*Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy L2 Ethernet
Switching (base).*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/container_memif && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/container_memif
- $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/container_memif?h=rls1804>`_.
VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below.
*Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy L2 Ethernet
Switching (base).*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/container_memif && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/container_memif
- $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/container_memif?h=rls1804>`_.
*Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy L2 Ethernet
Switching (base).*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/kubernetes/perf/container_memif && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/kubernetes/perf/container_memif
- $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/kubernetes/perf/container_memif?h=rls1804>`_.
VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below.
*Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy L2 Ethernet
Switching (base).*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/kubernetes/perf/container_memif && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/kubernetes/perf/container_memif
- $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/kubernetes/perf/container_memif?h=rls1804>`_.
*Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy IPv4 Routed-Forwarding.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4 && grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/ip4
- $ grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4?h=rls1804>`_.
VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below.
*Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy IPv4 Routed-Forwarding.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4 && grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/ip4
- $ grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4?h=rls1804>`_.
*Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy IPv4 Overlay Tunnels.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-1t1c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/ip4_tunnels
- $ grep -E "64B-1t1c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4_tunnels?h=rls1804>`_.
VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below.
*Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy IPv4 Overlay Tunnels.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-2t2c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/ip4_tunnels
- $ grep -E "64B-2t2c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4_tunnels?h=rls1804>`_.
*Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy IPv6 Routed-Forwarding.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6 && grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/ip6
- $ grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip6?h=rls1804>`_.
VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below.
*Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy IPv6 Routed-Forwarding.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6 && grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/ip6
- $ grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip6?h=rls1804>`_.
*Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy IPv6 Overlay Tunnels.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/ip6_tunnels
- $ grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip6_tunnels?h=rls1804>`_.
VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below.
*Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy IPv6 Overlay Tunnels.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-2t2c-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/ip6_tunnels
- $ grep -E "78B-2t2c-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" *
-
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip6_tunnels?h=rls1804>`_.
*Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy IPSec HW with IPv4 Routed-Forwarding.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/crypto && grep -E "64B-1t1c-.*ipsec.*-ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/crypto
- $ grep -E "64B-1t1c-.*ipsec.*-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/crypto?h=rls1804>`_.
VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below.
*Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy IPSec HW with IPv4 Routed-Forwarding.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/crypto && grep -E "64B-2t2c-.*ipsec.*-ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/crypto
- $ grep -E "64B-2t2c-.*ipsec.*-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/crypto?h=rls1804>`_.
*Figure 1a. VPP 1thread 1core - packet latency for Phy-to-Phy L2 Ethernet
Switching (base).*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2/ && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/l2?h=rls1804>`_.
.. raw:: html
*Figure 1b. VPP 1thread 1core - packet latency for Phy-to-Phy L2 Ethernet
Switching (feature).*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2 && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl50(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl50-state(ful|less)-flows10k.*)-ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/l2
- $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl50(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl50-state(ful|less)-flows10k.*)-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/l2?h=rls1804>`_.
VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below.
*Figure 2a. VPP 2threads 2cores - packet latency for Phy-to-Phy L2 Ethernet
Switching (base).*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2/ && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/l2?h=rls1804>`_.
.. raw:: html
*Figure 2b. VPP 2threads 2cores - packet latency for Phy-to-Phy L2 Ethernet
Switching (feature).*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2 && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl50(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl50-state(ful|less)-flows10k.*)-ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/l2
- $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl50(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl50-state(ful|less)-flows10k.*)-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/l2?h=rls1804>`_.
*Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy SRv6.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/srv6 && grep -E "78B-1t1c-ethip6.*srv6.*ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/srv6
- $ grep -E "78B-1t1c-ethip6.*srv6.*ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/srv6?h=rls1804>`_.
VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below.
*Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy SRv6.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/srv6 && grep -E "78B-2t2c-ethip6.*srv6.*ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/srv6
- $ grep -E "78B-2t2c-ethip6.*srv6.*ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/srv6?h=rls1804>`_.
