Neale Ranns [Wed, 13 Feb 2019 10:08:06 +0000 (02:08 -0800)]
IPSEC: restack SAs on backend change
Change-Id: I5852ca02d684fa9d59e1690efcaca06371c5faff
Signed-off-by: Neale Ranns <nranns@cisco.com>
Neale Ranns [Tue, 12 Feb 2019 14:18:30 +0000 (06:18 -0800)]
VOM: neighbour API flags
Change-Id: Ia664cd4c77f1c5b4bc46c5e191bb57704b3ccc46
Signed-off-by: Neale Ranns <nranns@cisco.com>
Dave Barach [Mon, 11 Feb 2019 23:44:18 +0000 (18:44 -0500)]
fix assert failure
Change-Id: I9a2e8ea2bf334dd8dabf3d25abbcc91087a43882
Signed-off-by: Dave Barach <dbarach@cisco.com>
Kingwel Xie [Tue, 12 Feb 2019 11:45:08 +0000 (06:45 -0500)]
ipsec: cli bug fix
1. unformat_ip46_address must have ip-type specified
2. cannot unformat ip46_address_t with unformat_ip4_address
Change-Id: I5f1eecfe71a808302428afb39f910ebf0c7cef71
Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
Neale Ranns [Mon, 11 Feb 2019 11:24:07 +0000 (11:24 +0000)]
IPSEC-tun: The tunnel DB uses the network order SPI to save the byte swap in the DP
Change-Id: I78a1c39682d5afd356a3cfe70097fc682e8cb938
Signed-off-by: Neale Ranns <nranns@cisco.com>
Florin Coras [Sat, 9 Feb 2019 21:51:25 +0000 (13:51 -0800)]
session: add config for evt qs segment size
Change-Id: I286d0d53a9ef2d6e28cd301eae25fc119d491f22
Signed-off-by: Florin Coras <fcoras@cisco.com>
Florin Coras [Sat, 9 Feb 2019 02:27:29 +0000 (18:27 -0800)]
session: cleanup application interface
Change-Id: I89d240753b3f3c5e984aa303a7c8fa35fa59bf7f
Signed-off-by: Florin Coras <fcoras@cisco.com>
Kingwel Xie [Mon, 4 Feb 2019 09:49:29 +0000 (01:49 -0800)]
ipsec: multi-arch, next-node-index cleanup
1. specify ipsec_xxx_node.c in MULTIARCH_SOURCES
2. cleanup foreach_ipsec_output_next & foreach_ipsec_input_next,
as next-nodes are actually added by ipsec_register_xx_backend dynamically
thus, ipsec4-input-feature will point to ah4/esp4-encrypt, instead of
pointing to ah6/esp6-encrypt
3. remove an unused count and add counter IPSEC_INPUT_ERROR_RX_MATCH_PKTS
in ipsec-input
Change-Id: Ifcf167812d2cc18187c2cea84b657a52b67e17d4
Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
Damjan Marion [Sat, 9 Feb 2019 22:29:26 +0000 (23:29 +0100)]
buffers: fix typo
Change-Id: I4e836244409c98739a13092ee252542a2c5fe259
Signed-off-by: Damjan Marion <damarion@cisco.com>
Florin Coras [Thu, 7 Feb 2019 23:34:52 +0000 (15:34 -0800)]
tls: move test certificates to separate header file
Change-Id: I543cb78e268d7a4a7fba590d305351ec79f4e4da
Signed-off-by: Florin Coras <fcoras@cisco.com>
Florin Coras [Wed, 6 Feb 2019 04:55:11 +0000 (20:55 -0800)]
session: refactor listen logic
Make app-listener the handle for app listens. Consequently transport and
local listen sessions are now associated to the app-listener.
Change-Id: I9397a26d42cccb100970b6b4794c15bac2e11465
Signed-off-by: Florin Coras <fcoras@cisco.com>
Florin Coras [Thu, 7 Feb 2019 18:31:08 +0000 (10:31 -0800)]
tcp: fix fib_index for v6 ll packets
Change-Id: Ie69bdb9860d61f2c599c0c80b0ea80dfdfe178bd
Signed-off-by: Florin Coras <fcoras@cisco.com>
Neale Ranns [Thu, 7 Feb 2019 07:00:16 +0000 (23:00 -0800)]
IPSEC: remove unused members of main struct
Change-Id: Ib55deb620f4f58cac07da7cb69418a3a30ff3136
Signed-off-by: Neale Ranns <nranns@cisco.com>
Neale Ranns [Wed, 6 Feb 2019 09:41:05 +0000 (01:41 -0800)]
IPSEC: no second lookup after tunnel encap
in the same maaner as with other tunnel tyeps we use
the FIB to cache and track the destination used to reach
the tunnel endpoint. Post encap we can then ship the packet
straight to this adjacency and thus elide the costly second
lookup.
- SA add and del function so they can be used both directly
from the API and for tunnels.
- API change for the SA dump to use the SA type
- ipsec_key_t type for convenience (copying, [un]formating)
- no matching tunnel counters in ipsec-if-input
Change-Id: I9d144a59667f7bf96442f4ca66bef5c1d3c7f1ea
Signed-off-by: Neale Ranns <nranns@cisco.com>
Benoît Ganne [Thu, 7 Feb 2019 12:21:42 +0000 (13:21 +0100)]
Fix parsing overflow in unformat_mac_address_t()
'%x' unformat specifier expects a pointer to a 4-byte object and will
overflow when using a pointer to a 1-byte object. Use '%X' instead which
allows to pass the size of the object alongside its pointer.
The bug was exposed with the following commands:
~# make run
DBGvpp# loop create
loop0
DBGvpp# set ip6 neigh loop0 3001::2 a:a:a:a:a:a
DBGvpp# show ip6 neigh
Time Address Flags Link layer Interface
35.7743 ::2 D 0a:0a:0a:0a:0a:0a loop0
^^^
wrong address: should be 3001::2
Note that the bug impact depends from the parsing order and memory
layout.
