10.30.51.93: #s93-t39-sut1 - snowridge
10.30.51.94: #s94-t39-sut2 - snowridge
10.32.8.24: #s60-t210-sut1 - epyc
- vpp_device:
- hosts:
- 10.30.51.30: #s30-t15-sut1 - sapphirerapids
- 10.30.51.31: #s31-t16-sut1 - sapphirerapids
- 10.30.51.70: #s70-t13-sut1 - altra
- 10.30.51.71: #s71-t14-sut1 - altra
nomad:
hosts:
10.30.51.21: #s21-nomad - sapphirerapids
10.30.51.26: #s26-nomad - skylake
10.30.51.27: #s27-nomad - skylake
10.30.51.28: #s28-nomad - skylake
+ 10.30.51.30: #s30-nomad - sapphirerapids
+ 10.30.51.31: #s31-nomad - sapphirerapids
10.30.51.50: #s50-nomad - skylake
10.30.51.51: #s51-nomad - skylake
+ 10.30.51.70: #s70-nomad - altra
+ 10.30.51.71: #s71-nomad - altra
10.30.51.91: #s58-nomad - neoverse n1
10.30.51.92: #s59-nomad - neoverse n1
dev:
---
-# file: roles/calibration/defaults/main.yaml
+# file: defaults/main.yaml
# Packages to install.
packages: "{{ packages_base + packages_by_distro[ansible_distribution|lower][ansible_distribution_release] + packages_by_arch[ansible_machine] }}"
---
-# file: roles/calibration/tasks/aarch64.yaml
+# file: tasks/aarch64.yaml
+++ /dev/null
-#!/usr/bin/env bash
-
-# Copyright (c) 2023 PANTHEON.tech and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# Add QLogic Corp. FastLinQ QL41000 Series 10/25/40/50GbE Controller to
-# blacklist.
-PCI_BLACKLIST=($(lspci -Dmmd ':8070:0200' | cut -f1 -d' '))
-# Add I350 Gigabit Network Connection 1521 to blacklist.
-PCI_BLACKLIST+=($(lspci -Dmmd ':1521:0200' | cut -f1 -d' '))
-# Add MT27800 Family [ConnectX-5] 1017 to blacklist.
-PCI_BLACKLIST+=($(lspci -Dmmd ':1017:0200' | cut -f1 -d' '))
-
-# Add Intel Corporation Ethernet Controller XL710 for 40GbE QSFP+ to whitelist.
-PCI_WHITELIST=($(lspci -Dmmd ':1583:0200' | cut -f1 -d' '))
-# Add MT2892 Family [ConnectX-6 Dx] 101d to whitelist.
-PCI_WHITELIST+=($(lspci -Dmmd ':101d:0200' | cut -f1 -d' '))
-
-# See http://pci-ids.ucw.cz/v2.2/pci.ids for more info.
-
-declare -A PF_INDICES
-# Intel NICs
-PF_INDICES["0000:01:00.0"]=0
-PF_INDICES["0000:01:00.1"]=1
-PF_INDICES["0003:02:00.0"]=0
-PF_INDICES["0003:02:00.1"]=1
-# Mellanox CX6
-PF_INDICES["0001:01:00.0"]=2
-PF_INDICES["0001:01:00.1"]=2
\ No newline at end of file
+++ /dev/null
-#!/usr/bin/env bash
-
-# Copyright (c) 2021 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# Add Intel Corporation Ethernet Controller 10G X550T to blacklist.
-PCI_BLACKLIST=($(lspci -Dmmd ':1563:0200' | cut -f1 -d' '))
-
-# Add Intel Corporation Ethernet Controller X710 for 10GbE SFP+ to whitelist.
-PCI_WHITELIST=($(lspci -Dmmd ':1572:0200' | cut -f1 -d' '))
-# Add Intel Corporation Ethernet Controller E810-C for 100GbE QSFP to whitelist.
-PCI_WHITELIST+=($(lspci -Dmmd ':1592:0200' | cut -f1 -d' '))
-
-# See http://pci-ids.ucw.cz/v2.2/pci.ids for more info.
