fix(trex): do not match substring

Fixes: d78103b24d3bd68f3bd390fa527924bbb1019a23

Change-Id: I098752553ed34c6fef0cf4eed61662b78c8fd97c
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

feat(ietf): Prepare for MLRsearch draft-08

Change-Id: I882e7068b1dad4547356a497353abc9dc30abffd
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

fix(bootstrap): Go install with sudo

Signed-off-by: pmikus <peter.mikus@protonmail.ch>
Change-Id: I0869ee6629916025b1df603072dfa7ccae62110a

fix(bootstrap): Hugo init with go install

Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: Iadd4851ab4a7fc366ddffbace6ce7b47776fceeb

feat(bootstrap): Add Noble and Hugo

Signed-off-by: pmikus <peter.mikus@protonmail.ch>
Change-Id: Ib8f34293a984b63437884440d3244c177d757bc4

feat(trex): External configuration

Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: Ic566c755ba375173aa129f377f31e726d42a666e

fix(ip4scale6): 6 TRex ports means 6 traffic directions

Without this, Robot computes from single-port load incorrectly.

Change-Id: I4c83e959c64be1e7d2dd557db20b95be1ce3d0ae
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

fix(tox): Upgrade tox versions and dependencies

Tox job started failing on pip issues.

Change-Id: I198bfee3d9398c6b1e6ace4dec730e1333b14dbd
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

fix(core): Requirements bump

Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: I123295851d6d8a8bdfcf8fd0d3e68de8aad38965

feat(report): Finalize RCA edits to release notes

Change-Id: I4155d027e8a991a9857d1dd8703c5c28726ec4be
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

Update VPP_STABLE_VER files

Change-Id: Idd05f08c8d1af014676405d62f8c44a187339ee6
Signed-off-by: Tibor Frank <tifrank@cisco.com>

fix(papi): do not check client in async

This is primarily to avoid excessive logging
in scenarios with multiple get_replies (not just .add) per session.

Change-Id: Ic5b1c295965cd8d32c71a7851ec7823568483b06
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

fix(papi): Do not check CRC on None

None can happen when VPP crashes
(and pipe is not detected as broken yet) or stalls.
Avoid CRC check in that case, raise early with error message.

Change-Id: I15a957420320affd72dbd99fa48c309b28f0511a
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

fix(pip): Requirements for 24.04

Signed-off-by: pmikus <peter.mikus@protonmail.ch>
Change-Id: I7511fb128d81f5d91fb2cc0d71f193efaefd9f41

Update VPP_STABLE_VER files

Change-Id: Ifbb1a34ebae5d8f1759c112b496d24b084948e5f
Signed-off-by: Tibor Frank <tifrank@cisco.com>

feat(ebs): Install hugo if not found

Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: Ice4c09579a174c0ce3d26c8429016d55414bfb93

feat(bootstrap): Split gather.sh

Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: I8bf1fbf49d224b89f2da4a7f08bdf932cad9fd35

feat(ansible): env variables for nomad and vault

Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: I8a27c6ae832237947db6d28c052af0d15cac19a0

feat(job_specs): Update 1n-spr

Due to upgrade of ubuntu 24.04 the E810 stopped working.
To be investigated.

Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: Iee7ede4ba4377af114be7cce0a5e9c63865cd8dc

feat(infra): Ubuntu 24.04 LTS

Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: I7d672d07e6ed6bf6582888e8826bbc1cb6d94d17

fix(report): Update iterative failures in notes

Only VPP-2118 is really new.
Other "new" tickets are older issues,
either separated from similar symptoms,
or uncovered by recent CSIT suite edits.
Or reopened, when previous workarounds
did not reduce frequency enough.

- Not investigated which known iterative issues were fixed, yet.

Change-Id: Ic06c5ae80b933bfbc56c775d76be25dbcfa88a9e
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

feat(job_spec): vpp_device

Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: I0b2eeea045fe241129f978ec96eec5c0c5bc9938

feat(infra): Ubuntu 24.04 LTS

Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: Ib1f079f7fecb0c1f0f477bc565205165295202bd

feat(terraform): Update ETL

Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: I840cbc5a95e9af41af1811fc28db71e6b0d19d1e

Update VPP_STABLE_VER files

Change-Id: Ice8eb6ede5131bc82f11446884eeab4e58106636
Signed-off-by: Tibor Frank <tifrank@cisco.com>

feat(TGen): Include reason on TRex error

This adds noise to console output,
but prevents other possible bugs
from looking just like CSIT-1936.