Change-Id: I29ba2eb53ba5a2daf4517215602d027508e2cb9f
Signed-off-by: Benoît Ganne <bganne@cisco.com>
Florin Coras [Thu, 7 Feb 2019 08:15:53 +0000 (00:15 -0800)]
tcp: fix reset sending in syn-sent
Change-Id: I468b1015bca5f95b162fb49e904aa4e4d38db75e
Signed-off-by: Florin Coras <fcoras@cisco.com>
Damjan Marion [Wed, 6 Feb 2019 13:22:32 +0000 (14:22 +0100)]
buffers: make buffer data size configurable from startup config
Example:
buffers {
default data-size 1536
}
Change-Id: I5b4436850ca18025c9fdcfc7ed648c2c2732d660
Signed-off-by: Damjan Marion <damarion@cisco.com>
Damjan Marion [Wed, 6 Feb 2019 16:56:57 +0000 (17:56 +0100)]
buffers: improve buffer init performance
Change-Id: Ib59a3c32af754a898ade17c42e60a88f48b797ff
Signed-off-by: Damjan Marion <damarion@cisco.com>
Mohsin Kazmi [Thu, 31 Jan 2019 13:50:56 +0000 (13:50 +0000)]
virtio: enable msix interrupt mode
Change-Id: Idd560f3afde1dd03bc3d6fbb2070096146865f50
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Mohsin Kazmi [Thu, 31 Jan 2019 13:18:00 +0000 (13:18 +0000)]
virtio: Use new buffer optimization
Change-Id: Ifc98373371b967c49a75989eac415ddda1dcf15f
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Sergio Gonzalez Monroy [Mon, 4 Feb 2019 23:02:37 +0000 (00:02 +0100)]
dpdp-crypto: fix cryptodev segfault with dpdk 19.02
DPDK 19.02 adds two new fields to struct rte_cryptodev_qp_conf,
which the current code was not initializing properly.
Also session mempools are now required to have specific private data.
For that just use the new API to create symmetric session pools.
Change-Id: Ie732d4e10b908aeaea322717d6011113e3e7172c
Signed-off-by: Sergio Gonzalez Monroy <sgmonroy@gmail.com>
Florin Coras [Tue, 5 Feb 2019 23:51:15 +0000 (15:51 -0800)]
transport: cleanup
- move transport specific types to transport_types
- add transport wrapper functions for interaction with transport
protocol vfts
Change-Id: I93f70d884585fc2f41c4a605e310c80e8a8972f2
Signed-off-by: Florin Coras <fcoras@cisco.com>
Andrew Yourtchenko [Mon, 21 Jan 2019 14:22:05 +0000 (15:22 +0100)]
Update to doxygen documentation for release 19.01
Change-Id: Id19cefc24d391f0437a0355f5328505ec21aa58a
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
(cherry picked from commit
44f14358cfe37a750f4541e5919b0c7877b6d46e)
Yichen Wang [Tue, 5 Feb 2019 06:27:20 +0000 (22:27 -0800)]
Fix borken install-dep on RHEL
Change-Id: I247cca88e33f782e1acb72eb2c0e1515faf2f030
Signed-off-by: Yichen Wang <yicwang@cisco.com>
Tomasz Kulasek [Thu, 31 Jan 2019 17:26:32 +0000 (18:26 +0100)]
sock api: allow to start client with no rx_thread
Change-Id: Ia30ff1e62304e65f27497ce05f8e40631c06d69e
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Florin Coras [Tue, 5 Feb 2019 07:01:34 +0000 (23:01 -0800)]
session: cleanup part 3
Aggregate session specific types, getters and setters under
session_types.h
Change-Id: Ib205337502654969d60c72d1800c90247e1a9068
Signed-off-by: Florin Coras <fcoras@cisco.com>
Neale Ranns [Tue, 5 Feb 2019 15:17:11 +0000 (07:17 -0800)]
VOM: vxlan_tunnel equals operator
Change-Id: I0e524b5d7c02a099b6ce84e6a0c116b19200879d
Signed-off-by: Neale Ranns <nranns@cisco.com>
Kingwel Xie [Fri, 25 Jan 2019 10:18:51 +0000 (05:18 -0500)]
crypto-input: fix broken buffer trace issue
dpdk_crypto_input_trace was called before vlib_buffer_enqueue_to_next
then VLIB_FRAME_TRACE of next_frame->flag will be overwritten by
vlib_next_frame_change_ownership(), leading to a broken trace.
now it is working:
Packet 1
00:00:15:654983: dpdk-crypto-input
dev_id 0 next-index 1
00:00:15:654999: ip4-lookup
fib 0 dpo-idx 0 flow hash: 0x00000000
IPSEC_ESP: 18.1.0.71 -> 18.1.0.241
tos 0x00, ttl 254, length 168, checksum 0x96ea
......
Change-Id: I73d77c06c11db8911866adb6240b2565b690f469
Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
Florin Coras [Mon, 4 Feb 2019 03:28:34 +0000 (19:28 -0800)]
session: cleanup part 2
Move app worker logic to app_worker.c
Change-Id: Ic5e5735b2884f006c064d023f491aa6888114810
Signed-off-by: Florin Coras <fcoras@cisco.com>
Neale Ranns [Mon, 4 Feb 2019 09:10:30 +0000 (01:10 -0800)]
IPSEC: SPD counters in the stats sgement
- return the stats_index of each SPD in the create API call
- no ip_any in the API as this creates 2 SPD entries. client must add both v4 and v6 explicitly
- only one pool of SPD entries (rhter than one per-SPD) to support this
- no packets/bytes in the dump API. Polling the stats segment is much more efficient
(if the SA lifetime is based on packet/bytes)
- emit the policy index in the packet trace and CLI commands.
Change-Id: I7eaf52c9d0495fa24450facf55229941279b8569
Signed-off-by: Neale Ranns <nranns@cisco.com>
Dave Barach [Mon, 4 Feb 2019 22:41:29 +0000 (17:41 -0500)]
g2-only: add (min,max) stats to the anomaly detector
Shows up on the status line.
Change-Id: I14635f7406069a4a868bdb7c8b85da941c49dbba
Signed-off-by: Dave Barach <dave@barachs.net>
Florin Coras [Sun, 3 Feb 2019 23:26:14 +0000 (15:26 -0800)]
session: cleanup part 1
Rename core data structures. This will break compatibility for out of
tree builtin apps.
- stream_session_t to session_t
- server_rx/tx_fifo to rx/tx_fifo
- stream_session.h to session_types.h
- update copyright
Change-Id: I414097c6e28bcbea866fbf13b8773c7db3f49325
Signed-off-by: Florin Coras <fcoras@cisco.com>
Paul Vinciguerra [Fri, 25 Jan 2019 22:05:48 +0000 (14:05 -0800)]
VTL Cleanup: Fix missing calls to setUpClass/tearDownClass, fix numerous TypeErrors.
* TypeError: assertIsNotNone() got an unexpected keyword argument 'msg'
* Correct missing calls to setUpClass/tearDownClass.
If you want the setUpClass and tearDownClass on base classes called then you must call up to them yourself.
