c82fed91d91fea7e557351211a14b21abcd6389c
[csit.git] / tests / vpp / device / interfaces / eth2p-ethipv4-l2bdbasemaclrn-eth-2tap-dev.robot
1 # Copyright (c) 2019 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/shared/default.robot
16 |
17 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
18 | ... | NIC_Virtual | ETH | L2BD | BASE | 2TAP | DRV_VFIO_PCI
19 |
20 | Suite Setup | Setup suite single link | scapy
21 | Test Setup | Setup test | namespace
22 | Test Teardown | Tear down test | packet_trace | namespace | linux_bridge
23 |
24 | Test Template | Local Template
25 |
26 | Documentation | *Tap Interface Traffic Tests*
27 |
28 | ... | *[Top] Network Topologies:* TG=DUT1 2-node topology with two links
29 | ... | between nodes.
30 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of
31 | ... | IPv4.
32 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2
33 | ... | bridge-domain (L2BD) MAC learning enabled; Split Horizon Groups (SHG)
34 | ... | are set depending on test case; Namespaces (NM)
35 | ... | are set on DUT1 with attached linux-TAP.
36 | ... | *[Ver] TG verification:* Test IPv4 packets with IP protocol=61
37 | ... | are sent by TG on link to DUT1; On receipt TG verifies packets
38 | ... | for correctness and their IPv4 src-addr, dst-addr, and MAC addresses.
39 | ... | *[Ref] Applicable standard specifications:*
40
41 *** Variables ***
42 | @{plugins_to_enable}= | dpdk_plugin.so
43 | ${crypto_type}= | ${None}
44 | ${nic_name}= | virtual
45 | ${nic_driver}= | vfio-pci
46 | ${overhead}= | ${0}
47 | ${bid_TAP}= | tapBr
48
49 *** Keywords ***
50 | Local Template
51 | | [Documentation]
52 | | ... | [Ver] Packet sent from TG is passed through all L2BD and received\
53 | | ... | back on TG. Then src_ip, dst_ip and MAC are checked.
54 | |
55 | | ... | *Arguments:*
56 | | ... | - frame_size - Framesize in Bytes in integer. Type: integer
57 | | ... | - phy_cores - Number of physical cores. Type: integer
58 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
59 | |
60 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
61 | |
62 | | Set Test Variable | \${frame_size}
63 | |
64 | | Given Set Max Rate And Jumbo
65 | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
66 | | And Pre-initialize layer driver | ${nic_driver}
67 | | And Apply startup configuration on all VPP DUTs | with_trace=${True}
68 | | When Initialize layer driver | ${nic_driver}
69 | | And Initialize layer interface
70 | | ${int1}= | And Add Tap Interface | ${dut1} | tap0
71 | | ${int2}= | And Add Tap Interface | ${dut1} | tap1
72 | | And Set Interface State | ${dut1} | ${int1} | up
73 | | And Set Interface State | ${dut1} | ${int2} | up
74 | | And Create bridge domain | ${dut1} | 19 | learn=${TRUE}
75 | | And Create bridge domain | ${dut1} | 20 | learn=${TRUE}
76 | | And Linux Add Bridge | ${dut1} | ${bid_TAP} | tap0 | tap1
77 | | And Add interface to bridge domain | ${dut1} | ${int1} | 20 | 0
78 | | And Add interface to bridge domain | ${dut1} | ${dut1_if1} | 20 | 0
79 | | And Add interface to bridge domain | ${dut1} | ${int2} | 19 | 0
80 | | And Add interface to bridge domain | ${dut1} | ${dut1_if2} | 19 | 0
81 | | Then Send IP packet and verify received packet
82 | | ... | ${tg} | ${tg_if1} | ${tg_if2}
83
84 *** Test Cases ***
85 | tc01-64B-ethipv4-l2bdbasemaclrn-eth-2tap-dev
86 | | [Tags] | 64B
87 | | frame_size=${64} | phy_cores=${0}