Ticket: CSIT-1936

Change-Id: If30c59a96ebd9cec6aea40ca820b775d5f3548c6
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

fix(container): Remove obsolete LXC option

CSIT-1944

Change-Id: I0f763369acc560a5ab2d9db28fc25f20b1c5ffe7
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

feat(infra): Ubuntu 24.04 LTS

Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: I81e48360fcc970a16f1203955003d59f476b3233

C-Dash: Update python packages to the newest versions

Change-Id: Ieb8bcd85c1cede2ec203075f8dd3208ac3115110
Signed-off-by: Tibor Frank <tifrank@cisco.com>

Update requirements to the newest versions

Change-Id: I2eea5996c799e06cda73ab79ae2123867a913106
Signed-off-by: Tibor Frank <tifrank@cisco.com>

Update VPP_STABLE_VER files

Change-Id: Ica1c8da6ee01e27b1fa0673a46015bed34d1a106
Signed-off-by: Tibor Frank <tifrank@cisco.com>

feat(ietf): MLRsearch draft-07

+ date change 17jul to 18jul due to ietf submission tool reqs
+ .xml and .txt

Change-Id: I8b6fbba3a412ce41773b73592722905a9f361861
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>

fix(api): Remove support for old behaviors

The 2406 cycle did not upgrade any messages used by CSIT.
But there were few workarounds in CSIT code
to accomodate vehavior of older VPP builds.
Two removed.
One (re PAPI) stays, as that needs more testing.

Change-Id: I0595cf1d8b9d9ea80113f59130cbbdf00a249157
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

feat(ansible): Update calibration role

Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: If09928efb26066137014d3784efc6e6910d01143

C-Dash: Make extraction of topo-arch more flexible

Change-Id: I5f59a881d6c23c3e40054a6d829abdcbcafb966b
Signed-off-by: Tibor Frank <tifrank@cisco.com>

fix(bootstrap): External topologies read"

Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: Iefa96896004d8c9cc06df90f0a744c497b443106

feat(core): Change external testbed detection"

Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: Id005feac8104bb0b7da08d8dd9baaa3c5117e157

job-spec: Add imix and 1518B framesizes to ip4scale60k

Change-Id: I498540140965ecec70390e0b13c2418a31cf1dc8
Signed-off-by: Tibor Frank <tifrank@cisco.com>

Update VPP_STABLE_VER files

Change-Id: I201e10cf95a80777b0b4eafc50c96093c1f5c878
Signed-off-by: Tibor Frank <tifrank@cisco.com>

feat(report): Prepare 2406 known issues

- Few performance changes uncovered by edits to CSIT suites
  still need to be documented.

Change-Id: I2573d4719141fb8792a2a59171784761a87a6303
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

C-Docs: Modify URLs to examples in rls notes

Change-Id: Icb2ddf8bba494ee9290485c994bd100ab3e4ca70
Signed-off-by: Tibor Frank <tifrank@cisco.com>

Update VPP_STABLE_VER files

Change-Id: I119b41a8a81ccec3b025c5fc17f98d33e1a3290f
Signed-off-by: Tibor Frank <tifrank@cisco.com>

Update VPP_STABLE_VER files

Change-Id: I99a78bb03722048fb4c69a78f8cfbad2a50e6bb2
Signed-off-by: Tibor Frank <tifrank@cisco.com>

fix(core): VPP Initialisation issue on MLX.

Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: I2113e5e2067e13465ee1fedc6a2ba1c5bc1d7254

C-Dash: URLs to jobs and builds

Change-Id: I468c626e8f552d0cb4c35756f9f632f1f907fb0a
Signed-off-by: Tibor Frank <tifrank@cisco.com>

fix(core): typo

Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: I8ae87a8ee350cfe601a9deab2f115b75d26bd02a

feat(core): Add option to disable sriov check

Signed-off-by: pmikus <peter.mikus@protonmail.ch>
Change-Id: Ie8dbdf8b231dcbbbf2c90ad0f16d6b48fbdd8c5c

C-Dash: fix telemetry

Change-Id: Ic30b27e0defd91ab2fdc979569485d9f9a01e78b
Signed-off-by: Tibor Frank <tifrank@cisco.com>