The implementations in TestCase are empty.
https://docs.python.org/2/library/unittest.html#setupclass-and-teardownclass
Cleans up issues in parallel test mode:
-------------
FAILURES AND ERRORS IN TESTS:
Testcase name: VCL Thru Host Stack Bidir Nsock
FAILURE: test_vcl.VCLThruHostStackBidirNsock.test_vcl_thru_host_stack_bi_dir_nsock [test_vcl.VCLThruHostStackBidirNsock.test_vcl_thru_host_stack_bi_dir_nsock]
Testcase name: Bidirectional Forwarding Detection (BFD) (changing auth)
ERROR: test_bfd.BFDAuthOnOffTestCase.test_auth_change_key_delayed [test_bfd.BFDAuthOnOffTestCase.test_auth_change_key_delayed]
ERROR: test_bfd.BFDAuthOnOffTestCase.test_auth_change_key_immediate [test_bfd.BFDAuthOnOffTestCase.test_auth_change_key_immediate]
ERROR: test_bfd.BFDAuthOnOffTestCase.test_auth_off_delayed [test_bfd.BFDAuthOnOffTestCase.test_auth_off_delayed]
ERROR: test_bfd.BFDAuthOnOffTestCase.test_auth_off_immediate [test_bfd.BFDAuthOnOffTestCase.test_auth_off_immediate]
ERROR: test_bfd.BFDAuthOnOffTestCase.test_auth_on_delayed [test_bfd.BFDAuthOnOffTestCase.test_auth_on_delayed]
ERROR: test_bfd.BFDAuthOnOffTestCase.test_auth_on_immediate [test_bfd.BFDAuthOnOffTestCase.test_auth_on_immediate]
Testcase name: Punt Socket for IPv4
ERROR: test_punt.TestIP4PuntSocket.test_punt_socket_dump [test_punt.TestIP4PuntSocket.test_punt_socket_dump]
ERROR: test_punt.TestIP4PuntSocket.test_punt_socket_traffic_multi_port_multi_sockets [test_punt.TestIP4PuntSocket.test_punt_socket_traffic_multi_port_multi_sockets]
ERROR: test_punt.TestIP4PuntSocket.test_punt_socket_traffic_multi_ports_single_socket [test_punt.TestIP4PuntSocket.test_punt_socket_traffic_multi_ports_single_socket]
ERROR: test_punt.TestIP4PuntSocket.test_punt_socket_traffic_single_port_single_socket [test_punt.TestIP4PuntSocket.test_punt_socket_traffic_single_port_single_socket]
Testcase name: Bidirectional Forwarding Detection (BFD) (IPv6)
ERROR: test_bfd.BFD6TestCase.test_echo [test_bfd.BFD6TestCase.test_echo]
ERROR: test_bfd.BFD6TestCase.test_echo_looped_back [test_bfd.BFD6TestCase.test_echo_looped_back]
ERROR: test_bfd.BFD6TestCase.test_intf_deleted [test_bfd.BFD6TestCase.test_intf_deleted]
ERROR: test_bfd.BFD6TestCase.test_session_up [test_bfd.BFD6TestCase.test_session_up]
ERROR: test_bfd.BFD6TestCase.test_session_up_by_ip [test_bfd.BFD6TestCase.test_session_up_by_ip]
Testcase name: Bidirectional Forwarding Detection (BFD) (CLI)
ERROR: test_bfd.BFDCLITestCase.test_add_mod_del_bfd_udp [test_bfd.BFDCLITestCase.test_add_mod_del_bfd_udp]
ERROR: test_bfd.BFDCLITestCase.test_add_mod_del_bfd_udp6 [test_bfd.BFDCLITestCase.test_add_mod_del_bfd_udp6]
ERROR: test_bfd.BFDCLITestCase.test_add_mod_del_bfd_udp6_auth [test_bfd.BFDCLITestCase.test_add_mod_del_bfd_udp6_auth]
ERROR: test_bfd.BFDCLITestCase.test_add_mod_del_bfd_udp_auth [test_bfd.BFDCLITestCase.test_add_mod_del_bfd_udp_auth]
ERROR: test_bfd.BFDCLITestCase.test_admin_up_down [test_bfd.BFDCLITestCase.test_admin_up_down]
ERROR: test_bfd.BFDCLITestCase.test_auth_on_off [test_bfd.BFDCLITestCase.test_auth_on_off]
ERROR: test_bfd.BFDCLITestCase.test_auth_on_off_delayed [test_bfd.BFDCLITestCase.test_auth_on_off_delayed]
ERROR: test_bfd.BFDCLITestCase.test_set_del_meticulous_sha1_key [test_bfd.BFDCLITestCase.test_set_del_meticulous_sha1_key]
ERROR: test_bfd.BFDCLITestCase.test_set_del_sha1_key [test_bfd.BFDCLITestCase.test_set_del_sha1_key]
ERROR: test_bfd.BFDCLITestCase.test_set_del_udp_echo_source [test_bfd.BFDCLITestCase.test_set_del_udp_echo_source]
ERROR: test_bfd.BFDCLITestCase.test_show [test_bfd.BFDCLITestCase.test_show]
Testcase name: VAPI test
ERROR: test_vapi.VAPITestCase.test_vapi_c [test_vapi.VAPITestCase.test_vapi_c]
Testcase name: Container integration extended testcases
ERROR: test_container.ContainerIntegrationTestCase.test_0010_basic_conn_test [test_container.ContainerIntegrationTestCase.test_0010_basic_conn_test]
ERROR: test_container.ContainerIntegrationTestCase.test_0011_basic_conn_test [test_container.ContainerIntegrationTestCase.test_0011_basic_conn_test]
ERROR: test_container.ContainerIntegrationTestCase.test_0050_loopback_prepare_test [test_container.ContainerIntegrationTestCase.test_0050_loopback_prepare_test]
ERROR: test_container.ContainerIntegrationTestCase.test_0110_basic_conn_test [test_container.ContainerIntegrationTestCase.test_0110_basic_conn_test]
ERROR: test_container.ContainerIntegrationTestCase.test_0111_basic_conn_test [test_container.ContainerIntegrationTestCase.test_0111_basic_conn_test]
ERROR: test_container.ContainerIntegrationTestCase.test_0200_basic_conn_test [test_container.ContainerIntegrationTestCase.test_0200_basic_conn_test]
ERROR: test_container.ContainerIntegrationTestCase.test_0210_basic_conn_test [test_container.ContainerIntegrationTestCase.test_0210_basic_conn_test]
ERROR: test_container.ContainerIntegrationTestCase.test_0211_basic_conn_test [test_container.ContainerIntegrationTestCase.test_0211_basic_conn_test]
ERROR: test_container.ContainerIntegrationTestCase.test_0300_unconfigure_commands [test_container.ContainerIntegrationTestCase.test_0300_unconfigure_commands]
ERROR: test_container.ContainerIntegrationTestCase.test_0410_spoof_test [test_container.ContainerIntegrationTestCase.test_0410_spoof_test]
ERROR: test_container.ContainerIntegrationTestCase.test_0411_spoof_test [test_container.ContainerIntegrationTestCase.test_0411_spoof_test]
Testcase name: Re-enable IPFIX
ERROR: test_flowprobe.ReenableIPFIX.test_0011 [test_flowprobe.ReenableIPFIX.test_0011]
Testcase name: VXLAN over IPv6 Test Case
ERROR: setUpClass [setUpClass (test_vxlan6.TestVxlan6)]
Testcase name: JVPP Core Test Case
ERROR: test_jvpp.TestJVpp.test_vpp_acl_callback_api [test_jvpp.TestJVpp.test_vpp_acl_callback_api]
ERROR: test_jvpp.TestJVpp.test_vpp_acl_future_api [test_jvpp.TestJVpp.test_vpp_acl_future_api]
ERROR: test_jvpp.TestJVpp.test_vpp_core_callback_api [test_jvpp.TestJVpp.test_vpp_core_callback_api]
ERROR: test_jvpp.TestJVpp.test_vpp_core_future_api [test_jvpp.TestJVpp.test_vpp_core_future_api]
ERROR: test_jvpp.TestJVpp.test_vpp_ioamexport_callback_api [test_jvpp.TestJVpp.test_vpp_ioamexport_callback_api]
