dc0d58222ac9ac55526586c91dec1b05c2f9fa73
[csit.git] / tests / vpp / device / vm_vhost / l2xc / eth2p-ethipv4-l2xcbase-eth-2vhost-1vm-dev.robot
1 # Copyright (c) 2019 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/shared/default.robot
16 |
17 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
18 | ... | NIC_Virtual | ETH | L2XCFWD | BASE | VHOST | 1VM | DRV_VFIO_PCI
19 |
20 | Suite Setup | Setup suite single link | scapy
21 | Test Setup | Setup test
22 | Test Teardown | Tear down test | packet_trace | vhost
23 |
24 | Test Template | Local Template
25 |
26 | Documentation | *L2 cross-connect test cases with vhost user interface*
27 |
28 | ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \
29 | ... | VM and single links between nodes.
30 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
31 | ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect \
32 | ... | (L2XC) switching. Qemu Guest is connected to VPP via vhost-user \
33 | ... | interfaces. Guest is configured with VPP l2 cross-connect \
34 | ... | interconnecting vhost-user interfaces.
35 | ... | *[Ver] TG verification:* Test IPv4 packets with IP protocol=61 are \
36 | ... | sent in both directions by TG on links to DUT1 via VM; on receive TG \
37 | ... | verifies packets for correctness and their IPv4 src-addr, dst-addr \
38 | ... | and MAC addresses.
39 | ... | *[Ref] Applicable standard specifications:* RFC792
40
41 *** Variables ***
42 | @{plugins_to_enable}= | dpdk_plugin.so
43 | ${crypto_type}= | ${None}
44 | ${nic_name}= | virtual
45 | ${nic_driver}= | vfio-pci
46 | ${overhead}= | ${0}
47 | ${nf_chains}= | ${1}
48 | ${nf_nodes}= | ${1}
49 | ${nf_dtc} | ${1}
50 | ${nf_dtcr} | ${1}
51
52 *** Keywords ***
53 | Local Template
54 | | [Documentation]
55 | | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv4. [Cfg] On DUT configure \
56 | | ... | two L2 cross-connects (L2XC), each with one untagged interface \
57 | | ... | to TG and untagged i/f to local VM over vhost-user. [Ver] Make \
58 | | ... | TG send IPv4 packets in both directions between two of its \
59 | | ... | i/fs to be switched by DUT to and from VM; verify all packets \
60 | | ... | are received. [Ref]
61 | |
62 | | ... | *Arguments:*
63 | | ... | - frame_size - Framesize in Bytes in integer. Type: integer
64 | | ... | - phy_cores - Number of physical cores. Type: integer
65 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
66 | |
67 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
68 | |
69 | | Set Test Variable | \${frame_size}
70 | |
71 | | Given Set Max Rate And Jumbo
72 | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
73 | | And Pre-initialize layer driver | ${nic_driver}
74 | | And Apply startup configuration on all VPP DUTs | with_trace=${True}
75 | | When Initialize layer driver | ${nic_driver}
76 | | And Initialize layer interface
77 | | And Initialize L2 xconnect with Vhost-User | nf_nodes=${nf_nodes}
78 | | And Configure chains of NFs connected via vhost-user
79 | | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | vnf=vpp_chain_l2xc
80 | | ... | pinning=${False}
81 | | Then Send IPv4 bidirectionally and verify received packets | ${tg}
82 | | ... | ${tg_if1} | ${tg_if2}
83
84 *** Test Cases ***
85 | tc01-64B-ethipv4-l2xcbase-eth-2vhost-1vm-dev
86 | | [Tags] | 64B
87 | | frame_size=${64} | phy_cores=${0}