*Figure 1a. VPP 1thread 1core - packet latency for Phy-to-VM-to-Phy VM
vhost-user selected TCs (ipv4).*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.
+
.. raw:: html
<iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-vhost-sel2-ndrdisc-lat50.html"></iframe>
*Figure 1b. VPP 1thread 1core - packet latency for Phy-to-VM-to-Phy VM
vhost-user selected TCs (l2).*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-1t1c-.*vhost.*-ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/vm_vhost
- $ grep -E "64B-1t1c-.*vhost.*-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.
VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below.
*Figure 2a. VPP 2threads 2cores - packet latency for Phy-to-VM-to-Phy VM
vhost-user selected TCs (ipv4).*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.
+
.. raw:: html
<iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-vhost-sel2-ndrdisc-lat50.html"></iframe>
*Figure 2b. VPP 2threads 2cores - packet latency for Phy-to-VM-to-Phy VM
vhost-user selected TCs (l2).*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-2t2c-.*vhost.*-ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/vm_vhost
- $ grep -E "64B-2t2c-.*vhost.*-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.
*Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet
Switching (base).*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/container_memif && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/container_memif
- $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/container_memif?h=rls1804>`_.
VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
in the graph below.
*Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy L2 Ethernet
Switching (base).*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/container_memif && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/container_memif
- $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/container_memif?h=rls1804>`_.
PDR Throughput
*Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy L2 Ethernet
Switching (base).*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/container_memif && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/container_memif
- $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/container_memif?h=rls1804>`_.
VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
in the graph below. PDR measured for 0.5% packet loss ratio.
*Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy L2 Ethernet
Switching (base).*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/container_memif && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/container_memif
- $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/container_memif?h=rls1804>`_.
*Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet
Switching (base).*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/kubernetes/perf/container_memif && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/kubernetes/perf/container_memif
- $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/kubernetes/perf/container_memif?h=rls1804>`_.
VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
in the graph below.
*Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy L2 Ethernet
Switching (base).*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/kubernetes/perf/container_memif && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/kubernetes/perf/container_memif
- $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/kubernetes/perf/container_memif?h=rls1804>`_.
PDR Throughput
*Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy L2 Ethernet
Switching (base).*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/kubernetes/perf/container_memif && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/kubernetes/perf/container_memif
- $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" *
-
-VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
-in the graph below. PDR measured for 0.5% packet loss ratio.
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/kubernetes/perf/container_memif?h=rls1804>`_.
.. raw:: html
*Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy L2 Ethernet
Switching (base).*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/kubernetes/perf/container_memif && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/kubernetes/perf/container_memif
- $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/kubernetes/perf/container_memif?h=rls1804>`_.
*Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPv4 Routed-Forwarding.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4 && grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/ip4
- $ grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4?h=rls1804>`_.
VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
in the graph below.
*Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPv4
Routed-Forwarding.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4 && grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/ip4
- $ grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4?h=rls1804>`_.
PDR Throughput
~~~~~~~~~~~~~~
*Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPv4
Routed-Forwarding.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4 && grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/ip4
- $ grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4?h=rls1804>`_.
VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
in the graph below. PDR measured for 0.5% packet loss ratio.
*Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPv4
Routed-Forwarding.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4 && grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/ip4
- $ grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4?h=rls1804>`_.
*Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPv4 Overlay
Tunnels.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-1t1c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/ip4_tunnels
- $ grep -E "64B-1t1c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4_tunnels?h=rls1804>`_.
VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
in the graph below.
*Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPv4 Overlay Tunnels.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-2t2c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/ip4_tunnels
- $ grep -E "64B-2t2c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4_tunnels?h=rls1804>`_.
PDR Throughput
~~~~~~~~~~~~~~
*Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPv4 Overlay
Tunnels.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-1t1c-ethip4[a-z0-9]+-[a-z0-9]*-pdrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/ip4_tunnels
- $ grep -E "64B-1t1c-ethip4[a-z0-9]+-[a-z0-9]*-pdrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4_tunnels?h=rls1804>`_.
VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
in the graph below. PDR measured for 0.5% packet loss ratio.
*Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPv4 Overlay Tunnels.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-2t2c-ethip4[a-z0-9]+-[a-z0-9]*-pdrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/ip4_tunnels
- $ grep -E "64B-2t2c-ethip4[a-z0-9]+-[a-z0-9]*-pdrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4_tunnels?h=rls1804>`_.
*Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPv6
Routed-Forwarding.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6 && grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/ip6
- $ grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip6?h=rls1804>`_.
VPP NDR 78B packet throughput in 2t2c setup (2thread, 2core) is presented
in the graph below.
*Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPv6
Routed-Forwarding.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6 && grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/ip6
- $ grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip6?h=rls1804>`_.
PDR Throughput
~~~~~~~~~~~~~~
*Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPv6
Routed-Forwarding.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6 && grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*pdrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/ip6
- $ grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*pdrdisc" *
-
-VPP PDR 78B packet throughput in 2t2c setup (2thread, 2core) is presented
-in the graph below. PDR measured for 0.5% packet loss ratio.
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip6?h=rls1804>`_.
.. raw:: html
*Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPv6
Routed-Forwarding.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6 && grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*pdrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/ip6
- $ grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*pdrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip6?h=rls1804>`_.
*Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPv6 Overlay
Tunnels.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/ip6_tunnels
- $ grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip6_tunnels?h=rls1804>`_.
VPP NDR 78B packet throughput in 2t2c setup (2thread, 2core) is presented
in the graph below.
*Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPv6 Overlay
Tunnels.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/ip6_tunnels
- $ grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip6_tunnels?h=rls1804>`_.
PDR Throughput
~~~~~~~~~~~~~~
*Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPv6 Overlay
Tunnels.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-pdrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/ip6_tunnels
- $ grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-pdrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip6_tunnels?h=rls1804>`_.
VPP PDR 78B packet throughput in 2t2c setup (2thread, 2core) is presented
in the graph below. PDR measured for 0.5% packet loss ratio.
*Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPv6 Overlay
Tunnels.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-2t2c-ethip6[a-z0-9]+-[a-z0-9]*-pdrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/ip6_tunnels
- $ grep -E "78B-2t2c-ethip6[a-z0-9]+-[a-z0-9]*-pdrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip6_tunnels?h=rls1804>`_.
*Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPSEC HW.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/crypto && grep -E "64B-1t1c-(ethip4ipsecbasetnl|ethip4ipsecscale1000tnl|ethip4ipsectptlispgpe)-.*-ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/crypto
- $ grep -E "64B-1t1c-(ethip4ipsecbasetnl|ethip4ipsecscale1000tnl|ethip4ipsectptlispgpe)-.*-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/crypto?h=rls1804>`_.
VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
in the graph below.
*Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPSEC HW.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/crypto && grep -E "64B-2t2c-(ethip4ipsecbasetnl|ethip4ipsecscale1000tnl|ethip4ipsectptlispgpe)-.*-ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/crypto
- $ grep -E "64B-2t2c-(ethip4ipsecbasetnl|ethip4ipsecscale1000tnl|ethip4ipsectptlispgpe)-.*-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/crypto?h=rls1804>`_.
PDR Throughput
~~~~~~~~~~~~~~
*Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPSEC HW.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/crypto && grep -E "64B-1t1c-(ethip4ipsecbasetnl|ethip4ipsecscale1000tnl|ethip4ipsectptlispgpe)-.*-pdrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/crypto
- $ grep -E "64B-1t1c-(ethip4ipsecbasetnl|ethip4ipsecscale1000tnl|ethip4ipsectptlispgpe)-.*-pdrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/crypto?h=rls1804>`_.
VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
in the graph below. PDR measured for 0.5% packet loss ratio.
*Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPSEC HW.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/crypto && grep -E "64B-2t2c-(ethip4ipsecbasetnl|ethip4ipsecscale1000tnl|ethip4ipsectptlispgpe)-.*-pdrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/crypto
- $ grep -E "64B-2t2c-(ethip4ipsecbasetnl|ethip4ipsecscale1000tnl|ethip4ipsectptlispgpe)-.*-pdrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/crypto?h=rls1804>`_.
*Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet
Switching (base).*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2/ && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/l2?h=rls1804>`_.
.. raw:: html
*Figure 2. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet
Switching (feature).*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2 && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl(10|50)(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl(10|50)-state(ful|less)-flows10k.*)-ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/l2
- $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl(10|50)(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl(10|50)-state(ful|less)-flows10k.*)-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/l2?h=rls1804>`_.
VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
in the graph below.
*Figure 3. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy L2 Ethernet
Switching (base).*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2/ && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/*
-
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/l2?h=rls1804>`_.
.. raw:: html
*Figure 4. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy L2 Ethernet
Switching (feature).*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2 && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl(10|50)(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl(10|50)-state(ful|less)-flows10k.*)-ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/l2
- $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl(10|50)(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl(10|50)-state(ful|less)-flows10k.*)-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/l2?h=rls1804>`_.
PDR Throughput
*Figure 5. VPP 1thread 1core - PDR Throughput for Phy-to-Phy L2 Ethernet
Switching (base).*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2/ && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*pdrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/*
-
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/l2?h=rls1804>`_.
.. raw:: html
*Figure 6. VPP 1thread 1core - PDR Throughput for Phy-to-Phy L2 Ethernet
Switching (feature).*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2 && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl(10|50)(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl(10|50)-state(ful|less)-flows10k.*)-pdrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/l2
- $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl(10|50)(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl(10|50)-state(ful|less)-flows10k.*)-pdrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/l2?h=rls1804>`_.
VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
in the graph below. PDR measured for 0.5% packet loss ratio.
*Figure 7. VPP 2thread 2core - PDR Throughput for Phy-to-Phy L2 Ethernet
Switching (base).*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2/ && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*pdrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/*
-
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/l2?h=rls1804>`_.
.. raw:: html
*Figure 8. VPP 2thread 2core - PDR Throughput for Phy-to-Phy L2 Ethernet
Switching (feature).*
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2 && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl(10|50)(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl(10|50)-state(ful|less)-flows10k.*)-pdrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/l2
- $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl(10|50)(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl(10|50)-state(ful|less)-flows10k.*)-pdrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/l2?h=rls1804>`_.
*Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy SRv6.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/srv6 && grep -E "78B-1t1c-ethip6.*srv6.*ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/srv6
- $ grep -E "78B-1t1c-ethip6.*srv6.*ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/srv6?h=rls1804>`_.
VPP NDR 78B packet throughput in 2t2c setup (2thread, 2core) is presented
in the graph below.
*Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy SRv6.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/srv6 && grep -E "78B-2t2c-ethip6.*srv6.*ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/srv6
- $ grep -E "78B-2t2c-ethip6.*srv6.*ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/srv6?h=rls1804>`_.
PDR Throughput
~~~~~~~~~~~~~~
*Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy SRv6.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/srv6 && grep -E "78B-1t1c-ethip6.*srv6.*pdrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/srv6
- $ grep -E "78B-1t1c-ethip6.*srv6.*pdrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/srv6?h=rls1804>`_.
VPP PDR 78B packet throughput in 2t2c setup (2thread, 2core) is presented
in the graph below. PDR measured for 0.5% packet loss ratio.
*Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPv6
Routed-Forwarding.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/srv6 && grep -E "78B-2t2c-ethip6.*srv6.*pdrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/srv6
- $ grep -E "78B-2t2c-ethip6.*srv6.*pdrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/srv6?h=rls1804>`_.