ERROR: test_jvpp.TestJVpp.test_vpp_ioamexport_future_api [test_jvpp.TestJVpp.test_vpp_ioamexport_future_api]
ERROR: test_jvpp.TestJVpp.test_vpp_ioampot_callback_api [test_jvpp.TestJVpp.test_vpp_ioampot_callback_api]
ERROR: test_jvpp.TestJVpp.test_vpp_ioampot_future_api [test_jvpp.TestJVpp.test_vpp_ioampot_future_api]
ERROR: test_jvpp.TestJVpp.test_vpp_ioamtrace_callback_api [test_jvpp.TestJVpp.test_vpp_ioamtrace_callback_api]
ERROR: test_jvpp.TestJVpp.test_vpp_ioamtrace_future_api [test_jvpp.TestJVpp.test_vpp_ioamtrace_future_api]
ERROR: test_jvpp.TestJVpp.test_vpp_snat_callback_api [test_jvpp.TestJVpp.test_vpp_snat_callback_api]
ERROR: test_jvpp.TestJVpp.test_vpp_snat_future_api [test_jvpp.TestJVpp.test_vpp_snat_future_api]
Testcase name: LDP Cut Thru Tests
FAILURE: test_vcl.LDPCutThruTestCase.test_ldp_cut_thru_iperf3 [test_vcl.LDPCutThruTestCase.test_ldp_cut_thru_iperf3]
Testcase name: ACL plugin connection-oriented extended testcases
ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_0000_conn_prepare_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_0000_conn_prepare_test]
ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_0001_basic_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_0001_basic_conn_test]
ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_0002_basic_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_0002_basic_conn_test]
ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_0005_clear_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_0005_clear_conn_test]
ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_0006_clear_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_0006_clear_conn_test]
ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_0011_active_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_0011_active_conn_test]
ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_0012_active_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_0012_active_conn_test]
ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_1001_basic_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_1001_basic_conn_test]
ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_1002_basic_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_1002_basic_conn_test]
ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_1005_clear_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_1005_clear_conn_test]
ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_1006_clear_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_1006_clear_conn_test]
ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_1011_active_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_1011_active_conn_test]
ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_1012_active_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_1012_active_conn_test]
ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_2000_prepare_for_tcp_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_2000_prepare_for_tcp_test]
ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_2001_tcp_transient_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_2001_tcp_transient_conn_test]
ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_2002_tcp_transient_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_2002_tcp_transient_conn_test]
ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_2003_tcp_transient_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_2003_tcp_transient_conn_test]
ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_2004_tcp_transient_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_2004_tcp_transient_conn_test]
ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_2005_tcp_transient_teardown_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_2005_tcp_transient_teardown_conn_test]
ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_2006_tcp_transient_teardown_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_2006_tcp_transient_teardown_conn_test]
ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_3001_tcp_transient_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_3001_tcp_transient_conn_test]
ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_3002_tcp_transient_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_3002_tcp_transient_conn_test]
ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_3003_tcp_transient_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_3003_tcp_transient_conn_test]
ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_3004_tcp_transient_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_3004_tcp_transient_conn_test]
ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_3005_tcp_transient_teardown_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_3005_tcp_transient_teardown_conn_test]
ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_3006_tcp_transient_teardown_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_3006_tcp_transient_teardown_conn_test]
Testcase name: LDP Thru Host Stack Echo
FAILURE: test_vcl.LDPThruHostStackEcho.test_ldp_thru_host_stack_echo [test_vcl.LDPThruHostStackEcho.test_ldp_thru_host_stack_echo]
Testcase name: Bidirectional Forwarding Detection (BFD) - API
ERROR: test_bfd.BFDAPITestCase.test_activate_auth [test_bfd.BFDAPITestCase.test_activate_auth]
ERROR: test_bfd.BFDAPITestCase.test_add_auth_nonexistent_key [test_bfd.BFDAPITestCase.test_add_auth_nonexistent_key]
ERROR: test_bfd.BFDAPITestCase.test_add_bfd [test_bfd.BFDAPITestCase.test_add_bfd]
ERROR: test_bfd.BFDAPITestCase.test_add_bfd6 [test_bfd.BFDAPITestCase.test_add_bfd6]
ERROR: test_bfd.BFDAPITestCase.test_add_bfd_sha1 [test_bfd.BFDAPITestCase.test_add_bfd_sha1]
ERROR: test_bfd.BFDAPITestCase.test_add_sha1_keys [test_bfd.BFDAPITestCase.test_add_sha1_keys]
ERROR: test_bfd.BFDAPITestCase.test_change_key [test_bfd.BFDAPITestCase.test_change_key]
ERROR: test_bfd.BFDAPITestCase.test_deactivate_auth [test_bfd.BFDAPITestCase.test_deactivate_auth]
ERROR: test_bfd.BFDAPITestCase.test_double_add [test_bfd.BFDAPITestCase.test_double_add]
ERROR: test_bfd.BFDAPITestCase.test_double_add_sha1 [test_bfd.BFDAPITestCase.test_double_add_sha1]
