doc: fixing documentation structure
[csit.git] / tests / vpp / device / ip6_tunnels / lisp / 2n1l-10ge2p1x710-ethip6lispgpe-ip6base-scapy.robot
1 # Copyright (c) 2021 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/shared/default.robot
16 |
17 | Variables | resources/test_data/lisp/lisp.py
18 |
19 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
20 | ... | NIC_Intel-X710 | IP6FWD | LISP | LISPGPE_IP6o6 | DRV_VFIO_PCI
21 | ... | RXQ_SIZE_0 | TXQ_SIZE_0
22 | ... | ethip6lispgpe-ip6base
23 |
24 | Suite Setup | Setup suite topology interfaces | scapy
25 | Test Setup | Setup test
26 | Test Teardown | Tear down test | packet_trace | telemetry
27 |
28 | Test Template | Local Template
29 |
30 | Documentation | **ip6-lispgpe-ip6 encapsulation test cases**
31 | ... |
32 | ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node \
33 | ... | circular with single links between nodes.
34 | ... |
35 | ... | - **[Enc] Packet Encapsulations:** Eth-IPv6-LISPGPE-IPv6-ICMPv6 \
36 | ... | on DUT1-TG, Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing \
37 | ... | over LISPoIPv6 tunnel.
38 | ... |
39 | ... | - **[Cfg] DUT configuration:** DUT1 and TG(if2) are configured \
40 | ... | with IPv6 routing and static routes. LISPoIPv6 tunnel is \
41 | ... | configured between DUT1 and TG.
42 | ... |
43 | ... | - **[Ver] TG verification:** Test ICMPv6 Echo Request packets \
44 | ... | are sent in TG->DUT(if1); On receive TG(if2) verifies \
45 | ... | packets for correctness and their IPv6 src-addr, \
46 | ... | dst-addr and MAC addresses.
47 | ... |
48 | ... | - **[Ref] Applicable standard specifications:** RFC6830.
49
50 *** Variables ***
51 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lisp_plugin.so
52 | ${crypto_type}= | ${None}
53 | ${nic_name}= | Intel-X710
54 | ${nic_driver}= | vfio-pci
55 | ${nic_rxq_size}= | 0
56 | ${nic_txq_size}= | 0
57 | ${nic_pfs}= | 2
58 | ${nic_vfs}= | 0
59 | ${overhead}= | ${54}
60 | ${is_gpe}= | ${1}
61 # Telemetry
62 | ${telemetry_profile}= | vpp_test_teardown
63
64 *** Keywords ***
65 | Local Template
66 | | [Documentation]
67 | | ... | - **[Cfg]** On DUT1 configure LISP.
68 | |
69 | | ... | *Arguments:*
70 | | ... | - frame_size - Framesize in Bytes in integer. Type: integer
71 | | ... | - phy_cores - Number of physical cores. Type: integer
72 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
73 | |
74 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
75 | |
76 | | Set Test Variable | \${frame_size}
77 | |
78 | | Given Set Max Rate And Jumbo
79 | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
80 | | And Pre-initialize layer driver | ${nic_driver}
81 | | And Apply startup configuration on all VPP DUTs | with_trace=${True}
82 | | When Initialize layer driver | ${nic_driver}
83 | | And Initialize layer interface
84 | | And Configure topology for IPv6 LISP testing
85 | | And Configure LISP in 2-node circular topology
86 | | ... | ${dut1} | ${DUT1_${int}2}[0] | ${NONE}
87 | | ... | ${duts_locator_set} | ${dut1_ip6_eid}
88 | | ... | ${dut1_to_tg_ip6_static_adjacency} | ${is_gpe}
89 | | Then Send packet and verify LISP GPE encap
90 | | ... | ${tg} | ${tg_if1_ip6} | ${dst_ip6}
91 | | ... | ${TG_pf1}[0] | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0]
92 | | ... | ${TG_pf2}[0] | ${DUT1_vf2_mac}[0] | ${TG_pf2_mac}[0]
93 | | ... | ${src_rloc6} | ${dst_rloc6}
94
95 *** Test Cases ***
96 | 78B-0c-ethip6lispgpe-ip6base-scapy
97 | | [Tags] | 78B | 0C
98 | | frame_size=${78} | phy_cores=${0}