-
-declare -A PF_INDICES
-# Intel NICs
-PF_INDICES["0000:18:00.0"]=0
-PF_INDICES["0000:18:00.1"]=1
-PF_INDICES["0000:18:00.2"]=2
-PF_INDICES["0000:18:00.3"]=3
-PF_INDICES["0000:86:00.0"]=4
-PF_INDICES["0000:3b:00.0"]=0
-PF_INDICES["0000:3b:00.1"]=1
-PF_INDICES["0000:3b:00.2"]=2
-PF_INDICES["0000:3b:00.3"]=3
-PF_INDICES["0000:af:00.0"]=4
+++ /dev/null
-#!/usr/bin/env bash
-
-# Copyright (c) 2024 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# Add Intel Corporation Ethernet Controller 10G X550T to blacklist.
-PCI_BLACKLIST=($(lspci -Dmmd ':1563:0200' | cut -f1 -d' '))
-
-# Add Intel Corporation Ethernet Controller X710 for 10GbE SFP+ to whitelist.
-PCI_WHITELIST=($(lspci -Dmmd ':1572:0200' | cut -f1 -d' '))
-# Add Intel Corporation Ethernet Controller E810-C for 100GbE QSFP to whitelist.
-PCI_WHITELIST+=($(lspci -Dmmd ':1592:0200' | cut -f1 -d' '))
-
-# See http://pci-ids.ucw.cz/v2.2/pci.ids for more info.
-
-declare -A PF_INDICES
-# Intel NICs
-PF_INDICES["0000:2a:00.0"]=0
-PF_INDICES["0000:2a:00.1"]=1
-PF_INDICES["0000:2a:00.2"]=2
-PF_INDICES["0000:2a:00.3"]=3
-PF_INDICES["0000:bd:00.0"]=4
-PF_INDICES["0000:3d:00.0"]=0
-PF_INDICES["0000:3d:00.1"]=1
-PF_INDICES["0000:3d:00.2"]=2
-PF_INDICES["0000:3d:00.3"]=3
-PF_INDICES["0000:e1:00.0"]=4
-
+++ /dev/null
-#!/usr/bin/env bash
-
-# Copyright (c) 2021 PANTHEON.tech and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# Add QLogic Corp. FastLinQ QL41000 Series 10/25/40/50GbE Controller to
-# blacklist.
-PCI_BLACKLIST=($(lspci -Dmmd ':8070:0200' | cut -f1 -d' '))
-# Add I350 Gigabit Network Connection 1521 to blacklist.
-PCI_BLACKLIST+=($(lspci -Dmmd ':1521:0200' | cut -f1 -d' '))
-# Add MT27800 Family [ConnectX-5] 1017 to blacklist.
-PCI_BLACKLIST+=($(lspci -Dmmd ':1017:0200' | cut -f1 -d' '))
-
-# Add Intel Corporation Ethernet Controller XL710 for 40GbE QSFP+ to whitelist.
-PCI_WHITELIST=($(lspci -Dmmd ':1583:0200' | cut -f1 -d' '))
-
-# See http://pci-ids.ucw.cz/v2.2/pci.ids for more info.
-
-declare -A PF_INDICES
-# Intel NICs
-PF_INDICES["0000:05:00.0"]=0
-PF_INDICES["0000:05:00.1"]=1
-PF_INDICES["0000:91:00.0"]=0
-PF_INDICES["0000:91:00.1"]=1
+++ /dev/null
-[Unit]
-Description=CSIT Initialize SR-IOV VFs
-After=network.target
-
-[Service]
-Type=oneshot
-RemainAfterExit=True
-ExecStart=/usr/local/bin/csit-initialize-vfs.sh start
-ExecStop=/usr/local/bin/csit-initialize-vfs.sh stop
-
-[Install]
-WantedBy=default.target
+++ /dev/null
-#!/usr/bin/env bash
-
-# Copyright (c) 2021 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# CSIT SRIOV VF initialization and isolation.
-
-set -euo pipefail
-
-SCRIPT_DIR="$(dirname $(readlink -e "${BASH_SOURCE[0]}"))"
-source "${SCRIPT_DIR}/csit-initialize-vfs-data.sh"
-
-# Initilize whitelisted NICs with maximum number of VFs.