C-Dash: fix in test job statistics

Change-Id: I290b3d01f578a2809cf3b89fe91faa51b6dc2522
Signed-off-by: Tibor Frank <tifrank@cisco.com>

Update VPP_STABLE_VER files

Change-Id: I1f3ef31ba276dfd4b0c9b1524939920aad9a3d79
Signed-off-by: Tibor Frank <tifrank@cisco.com>

C-Dash: Make possible to read data from only one parquet

Change-Id: Ifa72b520d6d0dbf9f39432f84a94ab93589a4079
Signed-off-by: Tibor Frank <tifrank@cisco.com>

feat(core): Adjust T-Rex for external topologies

Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: Id3f0a4a26404951bc7ce82655538b72848508e18

C-Dash: Add mrr trials to hover and detailed info

Change-Id: Ic26cd2aa726f16b3797c269b31e5ad127bbea5b2
Signed-off-by: Tibor Frank <tifrank@cisco.com>

fix(trex): Add MTU

Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: I91a3136a29192fb25ec4845e0924b96977f591f5

Update VPP_STABLE_VER files

Change-Id: I30ff178bda25342a0fd12e060c5e67ae889f2767
Signed-off-by: Tibor Frank <tifrank@cisco.com>

fix: Show mrr trials in trending graphs

Change-Id: If5003d4fb718dc1bf76cb6e049b00783e03de8bb
Signed-off-by: Tibor Frank <tifrank@cisco.com>

C-Dash: Show mrr trials in trending graphs

Change-Id: I5b983aa249dd5ac62f78e6f980ab81f270234b0f
Signed-off-by: Tibor Frank <tifrank@cisco.com>

feat(multi): Multiple VPP instances

Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: I28f2752f725c9816a557667033bf7d656fb0d414

feat(ansible): Repurpose obsolete vpp-device

Signed-off-by: pmikus <peter.mikus@protonmail.ch>
Change-Id: I95171ab59dfe1b5a98c36a839233d14e9ddb7ce5

Update VPP_STABLE_VER files

Change-Id: Id2535d02d103db58888dac7733d5aded1e7c5d78
Signed-off-by: Tibor Frank <tifrank@cisco.com>

feat(release): Update VPP release notes

+ List added and edited perf tests.
+ List new device NICs and tests on them.
 + Copy known device issues, even thougth new jobspecs avoid them.

Change-Id: I3e791c6d6395a4d9ac720fb0c9291464cf6d7395
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

fix(jobspec): IPsec HWasync has 1c, not 3c

Fixes: d29977e35bb15cd7df21c082432f03eab87e2e66

Change-Id: I1a20ded1181f5a3b33a0f6640554a939218d9791
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

C-Docs: Add env ver 15

Change-Id: I53d24a291907c862e2214e9152cede8f0ac05345
Signed-off-by: Tibor Frank <tifrank@cisco.com>

C-Dash: Add "hosts" to rls2406 iterative data

Change-Id: I038639ad010935d6144c79acb25e0e357beb3e96
Signed-off-by: Tibor Frank <tifrank@cisco.com>

fix(ipsec): Enable anti_replay for -ar- suites

The -ar- suites had everything edited,
except that one agrument that would actually enable anti-replay.

Fixes: b9dff484de0725bca3f65739519d952e3be55cbe

Change-Id: Ib2c590a9be5271348ee15d4e4ab1b7c663559477
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

Update VPP_STABLE_VER files

Change-Id: Ic7c09ffab66e7ccd604653ea26c35ceaffa65094
Signed-off-by: Tibor Frank <tifrank@cisco.com>

feat(jobspec): Add new new ipsec with UDP encap

+ Only for dpdk-plugin and primary NIC.
 + Prefer Intel, as that seems to have more stable performance.
+ Only one testcase per suite: 1518B 1c.
+ Add full set of 10k AES256GCM tests where not present already.
+ Remove multi-core ipsec AVF tests from 3n-icx to keep duration small.
 - Performance of those was limited by CSIT-1948 anyway.

Change-Id: I9166f15b44071dafe89ac8ca7982f659006027ba
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

feat(jobspec): Align weekly ndrpdr to daily mrr

+ This mainly uncomments a bucnh of 3n-alt xl710 ipsec tests.
+ Otherwise the difference was quite small.

