tests/func/lisp/eth2p-ethip6ipsectptlispgpe-ip4base-eth-2vhost-1vm-func.robot

   1 # Copyright (c) 2016 Cisco and/or its affiliates.
   2 # Licensed under the Apache License, Version 2.0 (the "License");
   3 # you may not use this file except in compliance with the License.
   4 # You may obtain a copy of the License at:
   5 #
   6 #     http://www.apache.org/licenses/LICENSE-2.0
   7 #
   8 # Unless required by applicable law or agreed to in writing, software
   9 # distributed under the License is distributed on an "AS IS" BASIS,
  10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  11 # See the License for the specific language governing permissions and
  12 # limitations under the License.
  13
  14 *** Settings ***
  15 | Library | resources.libraries.python.topology.Topology
  16 | Library | resources.libraries.python.NodePath
  17 | Library | resources.libraries.python.Trace
  18 | Library | resources.libraries.python.IPUtil
  19 | Library | resources.libraries.python.L2Util
  20 | Library | resources.libraries.python.LispUtil
  21 | Library | resources.libraries.python.IPsecUtil
  22 | Library | resources.libraries.python.VatJsonUtil
  23 | Library | resources.libraries.python.IPv6Setup
  24 | Library | resources.libraries.python.VhostUser
  25 | Library | resources.libraries.python.QemuUtils
  26 | Library  | resources.libraries.python.VPPUtil
  27 | Library | String
  28 | Resource | resources/libraries/robot/traffic.robot
  29 | Resource | resources/libraries/robot/default.robot
  30 | Resource | resources/libraries/robot/interfaces.robot
  31 | Resource | resources/libraries/robot/testing_path.robot
  32 | Resource | resources/libraries/robot/ipv6.robot
  33 | Resource | resources/libraries/robot/ipsec.robot
  34 | Resource | resources/libraries/robot/qemu.robot
  35 | Resource | resources/libraries/robot/lisp/lispgpe.robot
  36 | Resource | resources/libraries/robot/bridge_domain.robot
  37 # Import configuration and test data:
  38 | Variables | resources/test_data/lisp/ipv4_lispgpe_ipv6/ipv4_lispgpe_ipsec_ipv6.py
  39 | ...
  40 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP | SKIP_VPP_PATCH
  41 | ...
  42 | Test Setup | Set up functional test
  43 | ...
  44 | Test Teardown | Tear down LISP functional test with QEMU | ${vm_node}
  45 | ...
  46 | Documentation | *IPv6 - ip4-ipsec-lispgpe-ip6 - main fib, virt2lisp, phy2lisp*
  47 | ...
  48 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
  49 | ... | with single links between nodes.
  50 | ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISPGPE-IPSec-IPv4-ICMP,\
  51 | ... | Eth-IPv6-IPSec-LISPGPE-IPv4-ICMP
  52 | ... | *[Cfg] DUT configuration:* Each DUT is configured with LISP and IPsec.\
  53 | ... | IPsec is in transport mode. Test cases are for IPsec configured both\
  54 | ... | on RLOC interface or lisp_gpe0 interface.
  55 | ... | *[Ver] TG verification:* Packet is send from TG(if1) across the DUT1 to\
  56 | ... | DUT2 where it is forwarded to TG(if2).
  57 | ... | *[Ref] Applicable standard specifications:* RFC6830, RFC4303.
  58
  59 *** Test Cases ***
  60 | TC01: DUT1 and DUT2 route IPv4 over Vhost to LISP GPE tunnel using IPsec (transport) on RLOC Int.
  61 | | [Documentation]
  62 | | ... | [Top] TG-DUT1-DUT2-TG.
  63 | | ... | [Enc] Eth-IPv6-LISPGPE-IPSec-IPv4-ICMP on DUT1-DUT2, Eth-IPv4-ICMP\
  64 | | ... | on TG-DUTn.
  65 | | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with\
  66 | | ... | IPsec in between DUTS. Create Qemu vm on DUT1 and configure bridge\
  67 | | ... | between two vhosts.
  68 | | ... | [Ver] Case: ip6-ipsec-lispgpe-ip4 - main fib, virt2lisp\
  69 | | ... | Make TG send ICMPv6 Echo Req between its interfaces across\
  70 | | ... | both DUTs and LISP GPE tunnel between them; verify IPv6 headers on\
  71 | | ... | received packets are correct.
  72 | | ... | [Ref] RFC6830, RFC4303.
  73 | | ...
  74 | | ${encr_alg}= | Crypto Alg AES CBC 128
  75 | | ${auth_alg}= | Integ Alg SHA1 96
  76 | | Given Setup Topology And Lisp
  77 | | And Setup Qemu DUT1
  78 | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
  79 | | When Configure manual keyed connection for IPSec
  80 | | ... | ${dut1_node} | ${dut1_to_dut2} | ${encr_alg} | ${encr_key}
  81 | | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi}
  82 | | ... | ${dut1_to_dut2_ip6} | ${dut2_to_dut1_ip6}
  83 | | And Configure manual keyed connection for IPSec
  84 | | ... | ${dut2_node} | ${dut2_to_dut1} | ${encr_alg} | ${encr_key}
  85 | | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi}
  86 | | ... | ${dut2_to_dut1_ip6} | ${dut1_to_dut2_ip6}
  87 | | Then Send packet and verify headers
  88 | | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
  89 | | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dst_vhost_mac}
  90 | | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
  91 | | And Send packet and verify headers
  92 | | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
  93 | | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
  94 | | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
  95
  96 | TC02: DUT1 and DUT2 route IPv4 over Vhost to LISP GPE tunnel using IPsec (transport) on lisp_gpe0 Int.