-pci_idx=0
-for pci_addr in ${PCI_WHITELIST[@]}; do
- if ! [[ ${PCI_BLACKLIST[*]} =~ "${pci_addr}" ]]; then
- pci_path="/sys/bus/pci/devices/${pci_addr}"
- # SR-IOV initialization
- case "${1:-start}" in
- "start" )
- if [ $(< "${pci_path}"/sriov_totalvfs) -gt 128 ]
- then
- sriov_totalvfs=128
- else
- sriov_totalvfs=$(< "${pci_path}"/sriov_totalvfs)
- fi
- ;;
- "stop" )
- sriov_totalvfs=0
- ;;
- esac
- echo ${sriov_totalvfs} > "${pci_path}"/sriov_numvfs
- # SR-IOV 802.1Q isolation
- case "${1:-start}" in
- "start" )
- pf=$(basename "${pci_path}"/net/*)
- for vf in $(seq "${sriov_totalvfs}"); do
- # PCI address index in array (pairing siblings).
- if [[ -n ${PF_INDICES[@]} ]]
- then
- vlan_pf_idx=${PF_INDICES[$pci_addr]}
- else
- vlan_pf_idx=$(( pci_idx % (${#PCI_WHITELIST[@]} / 2) ))
- fi
- # 802.1Q base offset.
- vlan_bs_off=1100
- # 802.1Q PF PCI address offset.
- vlan_pf_off=$(( vlan_pf_idx * 100 + vlan_bs_off ))
- # 802.1Q VF PCI address offset.
- vlan_vf_off=$(( vlan_pf_off + vf - 1 ))
- # VLAN string.
- vlan_str="vlan ${vlan_vf_off}"
- # MAC string.
- mac5="$(printf '%x' ${pci_idx})"
- mac6="$(printf '%x' $(( vf - 1 )))"
- mac_str="mac ba:dc:0f:fe:${mac5}:${mac6}"
- # Set 802.1Q VLAN id and MAC address
- ip link set ${pf} vf $(( vf - 1 )) ${mac_str} ${vlan_str}
- ip link set ${pf} vf $(( vf - 1 )) trust on
- ip link set ${pf} vf $(( vf - 1 )) spoof off
- sleep .5
- done
- pci_idx=$(( pci_idx + 1 ))
- ;;
- esac
- fi
-done
+++ /dev/null
----
-# file: handlers/main.yaml
-
-- name: "Start csit-initialize-vfs.service"
- ansible.builtin.systemd:
- enabled: true
- state: "started"
- name: "csit-initialize-vfs.service"
- tags:
- - start-vf-service
-
-- name: "Update GRUB"
- ansible.builtin.command: "update-grub"
- tags:
- - update-grub
-
-- name: "Reboot server"
- ansible.builtin.reboot:
- reboot_timeout: 3600
- tags:
- - reboot-server
+++ /dev/null
----
-# file: tasks/main.yaml
-
-- name: "Load Kernel Modules On Startup (vfio-pci)"
- ansible.builtin.lineinfile:
- path: "/etc/modules"
- state: "present"
- line: "{{ item }}"
- with_items:
- - "vfio-pci"
- tags:
- - load-kernel-modules
-
-- name: "Disable IPv6 Router Advertisement"
- ansible.builtin.sysctl:
- name: "net.ipv6.conf.default.accept_ra"
- value: "0"
- state: "present"
- sysctl_file: "/etc/sysctl.d/90-csit.conf"
- reload: "yes"
- tags:
- - set-sysctl
-
-- name: "Disable IPv6 MLDv1 interval"
- ansible.builtin.sysctl:
- name: "net.ipv6.conf.default.mldv1_unsolicited_report_interval"
- value: "0"
- state: "present"
- sysctl_file: "/etc/sysctl.d/90-csit.conf"
- reload: "yes"
- tags:
- - set-sysctl
-
-- name: "Disable IPv6 MLDv2 interval"
- ansible.builtin.sysctl:
- name: "net.ipv6.conf.default.mldv2_unsolicited_report_interval"
- value: "0"
- state: "present"
- sysctl_file: "/etc/sysctl.d/90-csit.conf"
- reload: "yes"
- tags:
- - set-sysctl
-
-- name: "Disable IPv6 Autoconf"
- ansible.builtin.sysctl:
- name: "net.ipv6.conf.default.autoconf"
- value: "0"
- state: "present"
- sysctl_file: "/etc/sysctl.d/90-csit.conf"
- reload: "yes"
- tags:
- - set-sysctl
-
-- name: "Disable IPv6 MC Forwarding"
- ansible.builtin.sysctl:
- name: "net.ipv6.conf.default.mc_forwarding"
- value: "0"
- state: "present"
- sysctl_file: "/etc/sysctl.d/90-csit.conf"
- reload: "yes"
- tags:
- - set-sysctl
-
-- name: "Disable IPv4 IGMPv2 interval"
- ansible.builtin.sysctl:
- name: "net.ipv4.conf.default.igmpv2_unsolicited_report_interval"
- value: "0"
- state: "present"