Change-Id: I8b67fcce157f36ed79e9692a0581e1115b3f6886
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

feat(ipsec): Add suites for more algs

+ Add suite with UDP encap.
+ Add suite with anti replay enabled.
+ Add new enums where needed by the new suites.
+ Apply trimming in enum_util to support "3DES".
+ All 10ktnl suites written and tested.
 + New robot tags added.
+ Fix one comment from the parent.

Change-Id: I2581814dbb327891d8658dd009c4e52ffd318e3b
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

feat(jobspecs): Add more soak tests

+ Add l2xcbase.
+ Add 200k scale, both ip4 and ip6.
+ Test 200k and l2bdmaclearn also on:
 + Primary NIC with secondary driver.
 + Secondary NIC and its primary driver.
+ Add 1518B memif test cases, for 2n-spr also with DMA (including 64B).
 + This needed an edit in autogen.
+ Switch crypto tests to drv_vfio_pci as AVF has bad RSS on those.
+ Add two SRv6 cases to 3n-icx as it does not support hwasync crypto.
+ Repair name of UDP ASTF tests.

Change-Id: I91e20ec80dc4984c55d39b5f5ad38f26b48da33e
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

feat(profiles): Do not share seeds between streams

Avoiding any predictable memory access patterns
is more important than similarity between 2p and 6p profiles.

+ Seed values now match parts of IP source address.

Change-Id: Ib1830cf9d3e7b329e54de19a92ecea77c8baeeb5
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

feat(hoststack): Enable L4 checksum RX offload

As hoststack is never tested in container/VM (yet),
configuration there does not check the new flag.

Change-Id: Icac4837efcf035cad0f1e126e1bf90811aba16b2
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

style(jumbo): Unify naming of jumbo flag

Previously, the flag was sometimes called "jumbo",
sometimes "jumbo_frames". As we never use "jumbo" for things
other than frame size, unify the flag to "jumbo".

Change-Id: Ib688389799a4550ac9f51375f4defc06a02e6f03
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

Revert "feat(hoststack): Enable L4 checksum RX offload"

This reverts commit 4e897a7a91e8b4782da05a4c906392e62c8f8ab5.

Reason for revert: Container/Qemu is not conditioned.

Change-Id: I497caa2db24803f40811b3c60c359b4772cacda7
Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>

feat(hoststack): Enable L4 checksum RX offload

Change-Id: I169b06433ae962811aafa91ce90fe169b0bc4c71
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

C-Docs: Add links to C-Dash apps

Change-Id: I1bb9b3af12737203d45f981b80be88290d2c7be4
Signed-off-by: Tibor Frank <tifrank@cisco.com>

style(crypto): Move robot tag DRV_VFIO_PCI

Move DRV_VFIO_PCI after TXQ_SIZE_0.
Upcoming suites need more space in the preceding line.

131 suite files edited, luckily doable by two commands:
$ sed -i 's/ | DRV_VFIO_PCI//' *.robot
$ sed -i 's/ | TXQ_SIZE_0/ | TXQ_SIZE_0 | DRV_VFIO_PCI/' *.robot

Change-Id: Idf30d20d321922718d523a216056d22ae67e50aa
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

fix(core): AWS interface initialization

Signed-off-by: pmikus <peter.mikus@protonmail.ch>
Change-Id: I3ef110e8fec2fa8abafead1392a1b2af5e59f803

fix(packer): Update AWS image

Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: I1907fcb88dff0bb62cc6f5a8bf3ea58e3ad1578d

feat(terraform): New AWS AMI image

Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: I6951c4fc9f96a0acf44ba3201c91c9cb903889d7

fix(hoststack): Do not limit number of RX queues

This makes most scale hoststack tests correctly use both sibling cores.

- Except quic multi-client ones, which start failing instead.
 - To be fixed later.
 - VPP startup.conf looks correct to me.
 - All quic tests suffer from CSIT-1935 so no big loss.

Change-Id: If22c01651140865e188733039890f1fb0ceaa57a
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

feat(hoststack): Add stat pre/post actions

While adding runtime actions to hoststack tests is not easy,
adding pre and post actions for stats is easy.
The main hoststack measurement is treated as the stats trial,
the same way as the 10 measurements in MRR tests are.