ERROR: test_bfd.BFDAPITestCase.test_mod_bfd [test_bfd.BFDAPITestCase.test_mod_bfd]
ERROR: test_bfd.BFDAPITestCase.test_set_del_udp_echo_source [test_bfd.BFDAPITestCase.test_set_del_udp_echo_source]
ERROR: test_bfd.BFDAPITestCase.test_shared_sha1_key [test_bfd.BFDAPITestCase.test_shared_sha1_key]
Testcase name: LDP Thru Host Stack Iperf
FAILURE: test_vcl.LDPThruHostStackIperf.test_ldp_thru_host_stack_iperf3 [test_vcl.LDPThruHostStackIperf.test_ldp_thru_host_stack_iperf3]
Testcase name: Bidirectional Forwarding Detection (BFD) (SHA1 auth)
ERROR: test_bfd.BFDSHA1TestCase.test_session_up [test_bfd.BFDSHA1TestCase.test_session_up]
Testcase name: Punt Socket for IPv6
ERROR: test_punt.TestIP6PuntSocket.test_punt_socket_dump [test_punt.TestIP6PuntSocket.test_punt_socket_dump]
ERROR: test_punt.TestIP6PuntSocket.test_punt_socket_traffic_multi_port_multi_sockets [test_punt.TestIP6PuntSocket.test_punt_socket_traffic_multi_port_multi_sockets]
ERROR: test_punt.TestIP6PuntSocket.test_punt_socket_traffic_multi_ports_single_socket [test_punt.TestIP6PuntSocket.test_punt_socket_traffic_multi_ports_single_socket]
ERROR: test_punt.TestIP6PuntSocket.test_punt_socket_traffic_single_port_single_socket [test_punt.TestIP6PuntSocket.test_punt_socket_traffic_single_port_single_socket]
Testcase name: Disable Flowprobe feature
ERROR: test_flowprobe.DisableFP.test_0001 [test_flowprobe.DisableFP.test_0001]
Testcase name: Disable IPFIX
ERROR: test_flowprobe.DisableIPFIX.test_0001 [test_flowprobe.DisableIPFIX.test_0001]
Testcase name: VPP Object Model Test
ERROR: test_vom.VOMTestCase.test_vom_cpp [test_vom.VOMTestCase.test_vom_cpp]
Testcase name: BFD-FIB interactions (IPv6)
ERROR: test_bfd.BFDFIBTestCase.test_session_with_fib [test_bfd.BFDFIBTestCase.test_session_with_fib]
Testcase name: Bidirectional Forwarding Detection (BFD)
ERROR: test_bfd.BFD4TestCase.test_echo [test_bfd.BFD4TestCase.test_echo]
ERROR: test_bfd.BFD4TestCase.test_echo_looped_back [test_bfd.BFD4TestCase.test_echo_looped_back]
ERROR: test_bfd.BFD4TestCase.test_intf_deleted [test_bfd.BFD4TestCase.test_intf_deleted]
ERROR: test_bfd.BFD4TestCase.test_session_down [test_bfd.BFD4TestCase.test_session_down]
ERROR: test_bfd.BFD4TestCase.test_session_up [test_bfd.BFD4TestCase.test_session_up]
ERROR: test_bfd.BFD4TestCase.test_session_up_by_ip [test_bfd.BFD4TestCase.test_session_up_by_ip]
Testcase name: VXLAN-GPE Test Case
ERROR: test_vxlan_gpe.TestVxlanGpe.test_decap [test_vxlan_gpe.TestVxlanGpe.test_decap]
ERROR: test_vxlan_gpe.TestVxlanGpe.test_encap [test_vxlan_gpe.TestVxlanGpe.test_encap]
ERROR: test_vxlan_gpe.TestVxlanGpe.test_ucast_flood [test_vxlan_gpe.TestVxlanGpe.test_ucast_flood]
Testcase name: Re-enable Flowprobe feature
ERROR: test_flowprobe.ReenableFP.test_0001 [test_flowprobe.ReenableFP.test_0001]
Testcase name: LDP IPv6 Cut Thru Tests
FAILURE: test_vcl.LDPIpv6CutThruTestCase.test_ldp_ipv6_cut_thru_echo [test_vcl.LDPIpv6CutThruTestCase.test_ldp_ipv6_cut_thru_echo]
TESTCASES WHERE NO TESTS WERE SUCCESSFULLY EXECUTED:
VXLAN over IPv6 Test Case
==============================================================================
0 attempt(s) left.
Change-Id: Id202ed6ee7f57670f34ec87380244c568b509416
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Paul Vinciguerra [Wed, 9 Jan 2019 04:37:40 +0000 (20:37 -0800)]
Fix inheritance problem in test/hook.py.
Subclasses cannot modify the signature of their constructors.
def __init__(self, test):
- super(PollHook, self).__init__(test.logger)
+ super(PollHook, self).__init__(test)
Change-Id: I764df8871128f9198a03fac4ec2f45528547467a
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Kingwel Xie [Mon, 4 Feb 2019 10:07:06 +0000 (02:07 -0800)]
ipsec: cli 'create ipsec tunnel' more options
use-esp use-anti-replay
Change-Id: I977b65eee926adaded0cb923e14feb0ee90fc32c
Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
Dave Barach [Sun, 3 Feb 2019 15:44:47 +0000 (10:44 -0500)]
Automated anomaly detection
Compute per-track mean, variance, and n*stddev stats for the first u32
datum in each instance of the supplied event.
Search for the next instance of the indicated event which has a datum
larger than mean + n*stddev.
This turns out to be a very effective "Nixon Gap" finder when the
selected event datum is the instantaneous vector size. Such traces can
be easily captured from production vpp images.
Change-Id: I876843cb2ece22f902720704ce4568d4e1173e01
Signed-off-by: Dave Barach <dave@barachs.net>
Dave Barach [Sat, 2 Feb 2019 19:33:08 +0000 (14:33 -0500)]
Disable hqos part deux
Change-Id: Ieab56e0a20696b8cc97f783f08f10a94a83644eb
Signed-off-by: Dave Barach <dave@barachs.net>
Damjan Marion [Sat, 2 Feb 2019 15:28:16 +0000 (16:28 +0100)]
dpdk: bump to dpdk 19.02
HQoS requires fixes to work with dpdk 19.02 so code is disabled and
pending deprecation unless active maintainer is found.
Change-Id: I3569c4287b6dfdd2c29e02375eb53bf01fa6ae84
Signed-off-by: Damjan Marion <damarion@cisco.com>
Steven Luong [Tue, 29 Jan 2019 23:13:31 +0000 (15:13 -0800)]
vmxnet3: multiple TX queues support
Add num-tx-queues to the vmxnet3 create CLI/API. Default is 1. Max is
min (8, the number of cores assigned to VPP).
Change-Id: I7e0a659a82d01c719665c228dd8a71e3288a2895
Signed-off-by: Steven Luong <sluong@cisco.com>
Dave Barach [Fri, 1 Feb 2019 00:12:51 +0000 (19:12 -0500)]
CLI control of graph dispatch elogs
Change-Id: I195c8eabc0ee67880f1e85fc7594b00be6b563e3
Signed-off-by: Dave Barach <dave@barachs.net>
Florin Coras [Sat, 2 Feb 2019 02:00:05 +0000 (18:00 -0800)]
session: improve show session cli
Change-Id: If30cea80058752cedcc6ecc38e90bef8732c83d3
Signed-off-by: Florin Coras <fcoras@cisco.com>
Paul Vinciguerra [Sat, 2 Feb 2019 03:37:45 +0000 (19:37 -0800)]
Python3: Move vppapigen to python3.
Change-Id: I26846d0c12211a29ccfca7c269b9094f6fdbd95c
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Damjan Marion [Fri, 1 Feb 2019 23:15:27 +0000 (00:15 +0100)]
Deprecate old mutliarch code, phase 1
It is causing compilation sloness with gcc-7 so removing it
before it was originally planned.