*Figure 1a. VPP 1thread 1core - NDR Throughput for Phy-to-VM-to-Phy VM vhost-user
selected TCs.*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.
+
.. raw:: html
<iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-vhost-sel2-ndrdisc.html"></iframe>
*Figure 1b. VPP 1thread 1core - NDR Throughput for Phy-to-VM-to-Phy VM
vhost-user selected TCs.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-1t1c-(eth|ethip4)-.*vhost.*-ndrdisc" *0-eth*-*-ndrpdrdisc.robot
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/vm_vhost
- $ grep -E "64B-1t1c-(eth|ethip4)-.*vhost.*-pdrdisc" *0-eth*-*-ndrpdrdisc.robot
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.
VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
in the graph below.
*Figure 2a. VPP 2threads 2cores - NDR Throughput for Phy-to-VM-to-Phy VM
vhost-user selected TCs.*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.
+
.. raw:: html
<iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-vhost-sel2-ndrdisc.html"></iframe>
*Figure 2b. VPP 2threads 2cores - NDR Throughput for Phy-to-VM-to-Phy VM
vhost-user selected TCs.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-2t2c-(eth|ethip4)-.*vhost.*-ndrdisc" *0-eth*-*-ndrpdrdisc.robot
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/vm_vhost
- $ grep -E "64B-2t2c-(eth|ethip4)-.*vhost.*-pdrdisc" *0-eth*-*-ndrpdrdisc.robot
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.
PDR Throughput
~~~~~~~~~~~~~~
*Figure 3a. VPP 1thread 1core - PDR Throughput for Phy-to-VM-to-Phy VM
vhost-user selected TCs.*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.
+
.. raw:: html
<iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-vhost-sel2-pdrdisc.html"></iframe>
*Figure 3b. VPP 1thread 1core - PDR Throughput for Phy-to-VM-to-Phy VM
vhost-user selected TCs.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-1t1c-(eth|ethip4)-.*vhost.*-pdrdisc" *0-eth*-*-ndrpdrdisc.robot
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/vm_vhost
- $ grep -E "64B-1t1c-(eth|ethip4)-.*vhost.*-pdrdisc" *0-eth*-*-ndrpdrdisc.robot
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.
VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
in the graph below. PDR measured for 0.5% packet loss ratio.
*Figure 4a. VPP 2thread 2core - PDR Throughput for Phy-to-VM-to-Phy VM
vhost-user selected TCs.*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.
+
.. raw:: html
<iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-vhost-sel2-pdrdisc.html"></iframe>
*Figure 4b. VPP 2thread 2core - PDR Throughput for Phy-to-VM-to-Phy VM
vhost-user selected TCs.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-2t2c-(eth|ethip4)-.*vhost.*-pdrdisc" *0-eth*-*-ndrpdrdisc.robot
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/vm_vhost
- $ grep -E "64B-2t2c-(eth|ethip4)-.*vhost.*-pdrdisc" *0-eth*-*-ndrpdrdisc.robot
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.
*Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
NDR Throughput for Phy-to-Phy L2 Ethernet Switching (base).*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/container_memif && grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/container_memif
- $ grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/container_memif?h=rls1804>`_.
PDR Throughput
--------------
*Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
PDR Throughput for Phy-to-Phy L2 Ethernet Switching (base).*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/container_memif && grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/container_memif
- $ grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/container_memif?h=rls1804>`_.
*Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet
Switching (base).*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/kubernetes/perf/container_memif && grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" 10ge2p1x520*
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/kubernetes/perf/container_memif
- $ grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" 10ge2p1x520*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/kubernetes/perf/container_memif?h=rls1804>`_.
NIC 10ge2p1x710
~~~~~~~~~~~~~~~
*Figure 2. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet
Switching (base).*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/kubernetes/perf/container_memif && grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" 10ge2p1x710*
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/kubernetes/perf/container_memif
- $ grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" 10ge2p1x710*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/kubernetes/perf/container_memif?h=rls1804>`_.