- sysctl_file: "/etc/sysctl.d/90-csit.conf"
- reload: "yes"
- tags:
- - set-sysctl
-
-- name: "Disable IPv4 IGMPv3 interval"
- ansible.builtin.sysctl:
- name: "net.ipv4.conf.default.igmpv3_unsolicited_report_interval"
- value: "0"
- state: "present"
- sysctl_file: "/etc/sysctl.d/90-csit.conf"
- reload: "yes"
- tags:
- - set-sysctl
-
-- name: "Copy csit-initialize-vfs.sh"
- ansible.builtin.copy:
- src: "files/csit-initialize-vfs.sh"
- dest: "/usr/local/bin/"
- owner: "root"
- group: "root"
- mode: 0744
- tags:
- - copy-vf-script
-
-- name: "Copy csit-initialize-vfs-data.sh"
- ansible.builtin.copy:
- src: "files/{{ vfs_data_file }}"
- dest: "/usr/local/bin/csit-initialize-vfs-data.sh"
- owner: "root"
- group: "root"
- mode: 0744
- tags: copy-vf-data-script
- when:
- - vfs_data_file is defined
-
-- name: "Copy Default csit-initialize-vfs-data.sh"
- ansible.builtin.copy:
- src: "files/csit-initialize-vfs-default.sh"
- dest: "/usr/local/bin/csit-initialize-vfs-data.sh"
- owner: "root"
- group: "root"
- mode: 0744
- tags: copy-vf-data-script
- when:
- - vfs_data_file is not defined
-
-- name: "Start csit-initialize-vfs.service"
- ansible.builtin.copy:
- src: "files/csit-initialize-vfs.service"
- dest: "/etc/systemd/system/"
- owner: "root"
- group: "root"
- mode: 0644
- notify:
- - "Start csit-initialize-vfs.service"
- tags:
- - start-vf-service
-
-- ansible.builtin.meta: "flush_handlers"
-
-- name: "Set Hugepages In GRUB"
- ansible.builtin.lineinfile:
- path: "/etc/default/grub"
- state: "present"
- regexp: "^GRUB_CMDLINE_LINUX="
- line: "GRUB_CMDLINE_LINUX=\"{% for key, value in grub.items() %}{% if value %}{{key}}={{value}} {% else %}{{key}} {% endif %}{% endfor %}\""
- notify:
- - "Update GRUB"
- tags:
- - set-grub
- sut_azure
- sut_openstasck
-- import_playbook: vpp_device.yaml
- tags:
- - vpp-device
-
- import_playbook: nomad.yaml
tags:
- nomad
+++ /dev/null
----
-# file: vpp_device.yaml
-
-- hosts: vpp_device
- remote_user: localadmin
- become: true
- become_user: root
- gather_facts: false
- pre_tasks:
- - name: Gathering Facts
- gather_facts:
- tags:
- - always
- roles:
- - role: user_add
- tags: user_add
- - role: baremetal
- tags: baremetal
- - role: common
- tags: common
-# - role: kernel
-# tags: kernel
- - role: intel
- tags: intel
- - role: mellanox
- tags: mellanox
- - role: docker
- tags: docker
- - role: docker_images
- tags: docker_images
- - role: nomad
- tags: nomad
- - role: consul
- tags: consul
- - role: prometheus_exporter
- tags: prometheus_exporter
- - role: jenkins_job_health_exporter
- tags: jenkins_job_health_exporter
- - role: vpp_device
- tags: vpp_device
- - role: kernel_vm
- tags: kernel_vm
- - role: cleanup
- tags: cleanup
&& mkdir -p /var/lib/tftpboot/casper/ubuntu-noble-amd64/ \
&& mkdir -p /var/lib/tftpboot/casper/ubuntu-noble-arm64/
-ENV ISO_NOBLE_AMD64=https://releases.ubuntu.com/releases/noble/ubuntu-24.04-live-server-amd64.iso
-ENV ISO_NOBLE_ARM64=https://cdimage.ubuntu.com/releases/noble/release/ubuntu-24.04-live-server-arm64.iso
+ENV ISO_NOBLE_AMD64=https://releases.ubuntu.com/releases/noble/ubuntu-24.04.1-live-server-amd64.iso
+ENV ISO_NOBLE_ARM64=https://cdimage.ubuntu.com/releases/noble/release/ubuntu-24.04.1-live-server-arm64.iso
ENV EFI_NOBLE_AMD64=http://archive.ubuntu.com/ubuntu/dists/jammy/main/uefi/grub2-amd64/current/grubnetx64.efi.signed
ENV EFI_NOBLE_ARM64=http://ports.ubuntu.com/ubuntu-ports/dists/jammy/main/uefi/grub2-arm64/current/grubnetaa64.efi.signed
