Perf: Bump T-Rex to 2.88
[csit.git] / GPL / traffic_profiles / trex / trex-stl-3n-dot1qip4-vlan10ip4src254ip4dst254.py
1 # Copyright (c) 2021 Cisco and/or its affiliates.
2 #
3 # SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
4 #
5 # Licensed under the Apache License 2.0 or
6 # GNU General Public License v2.0 or later;  you may not use this file
7 # except in compliance with one of these Licenses. You
8 # may obtain a copy of the Licenses at:
9 #
10 #     http://www.apache.org/licenses/LICENSE-2.0
11 #     https://www.gnu.org/licenses/old-licenses/gpl-2.0-standalone.html
12 #
13 # Note: If this file is linked with Scapy, which is GPLv2+, your use of it
14 # must be under GPLv2+.  If at any point in the future it is no longer linked
15 # with Scapy (or other GPLv2+ licensed software), you are free to choose
16 # Apache 2.
17 #
18 # Unless required by applicable law or agreed to in writing, software
19 # distributed under the License is distributed on an "AS IS" BASIS,
20 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
21 # See the License for the specific language governing permissions and
22 # limitations under the License.
23
24 """Stream profile for T-rex traffic generator.
25
26 Stream profile:
27  - Two streams sent in directions 0 --> 1 and 1 --> 0 at the same time.
28  - Packet: ETH / DOT1Q / IP /
29  - Direction 0 --> 1:
30    - VLAN range:                    1 - 10
31    - Source IP address range:       10.0.0.1 - 10.0.0.254
32    - Destination IP address range:  20.0.0.1 - 20.0.0.254
33  - Direction 1 --> 0:
34    - VLAN range:                    1 - 10
35    - Source IP address range:       20.0.0.1 - 20.0.0.254
36    - Destination IP address range:  10.0.0.1 - 10.0.0.254
37 """
38
39 from trex.stl.api import *
40 from profile_trex_stateless_base_class import TrafficStreamsBaseClass
41
42
43 class TrafficStreams(TrafficStreamsBaseClass):
44     """Stream profile."""
45
46     def __init__(self):
47         """Initialization and setting of streams' parameters."""
48
49         super(TrafficStreamsBaseClass, self).__init__()
50
51         # VLAN IDs
52         self.vlans = 10
53
54         self.p1_vlan_start = 1
55         self.p1_vlan_end = self.p1_vlan_start + self.vlans - 1
56
57         self.p2_vlan_start = 1
58         self.p2_vlan_end = self.p2_vlan_start + self.vlans - 1
59
60
61         # IPs used in packet headers.
62         self.p1_src_start_ip = u"10.0.0.1"
63         self.p1_src_end_ip = u"10.0.0.254"
64
65         self.p1_dst_start_ip = u"20.0.0.1"
66         self.p1_dst_end_ip = u"20.0.0.254"
67
68         self.p2_src_start_ip = u"20.0.0.1"
69         self.p2_src_end_ip = u"20.0.0.254"
70
71         self.p2_dst_start_ip = u"10.0.0.1"
72         self.p2_dst_end_ip = u"10.0.0.254"
73
74     def define_packets(self):
75         """Defines the packets to be sent from the traffic generator.
76
77         Packet definition: | ETH | DOT1Q | IP |
78
79         :returns: Packets to be sent from the traffic generator.
80         :rtype: tuple
81         """
82
83         # Direction 0 --> 1
84         base_pkt_a = (
85             Ether() /
86             Dot1Q(
87                 vlan=self.p1_vlan_start
88             ) /
89             IP(
90                 src=self.p1_src_start_ip,
91                 dst=self.p1_dst_start_ip,
92                 proto=61
93             )
94         )
95         # Direction 1 --> 0
96         base_pkt_b = (
97             Ether() /
98             Dot1Q(
99                 vlan=self.p2_vlan_start
100             ) /
101             IP(
102                 src=self.p2_src_start_ip,
103                 dst=self.p2_dst_start_ip,
104                 proto=61
105             )
106         )
107
108         # Direction 0 --> 1
109         vm1 = STLScVmRaw(
110             [
111                 STLVmFlowVar(
112                     name=u"vlan",
113                     min_value=self.p1_vlan_start,
114                     max_value=self.p1_vlan_end,
115                     size=2,
116                     op=u"inc"
117                 ),
118                 STLVmWrFlowVar(
119                     fv_name=u"vlan",
120                     pkt_offset=u"Dot1Q.vlan"
121                 ),
122                 STLVmFlowVar(
123                   name=u"ip_src",
124                     min_value=self.p1_src_start_ip,
125                     max_value=self.p1_src_end_ip,
126                     size=4,
127                     op=u"random"
128                 ),
129                 STLVmWrFlowVar(
130                     fv_name=u"ip_src",
131                     pkt_offset=u"IP.src"
132                 ),
133                 STLVmFlowVar(
134                     name=u"ip_dst",
135                     min_value=self.p1_dst_start_ip,
136                     max_value=self.p1_dst_end_ip,
137                     size=4,
138                     op=u"random"
139                 ),
140                 STLVmWrFlowVar(
141                     fv_name=u"ip_dst",
142                     pkt_offset=u"IP.dst"
143                 ),
144                 STLVmFixIpv4(
145                     offset=u"IP"
146                 )
147             ]
148         )
149         # Direction 1 --> 0
150         vm2 = STLScVmRaw(
151             [
152                 STLVmFlowVar(
153                     name=u"vlan",
154                     min_value=self.p2_vlan_start,
155                     max_value=self.p2_vlan_end,
156                     size=2,
157                     op=u"inc"
158                 ),
159                 STLVmWrFlowVar(
160                     fv_name=u"vlan",
161                     pkt_offset=u"Dot1Q.vlan"
162                 ),
163                 STLVmFlowVar(
164                     name=u"ip_src",
165                     min_value=self.p2_src_start_ip,
166                     max_value=self.p2_src_end_ip,
167                     size=4,
168                     op=u"random"
169                 ),
170                 STLVmWrFlowVar(
171                     fv_name=u"ip_src",
172                     pkt_offset=u"IP.src"
173                 ),
174                 STLVmFlowVar(name=u"ip_dst",
175                     min_value=self.p2_dst_start_ip,
176                     max_value=self.p2_dst_end_ip,
177                     size=4,
178                     op=u"random"
179                 ),
180                 STLVmWrFlowVar(
181                     fv_name=u"ip_dst",
182                     pkt_offset=u"IP.dst"
183                 ),
184                 STLVmFixIpv4(
185                     offset=u"IP"
186                 )
187             ]
188         )
189
190         return base_pkt_a, base_pkt_b, vm1, vm2
191
192
193 def register():
194     """Register this traffic profile to T-rex.
195
196     Do not change this function.
197
198     :returns: Traffic streams.
199     :rtype: Object
200     """
201     return TrafficStreams()