PDR Throughput
--------------
*Figure 3. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet
Switching (base).*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/kubernetes/perf/container_memif && grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" 10ge2p1x520*
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/kubernetes/perf/container_memif
- $ grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" 10ge2p1x520*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/kubernetes/perf/container_memif?h=rls1804>`_.
NIC 10ge2p1x710
~~~~~~~~~~~~~~~
*Figure 4. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet
Switching (base).*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/kubernetes/perf/container_memif && grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" 10ge2p1x710*
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/kubernetes/perf/container_memif
- $ grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" 10ge2p1x710*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/kubernetes/perf/container_memif?h=rls1804>`_.
*Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
NDR Throughput for Phy-to-Phy IPv4 Routed-Forwarding.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4 && grep -E '64B-(1t1c|2t2c|4t4c)-ethip4-ip4(base|scale[a-z0-9]*)*-ndrdisc' 10ge2p1x520*
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/ip4
- $ grep -E '64B-(1t1c|2t2c|4t4c)-ethip4-ip4(base|scale[a-z0-9]*)*-ndrdisc' 10ge2p1x520*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4?h=rls1804>`_.
NIC 40ge2p1xl710
~~~~~~~~~~~~~~~~
*Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
NDR Throughput for Phy-to-Phy IPv4 Routed-Forwarding.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4 && grep -P '64B-(1t1c|2t2c|4t4c)-ethip4-ip4(base|scale[a-z0-9]*)*-ndrdisc' 40ge2p1xl710*
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/ip4
- $ grep -P '64B-(1t1c|2t2c|4t4c)-ethip4-ip4(base|scale[a-z0-9]*)*-ndrdisc' 40ge2p1xl710*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4?h=rls1804>`_.
PDR Throughput
--------------
*Figure 3. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
PDR Throughput for Phy-to-Phy IPv4 Routed-Forwarding.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4 && grep -E '64B-(1t1c|2t2c|4t4c)-ethip4-ip4(base|scale[a-z0-9]*)*-ndrdisc' 10ge2p1x520*
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/ip4
- $ grep -E '64B-(1t1c|2t2c|4t4c)-ethip4-ip4(base|scale[a-z0-9]*)*-ndrdisc' 10ge2p1x520*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4?h=rls1804>`_.
*Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
NDR Throughput for Phy-to-Phy IPv4 Overlay Tunnels.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-(1t1c|2t2c|4t4c)-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/ip4_tunnels
- $ grep -E "64B-(1t1c|2t2c|4t4c)-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4_tunnels?h=rls1804>`_.
PDR Throughput
--------------
*Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
PDR Throughput for Phy-to-Phy IPv4 Overlay Tunnels.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-(1t1c|2t2c|4t4c)-ethip4[a-z0-9]+-[a-z0-9]*-pdrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/ip4_tunnels
- $ grep -E "64B-(1t1c|2t2c|4t4c)-ethip4[a-z0-9]+-[a-z0-9]*-pdrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4_tunnels?h=rls1804>`_.
*Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
NDR Throughput for Phy-to-Phy IPv6 Routed-Forwarding.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6 && grep -E '78B-(1t1c|2t2c|4t4c)-ethip6-ip6(base|scale[a-z0-9]*)*-ndrdisc' 10ge2p1x520*
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/ip6
- $ grep -E '78B-(1t1c|2t2c|4t4c)-ethip6-ip6(base|scale[a-z0-9]*)*-ndrdisc' 10ge2p1x520*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip6?h=rls1804>`_.
NIC 40ge2p1xl710
~~~~~~~~~~~~~~~~
*Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
NDR Throughput for Phy-to-Phy IPv6 Routed-Forwarding.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6 && grep -E '78B-(1t1c|2t2c|4t4c)-ethip6-ip6(base|scale[a-z0-9]*)*-ndrdisc' 40ge2p1xl710*
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/ip6
- $ grep -E '78B-(1t1c|2t2c|4t4c)-ethip6-ip6(base|scale[a-z0-9]*)*-ndrdisc' 40ge2p1xl710*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip6?h=rls1804>`_.
