rte_config.h>
#include "cryptodev.h"
if (xd->conf.disable_multi_seg == 0)
{
txo |= DEV_TX_OFFLOAD_MULTI_SEGS;
- rxo |= DEV_RX_OFFLOAD_JUMBO_FRAME | DEV_RX_OFFLOAD_SCATTER;
+ rxo |= DEV_RX_OFFLOAD_SCATTER;
+#if RTE_VERSION < RTE_VERSION_NUM(21, 11, 0, 0)
+ rxo |= DEV_RX_OFFLOAD_JUMBO_FRAME;
+#endif
}
if (xd->conf.enable_lro)
}
}
+#if RTE_VERSION < RTE_VERSION_NUM(21, 11, 0, 0)
if (rxo & DEV_RX_OFFLOAD_JUMBO_FRAME)
conf.rxmode.max_rx_pkt_len =
clib_min (ETHERNET_MAX_PACKET_BYTES, dev_info.max_rx_pktlen);
-
+#else
+ dpdk_log_debug ("[%u] min_mtu: %u, max_mtu: %u, min_rx_bufsize: %u, "
+ "max_rx_pktlen: %u, max_lro_pkt_size: %u",
+ xd->port_id, dev_info.min_mtu, dev_info.max_mtu,
+ dev_info.min_rx_bufsize, dev_info.max_rx_pktlen,
+ dev_info.max_lro_pkt_size);
+
+ mtu = xd->conf.disable_multi_seg ? 2000 : ETHERNET_MAX_PACKET_BYTES;
+ conf.rxmode.mtu = clib_min (mtu, dev_info.max_rx_pktlen);
+#endif
+
+retry:
rv = rte_eth_dev_configure (xd->port_id, xd->conf.n_rx_queues,
xd->conf.n_tx_queues, &conf);
+ if (rv < 0 && conf.intr_conf.rxq)
+ {
+ conf.intr_conf.rxq = 0;
+ goto retry;
+ }
+
if (rv < 0)
{
dpdk_device_error (xd, "rte_eth_dev_configure", rv);
xd->port_type = VNET_DPDK_PORT_TYPE_ETH_1G;
xd->conf.n_rx_desc = DPDK_NB_RX_DESC_VIRTIO;
xd->conf.n_tx_desc = DPDK_NB_TX_DESC_VIRTIO;
- /*
- * Enable use of RX interrupts if supported.
- *
- * There is no device flag or capability for this, so
- * use the same check that the virtio driver does.
- */
- if (pci_dev && rte_intr_cap_multiple (&pci_dev->intr_handle))
- xd->conf.enable_rxq_int = 1;
+ xd->conf.enable_rxq_int = 1;
break;
/* vmxnet3 */