dhcp-option=yul1_1,option:dns-server,8.8.8.8
# DHCP ranges for yul1_2.
-dhcp-range=yul1_2,10.32.8.18,10.32.8.25,255.255.255.0,infinite
+dhcp-range=yul1_2,10.32.8.24,10.32.8.25,255.255.255.0,infinite
dhcp-option=yul1_2,option:router,10.32.8.1
dhcp-option=yul1_2,option:dns-server,1.1.1.1
dhcp-option=yul1_2,option:dns-server,8.8.8.8
+# DHCP ranges for yul1_1_ipmi.
+dhcp-range=yul1_2,10.30.50.36,10.30.50.36,255.255.255.0,infinite
+dhcp-option=yul1_2,option:router,10.30.50.1
+dhcp-option=yul1_2,option:dns-server,1.1.1.1
+dhcp-option=yul1_2,option:dns-server,8.8.8.8
+
# Hosts DHCP settings yul1_1 subnet.
dhcp-host=7c:c2:55:55:c0:74,10.30.51.21,s21-nomad,infinite # eno1 SPR
dhcp-host=7c:c2:55:55:c0:7a,10.30.51.22,s22-nomad,infinite # eno1 SPR
dhcp-host=3c:ec:ef:d9:de:27,10.30.51.33,s33-t31-sut2,infinite # eno2 ICXD
dhcp-host=3c:ec:ef:d9:dd:77,10.30.51.34,s34-t32-sut1,infinite # eno2 ICXD
dhcp-host=3c:ec:ef:d9:dd:eb,10.30.51.35,s35-t32-sut2,infinite # eno2 ICXD
-dhcp-host=ac:1f:6b:ac:d7:ba,10.30.51.36,s36-t27-sut1,infinite # eno1 GRC
+dhcp-host=6e:a1:6b:60:97:74,10.30.51.36,s36-t27-sut1,infinite # eno1 GRC
dhcp-host=3c:ec:ef:b9:cc:44,10.30.51.37,s37-t27-tg1,infinite # eno1 ICX
dhcp-host=40:8d:5c:e7:b2:6e,10.30.51.38,fdio-marvell-dev,infinite # enP2p1s0v0 ARM-DEV
dhcp-host=ac:1f:6b:8a:8c:76,10.30.51.50,s50-nomad,infinite # eno1 HST
# Hosts DHCP settings yul1_2 subnet.
dhcp-host=3c:ec:ef:43:a3:ba,10.32.8.24,s60-t210-sut1,infinite # eno1np0 ZN2
dhcp-host=3c:ec:ef:46:34:e8,10.32.8.25,s61-t210-tg1,infinite # eno1np0 ZN2
+# Hosts DHCP settings yul1_1_ipmi subnet.