PDR Throughput
--------------
*Figure 3. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
PDR Throughput for Phy-to-Phy IPv6 Routed-Forwarding.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6 && grep -E '78B-(1t1c|2t2c|4t4c)-ethip6-ip6(base|scale[a-z0-9]*)*-pdrdisc' 10ge2p1x520*
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/ip6
- $ grep -E '78B-(1t1c|2t2c|4t4c)-ethip6-ip6(base|scale[a-z0-9]*)*-pdrdisc' 10ge2p1x520*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip6?h=rls1804>`_.
*Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
NDR Throughput for Phy-to-Phy IPv6 Overlay Tunnels.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-(1t1c|2t2c|4t4c)-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/ip6_tunnels
- $ grep -E "78B-(1t1c|2t2c|4t4c)-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip6_tunnels?h=rls1804>`_.
PDR Throughput
--------------
*Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
PDR Throughput for Phy-to-Phy IPv6 Overlay Tunnels.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-(1t1c|2t2c|4t4c)-ethip6[a-z0-9]+-[a-z0-9]*-pdrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/ip6_tunnels
- $ grep -E "78B-(1t1c|2t2c|4t4c)-ethip6[a-z0-9]+-[a-z0-9]*-pdrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip6_tunnels?h=rls1804>`_.
*Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
NDR Throughput for Phy-to-Phy IPSEC HW.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/crypto && grep -E "64B-(1t1c|2t2c|4t4c)-ethip4ipsec(base|tpt).*-ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/crypto
- $ grep -E "64B-(1t1c|2t2c|4t4c)-ethip4ipsec(base|tpt).*-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/crypto?h=rls1804>`_.
PDR Throughput
--------------
*Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
PDR Throughput for Phy-to-Phy IPSEC HW.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/crypto && grep -E "64B-(1t1c|2t2c|4t4c)-ethip4ipsec(base|tpt).*-ndrdisc" *
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/crypto
- $ grep -E "64B-(1t1c|2t2c|4t4c)-ethip4ipsec(base|tpt).*-ndrdisc" *
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/crypto?h=rls1804>`_.
*Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
NDR Throughput for Phy-to-Phy L2 Ethernet Switching.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2 && grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-(eth.*)*ndrdisc" 10ge2p1x520*
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-(eth.*)*ndrdisc" tests/vpp/perf/l2/10ge2p1x520*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/l2?h=rls1804>`_.
NIC 40ge2p1xl710
~~~~~~~~~~~~~~~~
*Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
NDR Throughput for Phy-to-Phy L2 Ethernet Switching.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2 && grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" 40ge2p1xl710*
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/40ge2p1xl710*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/l2?h=rls1804>`_.
PDR Throughput
--------------
*Figure 3. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
PDR Throughput for Phy-to-Phy L2 Ethernet Switching.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2 && grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-(eth.*)*pdrdisc" 10ge2p1x520*
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-(eth.*)*pdrdisc" tests/vpp/perf/l2/10ge2p1x520*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/l2?h=rls1804>`_.
*Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
NDR Throughput for Phy-to-Phy SRv6.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/srv6 && grep -E '78B-(1t1c|2t2c|4t4c)-ethip6.*srv6.*ndrdisc' 10ge2p1x520*
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/srv6
- $ grep -E '78B-(1t1c|2t2c|4t4c)-ethip6.*srv6.*ndrdisc' 10ge2p1x520*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/srv6?h=rls1804>`_.
PDR Throughput
--------------
*Figure 3. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
PDR Throughput for Phy-to-Phy SRv6.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/srv6 && grep -E '78B-(1t1c|2t2c|4t4c)-ethip6.*srv6.*pdrdisc' 10ge2p1x520*
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/srv6
- $ grep -E '78B-(1t1c|2t2c|4t4c)-ethip6.*srv6.*pdrdisc' 10ge2p1x520*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/srv6?h=rls1804>`_.