So far macros are left in the tree so we can know which nodes to
convert to new multiarch code.
Change-Id: Idb14622ca61fdce1eba59723b20d98715b7971e6
Signed-off-by: Damjan Marion <damarion@cisco.com>
Ole Troan [Wed, 30 Jan 2019 18:01:49 +0000 (19:01 +0100)]
VPP-1543: show map stats crash when not configured.
Change-Id: I4c8bc3fb057d57339ce282a31b0bb70ad16dd03e
Signed-off-by: Ole Troan <ot@cisco.com>
Florin Coras [Fri, 1 Feb 2019 01:31:01 +0000 (17:31 -0800)]
tcp: remove internal buffer cache
Change-Id: I3051d49aa9b9c38dcd8069ea1748f74ab20ac0f6
Signed-off-by: Florin Coras <fcoras@cisco.com>
Florin Coras [Thu, 31 Jan 2019 22:35:50 +0000 (14:35 -0800)]
session: remove local buffer cache
Change-Id: I71ccb39c56962fe0160d3f4c83453e72d2dd3030
Signed-off-by: Florin Coras <fcoras@cisco.com>
Neale Ranns [Fri, 1 Feb 2019 11:31:24 +0000 (03:31 -0800)]
IPSEC: minor refactor
No function change. Only breaking the monster ipsec.[hc]
into smaller constituent parts
Change-Id: I3fd4d2d041673db5865d46a4002f6bd383f378af
Signed-off-by: Neale Ranns <nranns@cisco.com>
Damjan Marion [Fri, 1 Feb 2019 13:59:39 +0000 (14:59 +0100)]
Remove -z now from LDFLAGS
It significantly increases link time, and slows down VPP startup.
Change-Id: I200448212a3254b1292d4e52d2751214240e2bc4
Signed-off-by: Damjan Marion <damarion@cisco.com>
Damjan Marion [Thu, 31 Jan 2019 14:36:47 +0000 (15:36 +0100)]
memif: fix buffer prefetch
Change-Id: If514366be7385c64cafc03329f66b44380556daa
Signed-off-by: Damjan Marion <damarion@cisco.com>
Paul Vinciguerra [Tue, 29 Jan 2019 19:51:44 +0000 (11:51 -0800)]
VTL: Fix issue with ipaddress library use under python2.
If you pass in a non-unicode 4-byte ipv6 address to ip_address,
ipaddress interprets this as an IPv4Address.
Under python2, ip_address interprets 'a7::' as a packed ipv4:
97.55.58.58
You can test with:
---
import ipaddress
try:
text_type = unicode
except NameError:
text_type = str
addr = ipaddress.ip_address('a7::')
print(addr)
---
Change-Id: I06c561e0ab7315869cc89d0bb08c05e743a90982
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Damjan Marion [Thu, 31 Jan 2019 17:50:04 +0000 (18:50 +0100)]
buffers: vallidate that buffer is allocated during buffer pool put
Change-Id: I8044b34a37fe1994a8dfa1ca89929f3642c72e8d
Signed-off-by: Damjan Marion <damarion@cisco.com>
Klement Sekera [Tue, 29 Jan 2019 10:49:09 +0000 (11:49 +0100)]
make test: fix logging
Change-Id: I3867d50746f0f424c8e94929171363e5b2e4d470
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Benoît Ganne [Mon, 21 Jan 2019 16:41:25 +0000 (17:41 +0100)]
Add 'show vlib graphviz' command
Add a new command to dump vlib graph as graphviz/dot file
Change-Id: I43fc072cff8153ac500e5fbc6641a3705c2e995e
Signed-off-by: Benoît Ganne <bganne@cisco.com>
Sergio Gonzalez Monroy [Wed, 30 Jan 2019 10:26:00 +0000 (11:26 +0100)]
dpdk-ipsec: use single queue pair per crypto resource
Change-Id: I2c796583087c70fbc5cf09e8afd0f2a1f389d346
Signed-off-by: Sergio Gonzalez Monroy <sgmonroy@gmail.com>
Damjan Marion [Thu, 31 Jan 2019 21:12:19 +0000 (22:12 +0100)]
dpdk: populate mempool mem_list
Mellanox driver needs it
Change-Id: I28423805f977089d18d32e85cf08e9e7e1fcf5b2
Signed-off-by: Damjan Marion <damarion@cisco.com>
Damjan Marion [Thu, 31 Jan 2019 20:01:35 +0000 (21:01 +0100)]
dpdk: store buffer poool index in mempool pool_id
Change-Id: I2c225a4932dcf326e10fe93de3ee4fdaef4dd3d0
Signed-off-by: Damjan Marion <damarion@cisco.com>
Neale Ranns [Thu, 10 Jan 2019 05:22:20 +0000 (21:22 -0800)]
IPSEC: API modernisation
- use enums to enumerate the algoritms and protocols that are supported
- use address_t types to simplify encode/deocde
- use typedefs of entry objects to get consistency between add/del API and dump
Change-Id: I7e7c58c06a150e2439633ba9dca58bc1049677ee
Signed-off-by: Neale Ranns <nranns@cisco.com>
Florin Coras [Wed, 30 Jan 2019 04:11:58 +0000 (20:11 -0800)]
vcl: improve handling of close on rw
Change-Id: Ie01a37612d7e3e0d0bad0f0aa9583b3ed411f46f
Signed-off-by: Florin Coras <fcoras@cisco.com>
jdenisco [Wed, 30 Jan 2019 15:43:43 +0000 (10:43 -0500)]
docs: Instructions for using vmxnet3 on mac
Change-Id: Ie6770e3a3801a23a6eb64cf1699ef0018eab6445
Signed-off-by: jdenisco <jdenisco@cisco.com>
Andrew Yourtchenko [Mon, 21 Jan 2019 15:50:47 +0000 (16:50 +0100)]
Update version (19.01) for API changes script
Change-Id: I9c39b5076d366b3455a875df32765b2cb8f3eca2
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
(cherry picked from commit
02da3a792ce1a7b4cdc3f0c9aa3434aadc726d06)
Paul Vinciguerra [Thu, 24 Jan 2019 02:16:08 +0000 (18:16 -0800)]
VTL: Makefile: Don't install pip twice.
Pip is installed via virtualenv. No need to reinstall it again.
Change-Id: I45bea1f9db841ca4309b763ab852623180937727
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Damjan Marion [Thu, 31 Jan 2019 18:41:50 +0000 (19:41 +0100)]
extras: vfctl script - bind VF to vfio-pci after VF is created
Change-Id: If6ed71a5f7217363d8e1b2f7a7f20fe4cfdb58af
Signed-off-by: Damjan Marion <damarion@cisco.com>
Klement Sekera [Wed, 30 Jan 2019 17:29:28 +0000 (18:29 +0100)]
assert on double-free in debug build
The assert allows easier debugging in gdb by aborting instead of exiting
cleanly. Also a core is generated so a stack trace can be obtained.