+dhcp-host=3c:6d:66:05:55:d8,10.30.50.36,s36-t27-sut1,infinite # eth1 GRC
--- /dev/null
+menuentry "Install s36-t27-sut1" {
+ linux /casper/ubuntu-noble-arm64/vmlinuz ip=:::::eno1:dhcp url=http://10.30.51.24:8081/ubuntu_noble_arm64/ubuntu-24.04.1-live-server-arm64 autoinstall ds=nocloud-net\;s=http://10.30.51.24:8081/ubuntu_noble_arm64/6e:a1:6b:60:97:74/ ---
+ initrd /casper/ubuntu-noble-arm64/initrd
+}
\ No newline at end of file
RUN apt update \
&& apt install -y wget
-ENV ISO_NOBLE_AMD64=https://releases.ubuntu.com/releases/noble/ubuntu-24.04-live-server-amd64.iso
-ENV ISO_NOBLE_ARM64=https://cdimage.ubuntu.com/releases/noble/release/ubuntu-24.04-live-server-arm64.iso
+ENV ISO_NOBLE_AMD64=https://releases.ubuntu.com/releases/noble/ubuntu-24.04.1-live-server-amd64.iso
+ENV ISO_NOBLE_ARM64=https://cdimage.ubuntu.com/releases/noble/release/ubuntu-24.04.1-live-server-arm64.iso
RUN echo "Preparing ISO Pre-cache" \
- && wget $ISO_NOBLE_AMD64 -O /ubuntu-24.04-live-server-amd64.iso \
- && wget $ISO_NOBLE_ARM64 -O /ubuntu-24.04-live-server-arm64.iso
+ && wget $ISO_NOBLE_AMD64 -O /ubuntu-24.04.1-live-server-amd64.iso \
+ && wget $ISO_NOBLE_ARM64 -O /ubuntu-24.04.1-live-server-arm64.iso
FROM nginx:stable-alpine
RUN mkdir -p $NGINX_NOBLE_AMD64 \
&& mkdir -p $NGINX_NOBLE_ARM64
-COPY --from=ubuntu_noble /ubuntu-24.04-live-server-amd64.iso $NGINX_NOBLE_AMD64/ubuntu-24.04-live-server-amd64.iso
-COPY --from=ubuntu_noble /ubuntu-24.04-live-server-arm64.iso $NGINX_NOBLE_ARM64/ubuntu-24.04-live-server-arm64.iso
+COPY --from=ubuntu_noble /ubuntu-24.04.1-live-server-amd64.iso $NGINX_NOBLE_AMD64/ubuntu-24.04.1-live-server-amd64.iso
+COPY --from=ubuntu_noble /ubuntu-24.04.1-live-server-arm64.iso $NGINX_NOBLE_ARM64/ubuntu-24.04.1-live-server-arm64.iso
COPY html/ /usr/share/nginx/html/
--- /dev/null
+#cloud-config
+autoinstall:
+ version: 1
+ apt:
+ geoip: true
+ preserve_sources_list: false
+ primary:
+ - arches: [amd64, i386]
+ uri: http://ca.archive.ubuntu.com/ubuntu
+ - arches: [default]
+ uri: http://ports.ubuntu.com/ubuntu-ports
+ identity:
+ hostname: s36-t27-sut1
+ password: $6$Y62lhMGJD8YNzmJn$H4DSqjrwFp5WN3tOvIrF.g/G2duOV76zXHAmaA/RU8jfT8H8sDumLQe/Q.EmI5pjPv7dzgI8j9BQPWes7efBK0
+ realname: testuser
+ username: testuser
+ kernel:
+ package: linux-nvidia-64k-hwe-24.04
+ keyboard:
+ layout: us
+ toggle: null
+ variant: ''
+ locale: en_US.UTF-8
+ network:
+ ethernets:
+ eno1:
+ addresses: [ 10.30.51.36/24 ]
+ dhcp4: false
+ gateway4: 10.30.51.1
+ nameservers:
+ addresses: [ 1.1.1.1, 8.8.8.8 ]
+ version: 2
+ packages:
+ - python3
+ refresh-installer:
+ update: no
+ ssh:
+ allow-pw: true
+ authorized-keys: []
+ install-server: true
+ storage:
+ config:
+ - grub_device: false
+ id: disk-nvme0n1
+ path: /dev/nvme0n1
+ ptable: gpt
+ preserve: false
+ type: disk
+ wipe: superblock-recursive
+ - device: disk-nvme0n1
+ grub_device: true
+ id: partition-0
+ flag: boot
+ number: 1
+ preserve: false
+ size: 536870912
+ type: partition
+ wipe: superblock
+ - id: format-0
+ fstype: fat32
+ preserve: false
+ type: format
+ volume: partition-0
+ - device: disk-nvme0n1
+ flag: ''
+ grub_device: false
+ id: partition-1
+ number: 2
+ preserve: false
+ size: -1
+ type: partition
+ wipe: superblock
+ - fstype: ext4
+ id: format-1
+ preserve: false
+ type: format
+ volume: partition-1
+ - device: format-1
+ id: mount-1
+ path: /
+ type: mount
+ - device: format-0
+ id: mount-0
+ path: /boot/efi
+ type: mount
Code Review / csit.git / commitdiff