  97 | | [Documentation]
  98 | | ... | [Top] TG-DUT1-DUT2-TG.
  99 | | ... | [Enc] Eth-IPv6-IPSec-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2,\
 100 | | ... | Eth-IPv6-ICMPv6, on TG-DUTn.
 101 | | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with\
 102 | | ... | IPsec in between DUTS.
 103 | | ... | [Ver] Case: ip6-ipsec-lispgpe-ip4 - main fib, virt2lisp\
 104 | | ... | Make TG send ICMPv6 Echo Req between its interfaces across\
 105 | | ... | both DUTs and LISP GPE tunnel between them; verify IPv6 headers on\
 106 | | ... | received packets are correct.
 107 | | ... | [Ref] RFC6830, RFC4303.
 108 | | ...
 109 | | ${encr_alg}= | Crypto Alg AES CBC 128
 110 | | ${auth_alg}= | Integ Alg SHA1 96
 111 | | Given Setup Topology And Lisp
 112 | | And Setup Qemu DUT1
 113 | | ${lisp1_if_idx}= | resources.libraries.python.InterfaceUtil.get sw if index
 114 | | ... | ${dut1_node} | ${lisp_gpe_int}
 115 | | ${lisp2_if_idx}= | resources.libraries.python.InterfaceUtil.get sw if index
 116 | | ... | ${dut2_node} | ${lisp_gpe_int}
 117 | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
 118 | | When Configure manual keyed connection for IPSec
 119 | | ... | ${dut1_node} | ${lisp1_if_idx} | ${encr_alg} | ${encr_key}
 120 | | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi}
 121 | | ... | ${dut1_to_dut2_ip6} | ${dut2_to_dut1_ip6}
 122 | | And Configure manual keyed connection for IPSec
 123 | | ... | ${dut2_node} | ${lisp2_if_idx} | ${encr_alg} | ${encr_key}
 124 | | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi}
 125 | | ... | ${dut2_to_dut1_ip6} | ${dut1_to_dut2_ip6}
 126 | | Then Send packet and verify headers
 127 | | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
 128 | | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dst_vhost_mac}
 129 | | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
 130 | | And Send packet and verify headers
 131 | | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
 132 | | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
 133 | | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
 134
 135 *** Keywords ***
 136 | Setup Topology And Lisp
 137 | | [Documentation] | Setup IPs and neighbors for interfaces on DUT1 and DUT2\
 138 | | ... | and then setup LISP.
 139 | | Configure path in 3-node circular topology
 140 | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
 141 | | Set interfaces in 3-node circular topology up
 142 | | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6}
 143 | | ... | ${prefix6}
 144 | | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6}
 145 | | ... | ${prefix6}
 146 | | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip4}
 147 | | ... | ${prefix4}
 148 | | Vpp Set If IPv6 Addr | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip6}
 149 | | ... | ${prefix6}
 150 | | Vpp Set If IPv6 Addr | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip4}
 151 | | ... | ${prefix4}
 152 | | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4}
 153 | | ... | ${tg_to_dut2_mac}
 154 | | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6}
 155 | | ... | ${dut2_to_dut1_mac}
 156 | | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6}
 157 | | ... | ${dut1_to_dut2_mac}
 158 | | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4}
 159 | | ... | ${tg_to_dut1_mac}
 160 | | Vpp All RA Suppress Link Layer | ${nodes}
 161 | | Configure LISP GPE topology in 3-node circular topology
 162 | | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
 163 | | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
 164 | | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
 165 | | ... | ${dut1_to_dut2_ip_static_adjacency}
 166 | | ... | ${dut2_to_dut1_ip_static_adjacency}
 167
 168 | Setup Qemu DUT1
 169 | | [Documentation] | Setup Vhosts on DUT1 and setup IP to one of them. Setup\
 170 | | ... | Qemu and bridge the vhosts.
 171 | | ${vhost1}= | And Vpp Create Vhost User Interface | ${dut1_node} | ${sock1}
 172 | | ${vhost2}= | And Vpp Create Vhost User Interface | ${dut1_node} | ${sock2}
 173 | | Set Interface Address | ${dut1_node} | ${vhost2} | ${vhost_ip} | ${prefix4}
 174 | | Set Interface State | ${dut1_node} | ${vhost1} | up
 175 | | Set Interface State | ${dut1_node} | ${vhost2} | up
 176 | | Create bridge domain | ${dut1_node} | ${bid} | learn=${TRUE}
 177 | | Add interface to bridge domain | ${dut1_node}
 178 | | ... | ${dut1_to_tg} | ${bid} | 0
 179 | | Add interface to bridge domain | ${dut1_node}
 180 | | ... | ${vhost1} | ${bid} | 0
 181 | | ${vhost_mac}= | Get Vhost User Mac By SW Index | ${dut1_node} | ${vhost2}
 182 | | Set test variable | ${dst_vhost_mac} | ${vhost_mac}
 183 | | Configure VM for vhost L2BD forwarding | ${dut1_node} | ${sock1} | ${sock2}