fdcea357ef20be8327477cbf44fab83109b500ef
[csit.git] / tests / vpp / device / container_memif / 2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2memif-1dcr-scapy.robot
1 # Copyright (c) 2021 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/shared/default.robot
16 |
17 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
18 | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | DRV_VFIO_PCI
19 | ... | RXQ_SIZE_0 | TXQ_SIZE_0
20 | ... | ethip4-l2bdbasemaclrn-eth-2memif-1dcr
21 |
22 | Suite Setup | Setup suite topology interfaces | scapy
23 | Test Setup | Setup test
24 | Test Teardown | Tear down test | packet_trace | telemetry | container
25 |
26 | Test Template | Local Template
27 |
28 | Documentation | *L2 bridge-domain test cases with memif interface*
29 |
30 | ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \
31 | ... | with single links between nodes.
32 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.\
33 | ... | Both apply to all links.
34 | ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain \
35 | ... | switching. Container is connected to VPP via Memif interface. \
36 | ... | Container is running same VPP version as running on DUT.
37 | ... | *[Ver] TG verification:* Test IPv4 packets with IP protocol=61\
38 | ... | are sent in both directions by TG on links to DUT1 and via container; \
39 | ... | on receive TG verifies packets for correctness and their IPv4 \
40 | ... | src-addr, dst-addr and MAC addresses.
41 | ... | *[Ref] Applicable standard specifications:* RFC792
42
43 *** Variables ***
44 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
45 | ${crypto_type}= | ${None}
46 | ${nic_name}= | Intel-X710
47 | ${nic_driver}= | vfio-pci
48 | ${nic_rxq_size}= | 0
49 | ${nic_txq_size}= | 0
50 | ${nic_pfs}= | 2
51 | ${nic_vfs}= | 0
52 | ${overhead}= | ${0}
53 # Container
54 | ${container_engine}= | Docker
55 | ${container_chain_topology}= | chain_functional
56 # Telemetry
57 | ${telemetry_profile}= | vpp_test_teardown
58
59 *** Keywords ***
60 | Local Template
61 | | [Documentation]
62 | | ... | [Ver] Make TG send IPv4 packets in both directions between two\
63 | | ... | of its interfaces to be switched by DUT to and from docker; verify\
64 | | ... | all packets are received.
65 | |
66 | | ... | *Arguments:*
67 | | ... | - frame_size - Framesize in Bytes in integer. Type: integer
68 | | ... | - phy_cores - Number of physical cores. Type: integer
69 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
70 | |
71 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
72 | |
73 | | Set Test Variable | \${frame_size}
74 | |
75 | | Given Set Max Rate And Jumbo
76 | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
77 | | And Pre-initialize layer driver | ${nic_driver}
78 | | And Apply startup configuration on all VPP DUTs | with_trace=${True}
79 | | When Initialize layer driver | ${nic_driver}
80 | | And Initialize layer interface
81 | | And Start containers for test | auto_scale=${False} | pinning=${False}
82 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
83 | | ... | auto_scale=${False}
84 | | Then Send IPv4 bidirectionally and verify received packets
85 | | ... | ${tg} | ${TG_pf1}[0] | ${TG_pf2}[0]
86
87 *** Test Cases ***
88 | 64B-0c-ethip4-l2bdbasemaclrn-eth-2memif-1dcr-scapy
89 | | [Tags] | 64B | 0C
90 | | frame_size=${64} | phy_cores=${0}