Performance: Fix l3fwd in 3node
[csit.git] / GPL / traffic_profiles / trex / trex-sl-2n3n-ethip4-ip4src254-10c1n.py
1 # Copyright (c) 2020 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 """Stream profile for T-rex traffic generator.
15
16 Stream profile:
17  - Two streams sent in directions 0 --> 1 and 1 --> 0 at the same time.
18  - Packet: ETH / IP /
19  - Direction 0 --> 1:
20    - Destination MAC address: 52:54:00:00:nf_id:01
21    - Source IP address range:      10.10.10.1 - 10.10.10.254
22    - Destination IP address range: 20.20.20.1
23  - Direction 1 --> 0:
24    - Destination MAC address: 52:54:00:00:nf_id:02
25    - Source IP address range:      20.20.20.1 - 20.20.20.254
26    - Destination IP address range: 10.10.10.1
27 """
28
29 from trex.stl.api import *
30 from profile_trex_stateless_base_class import TrafficStreamsBaseClass
31
32
33 class TrafficStreams(TrafficStreamsBaseClass):
34     """Stream profile."""
35
36     def __init__(self):
37         """Initialization and setting of streams' parameters."""
38
39         super(TrafficStreamsBaseClass, self).__init__()
40
41         # Service density parameters.
42         self.nf_chains = 10
43         self.nf_nodes = 1
44
45         # MACs used in packet headers.
46         self.p1_dst_start_mac = u"52:54:00:00:00:01"
47         self.p2_dst_start_mac = u"52:54:00:00:00:02"
48
49         # IPs used in packet headers.
50         self.p1_src_start_ip = u"10.10.10.1"
51         self.p1_src_end_ip = u"10.10.10.254"
52         self.p1_dst_start_ip = u"20.20.20.1"
53
54         self.p2_src_start_ip = u"20.20.20.1"
55         self.p2_src_end_ip = u"20.20.20.254"
56         self.p2_dst_start_ip = u"10.10.10.1"
57
58     def define_packets(self):
59         """Defines the packets to be sent from the traffic generator.
60
61         Packet definition: | ETH | IP |
62
63         :returns: Packets to be sent from the traffic generator.
64         :rtype: tuple
65         """
66
67         # Direction 0 --> 1
68         base_pkt_a = (
69             Ether(
70                 dst=self.p1_dst_start_mac
71             ) /
72             IP(
73                 src=self.p1_src_start_ip,
74                 dst=self.p1_dst_start_ip,
75                 proto=61
76             )
77         )
78         # Direction 1 --> 0
79         base_pkt_b = (
80             Ether(
81                 dst=self.p2_dst_start_mac
82             ) /
83             IP(
84                 src=self.p2_src_start_ip,
85                 dst=self.p2_dst_start_ip,
86                 proto=61
87             )
88         )
89
90         # Direction 0 --> 1
91         vm1 = STLScVmRaw(
92             [
93                 STLVmFlowVar(
94                     name=u"mac_dst",
95                     min_value=1,
96                     max_value=self.nf_chains*self.nf_nodes,
97                     size=1,
98                     step=self.nf_nodes,
99                     op=u"inc"
100                 ),
101                 STLVmWrFlowVar(
102                     fv_name=u"mac_dst",
103                     pkt_offset=4
104                 ),
105                 STLVmFlowVar(
106                     name=u"src",
107                     min_value=self.p1_src_start_ip,
108                     max_value=self.p1_src_end_ip,
109                     size=4, op=u"inc"
110                 ),
111                 STLVmWrFlowVar(
112                     fv_name=u"src",
113                     pkt_offset=u"IP.src"
114                 ),
115                 STLVmFixIpv4(
116                     offset=u"IP"
117                 )
118             ]
119         )
120         # Direction 1 --> 0
121         vm2 = STLScVmRaw(
122             [
123                 STLVmFlowVar(
124                     name=u"mac_dst",
125                     min_value=self.nf_nodes,
126                     max_value=self.nf_chains*self.nf_nodes,
127                     size=1,
128                     step=self.nf_nodes,
129                     op=u"inc"
130                 ),
131                 STLVmWrFlowVar(
132                     fv_name=u"mac_dst",
133                     pkt_offset=4
134                 ),
135                 STLVmFlowVar(
136                     name=u"src",
137                     min_value=self.p2_src_start_ip,
138                     max_value=self.p2_src_end_ip,
139                     size=4,
140                     op=u"inc"
141                 ),
142                 STLVmWrFlowVar(
143                     fv_name=u"src",
144                     pkt_offset=u"IP.src"
145                 ),
146                 STLVmFixIpv4(
147                     offset=u"IP"
148                 )
149             ]
150         )
151
152         return base_pkt_a, base_pkt_b, vm1, vm2
153
154
155 def register():
156     """Register this traffic profile to T-rex.
157
158     Do not change this function.
159
160     :return: Traffic streams.
161     :rtype: Object
162     """
163     return TrafficStreams()