efaab06a0a6b828d68cf542c8542b1ba0904c0d3
[csit.git] / tests / vpp / device / ip4_tunnels / lisp / 2n1l-10ge2p1x710-ethip4lisp-ip4base-scapy.robot
1 # Copyright (c) 2021 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/shared/default.robot
16 |
17 | Variables | resources/test_data/lisp/lisp.py
18 |
19 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
20 | ... | NIC_Intel-X710 | IP4FWD | LISP | LISP_IP4o4 | DRV_VFIO_PCI
21 | ... | RXQ_SIZE_0 | TXQ_SIZE_0
22 | ... | ethip4lisp-ip4base
23 |
24 | Suite Setup | Setup suite topology interfaces | scapy
25 | Test Setup | Setup test
26 | Test Teardown | Tear down test | packet_trace | telemetry
27 |
28 | Test Template | Local Template
29 |
30 | Documentation | **ip4-lisp-ip4 encapsulation test cases**
31 | ... |
32 | ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node \
33 | ... | circular with single links between nodes.
34 | ... |
35 | ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-LISP-IPv4-ICMPv4 \
36 | ... | on DUT1-TG, Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing \
37 | ... | over LISPoIPv4 tunnel.
38 | ... |
39 | ... | - **[Cfg] DUT configuration:** DUT is configured with IPv4. \
40 | ... | routing and static routes. LISPoIPv4 tunnel is \
41 | ... | configured between DUT1 and TG2.
42 | ... |
43 | ... | - **[Ver] TG verification:** Test ICMPv4 Echo Request packets \
44 | ... | are sent by TG on if1 link to DUT1; on receive TG verifies \
45 | ... | packets for correctness and their IPv4 src-addr, dst-addr \
46 | ... | and MAC addresses.
47 | ... |
48 | ... | - **[Ref] Applicable standard specifications:** RFC6830.
49
50 *** Variables ***
51 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lisp_plugin.so
52 | ${crypto_type}= | ${None}
53 | ${nic_name}= | Intel-X710
54 | ${nic_driver}= | vfio-pci
55 | ${nic_rxq_size}= | 0
56 | ${nic_txq_size}= | 0
57 | ${nic_pfs}= | 2
58 | ${nic_vfs}= | 0
59 | ${overhead}= | ${54}
60 # Telemetry
61 | ${telemetry_profile}= | vpp_test_teardown
62
63 *** Keywords ***
64 | Local Template
65 | | [Documentation]
66 | | ... | - **[Cfg]** On DUT1 configure LISP.
67 | |
68 | | ... | *Arguments:*
69 | | ... | - frame_size - Framesize in Bytes in integer. Type: integer
70 | | ... | - phy_cores - Number of physical cores. Type: integer
71 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
72 | |
73 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
74 | |
75 | | Set Test Variable | \${frame_size}
76 | |
77 | | Given Set Max Rate And Jumbo
78 | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
79 | | And Pre-initialize layer driver | ${nic_driver}
80 | | And Apply startup configuration on all VPP DUTs | with_trace=${True}
81 | | When Initialize layer driver | ${nic_driver}
82 | | And Initialize layer interface
83 | | And Configure topology for IPv4 LISP testing
84 | | And Configure LISP in 2-node circular topology
85 | | ... | ${dut1} | ${DUT1_${int}2}[0] | ${NONE}
86 | | ... | ${duts_locator_set} | ${dut1_ip4_eid}
87 | | ... | ${dut1_to_tg_ip4_static_adjacency}
88 | | Then Send packet and verify LISP encap
89 | | ... | ${tg} | ${tg_if1_ip4} | ${dst_ip4}
90 | | ... | ${TG_pf1}[0] | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0]
91 | | ... | ${TG_pf2}[0] | ${DUT1_vf2_mac}[0] | ${TG_pf2_mac}[0]
92 | | ... | ${src_rloc4} | ${dst_rloc4}
93
94 *** Test Cases ***
95 | 64B-0c-ethip4lisp-ip4base-scapy
96 | | [Tags] | 64B | 0C
97 | | frame_size=${64} | phy_cores=${0}