+ Remove the previous partial info via "show" CLI commands.
- As in other VPP tests, stat telemetry is not exported.

Change-Id: Ib567aa810418568520d4d543c6d50431e85a3269
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

C-Dash: Fix: Zero division error

Change-Id: Ie3a61153c3e286f196617be438c2056a001b6faa
Signed-off-by: Tibor Frank <tifrank@cisco.com>

feat(etl): Add hosts

Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: Ibd3d0a1cdce67d17bfbe6fadfc1311af420a6c50

Revert "feat(topology): Enable 2 QATs"

This reverts commit 1776b3a1a483fd87170dfc0bf2eeb7eb610783bc.

Reason for revert: .

Change-Id: Ibad4684d16c4a348f27371cb2c4108f07cdaed21
Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>

C-Docs: Update rls2406 notes.

Change-Id: Iba15dc18b9e49dee0776e2897e45264a20ff2817
Signed-off-by: Tibor Frank <tifrank@cisco.com>

C-Dash: Add rls2406 data

Change-Id: Id597a02e3d8586f4c712ebf9eaddc46315b2a844
Signed-off-by: Tibor Frank <tifrank@cisco.com>

Update VPP_STABLE_VER files

Change-Id: If6f1c306c6c5d72708e447825f17debedbaa4b4f
Signed-off-by: Tibor Frank <tifrank@cisco.com>

feat(topology): Enable 2 QATs

Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: I5cec80ece019f660bc449349ce78ec2f35c5bd22

fix(etl): Typo"

Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: Ibd49015bc810a040d28509efc2e4bca26875229e

feat(etl): Release pipelines

Signed-off-by: pmikus <peter.mikus@protonmail.ch>
Change-Id: I4ce20267b4747bf1901b6175e0ec5936b583a510

Update DPDK_STABLE_VER files

Change-Id: Ia4355295e783f29c87db6ed009370bd794d9b4ce
Signed-off-by: Tibor Frank <tifrank@cisco.com>

C-Doc: Add placeholder for 2406 rls notes.

Change-Id: I89f2d314ff5ed33a86407489733544f197ad3d87
Signed-off-by: Tibor Frank <tifrank@cisco.com>

C-Dash: Enable reading of constants from env variables

+ add switching on/off the apps

Change-Id: I46e0cd2f214fd6a05ec0b87a433708bc4b6e2eb1
Signed-off-by: Tibor Frank <tifrank@cisco.com>

fix(various): files

Signed-off-by: pmikus <peter.mikus@protonmail.ch>
Change-Id: I601a54e543114957592548618df2f2f4bf790f82

fix(hoststack): Use TX checksum offload

Some tests were already doing that via Set Test Variable,
this moves the flag into Variables table for every suite.

Change-Id: I54e86f3fd10354dc87c2f04c70bbab771f89f3d2
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

fix(perf): Increase threshold for jumbo

The old limit of 1522 was introduced long time ago.
First, it appeared here [0], where it is correct
as that suite has zero overhead.
The first suite with wrong logic seems to be here [1]
(no "Add No Multi Seg to all DUTs" in 1518B testcase).
And when I was moving that logic to a keyword in [2],
I did not realize it is wrong with overhead.

This Change uses 1800 as the new threshold,
matching the value used for non-jumbo MTU.

[0] https://gerrit.fd.io/r/c/csit/+/2652/12/tests/perf/Bridge_Domain_Intel-X520-DA2.robot#70
[1] https://gerrit.fd.io/r/c/csit/+/4454/96/tests/perf/40ge2p1xl710-ethip4ipsecscaleip4-ip4base-interfaces-aes-gcm-ndrpdrdisc.robot#229
[2] https://gerrit.fd.io/r/c/csit/+/13411/35/resources/libraries/robot/performance/performance_utils.robot#84

Change-Id: Iff3703fcff0e4bbb1a6b10be359fa5ef67fd5422
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

Update VPP_STABLE_VER files

Change-Id: I818cc10e971c85cd8e712c05536b5813bf18749a
Signed-off-by: Tibor Frank <tifrank@cisco.com>

feat(device): Reconfigure

Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: I5ca0fc5832c249553c79dd9c5d4148ba64e61654

feat(bootstrap): Add more granular eb scripts

Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: Icbcd373ef815fa082d9be022fc201c96df140536