Change-Id: I2d05488c4522f4d4570fdfe0283130eb4c853d2a
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Mohsin Kazmi [Fri, 25 Jan 2019 15:57:24 +0000 (15:57 +0000)]
pci: get the number of interrupts
Change-Id: I2cfb81b3c8809d027a3ee5f5f570668e60be08ef
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Damjan Marion [Thu, 31 Jan 2019 11:29:39 +0000 (12:29 +0100)]
buffers: reinitialize metadata, add additional validation
- DPDK overwrites metadata as part of rte_pktmbuf_init(...) so we need
reinitialize it
- additional checks added to ensure ref_count is never < 1
Change-Id: Ida336f81c4723e8f2e0ad4a70cb7b1ecfff978a0
Signed-off-by: Damjan Marion <damarion@cisco.com>
Neale Ranns [Fri, 25 Jan 2019 14:37:15 +0000 (06:37 -0800)]
DHCP-test: more robust sleep check
Change-Id: I48c382797239dc305e01cc35124140d6ce16149a
Signed-off-by: Neale Ranns <nranns@cisco.com>
Damjan Marion [Wed, 30 Jan 2019 21:15:28 +0000 (22:15 +0100)]
buffers: add missing ref_count = 1 in drivers
Change-Id: I6aa030429c1740f7376e95daf82fce49efa6716b
Signed-off-by: Damjan Marion <damarion@cisco.com>
Mohsin Kazmi [Wed, 30 Jan 2019 13:36:57 +0000 (13:36 +0000)]
virtio: fix the device order (legacy or modern)
Change-Id: I60f88d50f062b004e6dea487bd627d303d0a5e75
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Neale Ranns [Fri, 10 Aug 2018 12:30:06 +0000 (05:30 -0700)]
Use IP and MAC API types for neighbors
use address_t and mac_address_t for IPv6 and ARP entries
and all other API calls in ip.api aprat from the route ones,
that will follow in a separate commit
Change-Id: I67161737c2184d3f8fc1e79ebd2b55121c5b0191
Signed-off-by: Neale Ranns <nranns@cisco.com>
Neale Ranns [Wed, 30 Jan 2019 14:00:19 +0000 (06:00 -0800)]
MPLS tunnel; fix crash when deleting non-existant path
in the case the tunnel is the only user of the shared path list
then removing its dependency removes the path list. hence lock the list
Change-Id: I18318441698ceac16715b1826266a7d19dcd76e1
Signed-off-by: Neale Ranns <nranns@cisco.com>
Damjan Marion [Mon, 21 Jan 2019 10:48:34 +0000 (11:48 +0100)]
buffers: major cleanup and improvements
This patch introduces following changes:
- deprecated free lists which are not used and not compatible
with external buffer managers (i.e. DPDK)
- introduces native support for per-numa buffer pools
- significantly improves performance of buffer alloc and free
Change-Id: I4a8e723ae47056717afd6cac0efe87cb731b5be7
Signed-off-by: Damjan Marion <damarion@cisco.com>
Klement Sekera [Wed, 30 Jan 2019 10:11:23 +0000 (11:11 +0100)]
ipsec: fix check support functions
Change-Id: If94c57fbb07a7376a9f2873e1489c00b28152620
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Florin Coras [Mon, 28 Jan 2019 23:54:27 +0000 (15:54 -0800)]
vls: support passive listeners
If an application worker calls listen on a session, vpp registers the
worker to the listener's work load balance group and, as new connections
are accepted, it may potentially push accept notifications to it.
There are however applications, like nginx, that on some workers may
never accept new connections on a session they've started listening on.
To avoid accumulating accept events on such workers, this patch adds
support for passive listeners. That is, workers that have started
listening on a session but then never call accept or epoll/select on
that listener.
Change-Id: I007e6dcb54fc88a0e3aab3c6e2a3d1ef135cbd58
Signed-off-by: Florin Coras <fcoras@cisco.com>
Florin Coras [Wed, 30 Jan 2019 01:30:29 +0000 (17:30 -0800)]
lisp: set reachable flag in map-register
Change-Id: I9faaa321113e435844931247f23dbc1d190cc9da
Signed-off-by: Florin Coras <fcoras@cisco.com>
Florin Coras [Wed, 30 Jan 2019 05:28:16 +0000 (21:28 -0800)]
ldp: initialize clib time
Change-Id: Ie598443f024a677a9c6938b3f3634960fd712b09
Signed-off-by: Florin Coras <fcoras@cisco.com>
Ed Kern [Tue, 29 Jan 2019 21:28:05 +0000 (14:28 -0700)]
test_syslog.py: pep8 overtab
nit tab fix for pep8
Change-Id: I81f62bf5f547497c9aabfb3180ef24f50b7c3283
Signed-off-by: Ed Kern <ejk@cisco.com>
Paul Vinciguerra [Tue, 29 Jan 2019 20:27:16 +0000 (12:27 -0800)]
VTL: Fix pep8 test/test_syslog.py
Change-Id: I8894a7a8f2be117a4c1cec9ce5134a1572da7ec7
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Mohsin Kazmi [Mon, 28 Jan 2019 19:30:21 +0000 (19:30 +0000)]
virtio: Support legacy and transitional virtio devices
Change-Id: Ib1316482dd7b1ae3c27c7eeb55839ed8af9ca162
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Florin Coras [Fri, 18 Jan 2019 16:37:13 +0000 (08:37 -0800)]
vls: multi-process and multi-threaded apps improvements
- More fine tuning for multi-process applications.
- Experimental support for multi-thread apps. This is meant for app
whose threads are not vcl workers and the sessions are shared between
them.
Change-Id: Ie07651da5f2cdcf39f5dead5431f50ad39cf3f74
Signed-off-by: Florin Coras <fcoras@cisco.com>
Dmitry Vakhrushev [Mon, 28 Jan 2019 22:34:22 +0000 (17:34 -0500)]
Fix error while compiling using 'vlib/vlib.h' dependencie.
This variable without any needed 'define' becoming unused.