*Figure 1a. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
NDR Throughput for Phy-to-Phy VM vhost-user selected TCs.*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.
+
.. raw:: html
<iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/10ge2p1x520-64B-vhost-sel2-tsa-ndrdisc.html"></iframe>
*Figure 1b. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
NDR Throughput for Phy-to-Phy VM vhost-user selected TCs.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-(1t1c|2t2c|4t4c)-(eth|ethip4)-.*vhost.*-ndrdisc" 10ge2p1x520*-ndrpdrdisc.robot
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/vm_vhost
- $ grep -E "grep -E "64B-(1t1c|2t2c|4t4c)-(eth|ethip4)-.*vhost.*-ndrdisc" 10ge2p1x520*-ndrpdrdisc.robot
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.
NIC 10ge2p1x710
~~~~~~~~~~~~~~~
*Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
NDR Throughput for Phy-to-Phy VM vhost-user selected TCs.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-(1t1c|2t2c|4t4c)-.*vhost.*-ndrdisc" 10ge2p1x710*
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/vm_vhost
- $ grep -E "64B-(1t1c|2t2c|4t4c)-.*vhost.*-ndrdisc" 10ge2p1x710*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.
NIC 40ge2p1xl710
~~~~~~~~~~~~~~~~
*Figure 3a. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
NDR Throughput for Phy-to-Phy VM vhost-user selected TCs.*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.
+
.. raw:: html
<iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/40ge2p1xl710-64B-vhost-sel2-tsa-ndrdisc.html"></iframe>
*Figure 3b. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
NDR Throughput for Phy-to-Phy VM vhost-user selected TCs.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-(1t1c|2t2c|4t4c)-.*vhost.*-ndrdisc" 40ge2p1xl710*
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/vm_vhost
- $ grep -E "64B-(1t1c|2t2c|4t4c)-.*vhost.*-ndrdisc" 40ge2p1xl710*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.
PDR Throughput
--------------
*Figure 4a. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
PDR Throughput for Phy-to-Phy VM vhost-user selected TCs.*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.
+
.. raw:: html
<iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/10ge2p1x520-64B-vhost-sel2-tsa-pdrdisc.html"></iframe>
*Figure 4b. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
PDR Throughput for Phy-to-Phy VM vhost-user selected TCs.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-(1t1c|2t2c|4t4c)-(eth|ethip4)-.*vhost.*-pdrdisc" 10ge2p1x520*-ndrpdrdisc.robot
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/vm_vhost
- $ grep -E "grep -E "64B-(1t1c|2t2c|4t4c)-(eth|ethip4)-.*vhost.*-pdrdisc" 10ge2p1x520*-ndrpdrdisc.robot
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.
NIC 10ge2p1x710
~~~~~~~~~~~~~~~
*Figure 5. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
PDR Throughput for Phy-to-Phy VM vhost-user selected TCs.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-(1t1c|2t2c|4t4c)-.*vhost.*-pdrdisc" 10ge2p1x710*
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/vm_vhost
- $ grep -E "64B-(1t1c|2t2c|4t4c)-.*vhost.*-pdrdisc" 10ge2p1x710*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.
NIC 40ge2p1xl710
~~~~~~~~~~~~~~~~
*Figure 6a. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
PDR Throughput for Phy-to-Phy VM vhost-user selected TCs.*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.
+
.. raw:: html
<iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/40ge2p1xl710-64B-vhost-sel2-tsa-pdrdisc.html"></iframe>
*Figure 6b. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
PDR Throughput for Phy-to-Phy VM vhost-user selected TCs.*
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-(1t1c|2t2c|4t4c)-.*vhost.*-pdrdisc" 40ge2p1xl710*
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/vm_vhost
- $ grep -E "64B-(1t1c|2t2c|4t4c)-.*vhost.*-pdrdisc" 40ge2p1xl710*
+CSIT source code for the test cases used for above plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls1804>`_.