Change-Id: I661a75a78dba03abb861ed918ad1e634a8ecd0af
Signed-off-by: Dmitry Vakhrushev <dmitry@netgate.com>
Klement Sekera [Tue, 29 Jan 2019 10:38:08 +0000 (11:38 +0100)]
make test: remove generic imports
Change-Id: I55b89f0d9fb082c7763b64b09ab14573468c6704
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Damjan Marion [Mon, 28 Jan 2019 16:55:59 +0000 (17:55 +0100)]
cmake: fix out-of-git-tree build
Change-Id: Ib94637ec09799c23f3179599b54a2be6e2768425
Signed-off-by: Damjan Marion <damarion@cisco.com>
Ping Yu [Mon, 28 Jan 2019 08:12:08 +0000 (03:12 -0500)]
update openssl TLS async to align with openssl master branch
Need to align with 3.0.0 version
Change-Id: I4e8aec1f1226ce09963a9bbb3a9170d1863059ec
Signed-off-by: Ping Yu <ping.yu@intel.com>
Dmitry Vakhrushev [Tue, 22 Jan 2019 10:28:53 +0000 (05:28 -0500)]
Fix issues with order of NAT commands before set VRF table on an interface
Outside FIB index doesn't change in this case. We register
callback for changing of outside FIB if table binding is changed
on an interface.
Change-Id: I1ebbd7c3c547fc999089db07abd2019734395a6e
Signed-off-by: Dmitry Vakhrushev <dmitry@netgate.com>
Ping Yu [Mon, 28 Jan 2019 08:27:51 +0000 (03:27 -0500)]
Add Ipsec IKE support to openssl 3.0.0 master branch
Change-Id: I7bd43f57d23b1ecf031530c4a7508f949ddf616f
Signed-off-by: Ping Yu <ping.yu@intel.com>
Damjan Marion [Mon, 28 Jan 2019 12:41:27 +0000 (13:41 +0100)]
Less intrusive way to capture numa_node and cpu_id changes
Change-Id: I3a33fb81f31ed473811e9e7a6197b81135913865
Signed-off-by: Damjan Marion <damarion@cisco.com>
Damjan Marion [Sun, 27 Jan 2019 16:54:11 +0000 (17:54 +0100)]
Fix issue with cpu_id and numa_code captured too early
Change-Id: I79b213b34c6071d14acf1922f89037a4a5a36c45
Signed-off-by: Damjan Marion <damarion@cisco.com>
Florin Coras [Sat, 26 Jan 2019 22:33:26 +0000 (14:33 -0800)]
session: properly initialize accepted/connected msgs
Change-Id: I36b3ae56e6ca160081c892367fd6a979751fe717
Signed-off-by: Florin Coras <fcoras@cisco.com>
Dave Barach [Sat, 26 Jan 2019 14:50:26 +0000 (09:50 -0500)]
perfmon: collect data on selected thread(s)
Add missing pre-input node runtime fork and refork code.
unix-epoll-input runs on all threads; each instance needs its own
runtime stats.
Change-Id: I16b02e42d0c95f863161176c4bb9f9917bef809d
Signed-off-by: Dave Barach <dave@barachs.net>
Damjan Marion [Sat, 26 Jan 2019 17:50:29 +0000 (18:50 +0100)]
cmake: parse DPDK config without compilation
Previous scheme was not cross-compile friendly...
Change-Id: Ib103b136231673157a02b8750312aa6073052c7e
Signed-off-by: Damjan Marion <damarion@cisco.com>
Burt Silverman [Wed, 23 Jan 2019 02:55:02 +0000 (21:55 -0500)]
Run vpp-configure on change to cmake config files.
Modify the dirs assignment in configure_check_timestamp to
add the build-data/platforms/$(PLATFORM).mk file, all the CMakeLists.txt
files in the $(PACKAGE_SOURCE) tree, and the $(PACKAGE_SOURCE)/cmake
directory.
(For example, for package vpp, $(PACKAGE_SOURCE) is <Top of Tree>/src).
Note that in an earlier era there was no build-data/platforms directory and
no CMakeLists.txt files.
Also, we tacitly assume that $(SOURCE_PATH_BUILD_DATA_DIRS) is only one
directory whereas ebuild has been used in environments where there are two
treetops.
Change-Id: I761219adbdb4c7e675bb12b3e7f052db68f0294c
Signed-off-by: Burt Silverman <burtms@gmail.com>
Florin Coras [Fri, 25 Jan 2019 21:19:56 +0000 (13:19 -0800)]
vcl: add api to expose worker message queues epfd
This only works if vcl is configured to do eventd based message queue
notifications, instead of condvars. For that, add "use-mq-eventfd" to
vcl startup conf.
Change-Id: Id0f0288a40ec7d3daef7370f8b88420425867ab6
Signed-off-by: Florin Coras <fcoras@cisco.com>
Damjan Marion [Sat, 26 Jan 2019 13:12:25 +0000 (14:12 +0100)]
cmake: add support for linking with DPDK shared libs
Change-Id: I3423191c53ab6100ee9ecc4e24b06506ff1b25c8
Signed-off-by: Damjan Marion <damarion@cisco.com>
Damjan Marion [Fri, 25 Jan 2019 07:39:04 +0000 (08:39 +0100)]
deprecate tapcli
Change-Id: I82dceaa27a7b0c96de077cf283e4f64aa426f271
Signed-off-by: Damjan Marion <damarion@cisco.com>
Neale Ranns [Fri, 25 Jan 2019 11:18:27 +0000 (03:18 -0800)]
MPLS-tunnel: show output to display the tunnel name correctly
Change-Id: I1554d9a4d6e4a4007cda9d0f83b03feb8fdbe853
Signed-off-by: Neale Ranns <nranns@cisco.com>
Neale Ranns [Thu, 24 Jan 2019 12:52:25 +0000 (04:52 -0800)]
IPSEC: tests use opbject registry
this means we test the dumps - to some extent
Change-Id: I8d90745701012012b41a7b3aaf9be97b4dd2bdf8
Signed-off-by: Neale Ranns <nranns@cisco.com>
Florin Coras [Fri, 25 Jan 2019 07:22:37 +0000 (23:22 -0800)]
tcp_echo: support all ctrl msgs and io cleanup
Change-Id: I74d69b8d686ad2395267eaee38cf3a7efc76d127
Signed-off-by: Florin Coras <fcoras@cisco.com>
Kingwel Xie [Thu, 24 Jan 2019 08:24:26 +0000 (03:24 -0500)]
pg: bugfix for pg paylod hdr-size
it was specified to 0 after https://gerrit.fd.io/r/16909
causes unformat_pg_ip4_header to wrongly set ip header len.
do more check when assigning e->lsb_bit_offset to avoid
negative value
Change-Id: Ib772c7135cdeb355f0d60f1ee11602f6b5a0ff21
Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
Neale Ranns [Fri, 25 Jan 2019 08:51:09 +0000 (00:51 -0800)]
IP6 FIB: walk table for dump (VPP-1553)
Change-Id: Iaa57ace6df96bfacd1235c80ec7bb08e5f335530
Signed-off-by: Neale Ranns <nranns@cisco.com>
Damjan Marion [Fri, 25 Jan 2019 10:22:58 +0000 (11:22 +0100)]
cmake: execute git from src directory
Thanks Eliot....
Change-Id: I19c9557bf827d4a5b2af344f6f4eedf25cda86d7
Signed-off-by: Damjan Marion <damarion@cisco.com>