tests/vpp/func/crypto/default/eth2p-ethip6ipsectptlispgpe-ip4base-func.robot

   1 # Copyright (c) 2016 Cisco and/or its affiliates.
   2 # Licensed under the Apache License, Version 2.0 (the "License");
   3 # you may not use this file except in compliance with the License.
   4 # You may obtain a copy of the License at:
   5 #
   6 #     http://www.apache.org/licenses/LICENSE-2.0
   7 #
   8 # Unless required by applicable law or agreed to in writing, software
   9 # distributed under the License is distributed on an "AS IS" BASIS,
  10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  11 # See the License for the specific language governing permissions and
  12 # limitations under the License.
  13
  14 *** Settings ***
  15 | Library | resources.libraries.python.topology.Topology
  16 | Library | resources.libraries.python.NodePath
  17 | Library | resources.libraries.python.Trace
  18 | Library | resources.libraries.python.IPUtil
  19 | Library | resources.libraries.python.L2Util
  20 | Library | resources.libraries.python.LispUtil
  21 | Library | resources.libraries.python.IPsecUtil
  22 | Library | resources.libraries.python.VatJsonUtil
  23 | Library | resources.libraries.python.IPv6Setup
  24 | Library | resources.libraries.python.VhostUser
  25 | Library | resources.libraries.python.QemuUtils
  26 | Library | String
  27 | Resource | resources/libraries/robot/shared/traffic.robot
  28 | Resource | resources/libraries/robot/shared/default.robot
  29 | Resource | resources/libraries/robot/shared/interfaces.robot
  30 | Resource | resources/libraries/robot/shared/testing_path.robot
  31 | Resource | resources/libraries/robot/ip/ip6.robot
  32 | Resource | resources/libraries/robot/crypto/ipsec.robot
  33 | Resource | resources/libraries/robot/vm/qemu.robot
  34 | Resource | resources/libraries/robot/overlay/lispgpe.robot
  35 | Resource | resources/libraries/robot/l2/l2_bridge_domain.robot
  36 # Import configuration and test data:
  37 | Variables | resources/test_data/lisp/ipv4_lispgpe_ipv6/ipv4_lispgpe_ipsec_ipv6.py
  38 | ...
  39 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP | SKIP_VPP_PATCH
  40 | ...
  41 | Test Setup | Set up functional test
  42 | ...
  43 | Test Teardown | Tear down functional test
  44 | ...
  45 | Documentation | *IPv6 - ip4-ipsec-lispgpe-ip6 - main fib, virt2lisp, phy2lisp*
  46 | ...
  47 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
  48 | ... | with single links between nodes.
  49 | ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISPGPE-IPSec-IPv4-ICMP,\
  50 | ... | Eth-IPv6-IPSec-LISPGPE-IPv4-ICMP
  51 | ... | *[Cfg] DUT configuration:* Each DUT is configured with LISP and IPsec.\
  52 | ... | IPsec is in transport mode. Tests cases are for IPsec configured both\
  53 | ... | on RLOC interface or lisp_gpe0 interface.
  54 | ... | *[Ver] TG verification:* Packet is send from TG(if1) across the DUT1 to\
  55 | ... | DUT2 where it is forwarded to TG(if2).
  56 | ... | *[Ref] Applicable standard specifications:* RFC6830, RFC4303.
  57
  58 *** Test Cases ***
  59 | TC01: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) on RLOC Int.
  60 | | [Documentation]
  61 | | ... | [Top] TG-DUT1-DUT2-TG.
  62 | | ... | [Enc] Eth-IPv6-LISPGPE-IPSec-IPv4-ICMP on DUT1-DUT2, Eth-IPv4-ICMP\
  63 | | ... | on TG-DUTn.
  64 | | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with\
  65 | | ... | IPsec in between DUTS.
  66 | | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces across\
  67 | | ... | both DUTs and LISP GPE tunnel between them; verify IPv4 headers on\
  68 | | ... | received packets are correct.
  69 | | ... | [Ref] RFC6830, RFC4303.
  70 | | ...
  71 | | ${encr_alg}= | Crypto Alg AES CBC 128
  72 | | ${auth_alg}= | Integ Alg SHA1 96
  73 | | Given Setup Topology And Lisp
  74 | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
  75 | | When Configure manual keyed connection for IPSec
  76 | | ... | ${dut1_node} | ${dut1_to_dut2} | ${encr_alg} | ${encr_key}
  77 | | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi}
  78 | | ... | ${dut1_to_dut2_ip6} | ${dut2_to_dut1_ip6}
  79 | | And Configure manual keyed connection for IPSec
  80 | | ... | ${dut2_node} | ${dut2_to_dut1} | ${encr_alg} | ${encr_key}
  81 | | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi}
  82 | | ... | ${dut2_to_dut1_ip6} | ${dut1_to_dut2_ip6}
  83 | | Then Send packet and verify headers
  84 | | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
  85 | | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
  86 | | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
  87 | | And Send packet and verify headers
  88 | | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
  89 | | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
  90 | | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
  91
  92 | TC02: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) on lisp_gpe0 Int.
  93 | | [Documentation]
  94 | | ... | [Top] TG-DUT1-DUT2-TG.
  95 | | ... | [Enc] Eth-IPv6-IPSec-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMP\
  96 | | ... | on TG-DUTn.
  97 | | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with\
  98 | | ... | IPsec in between DUTS.
  99 | | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces across\
 100 | | ... | both DUTs and LISP GPE tunnel between them; verify IPv4 headers on\
 101 | | ... | received packets are correct.
 102 | | ... | [Ref] RFC6830, RFC4303.
 103 | | ...
 104 | | ${encr_alg}= | Crypto Alg AES CBC 128
 105 | | ${auth_alg}= | Integ Alg SHA1 96
 106 | | Given Setup Topology And Lisp
 107 | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
 108 | | ${lisp_if_idx}= | resources.libraries.python.InterfaceUtil.get sw if index
 109 | | ... | ${dut1_node} | ${lisp_gpe_int}
 110 | | When Configure manual keyed connection for IPSec
 111 | | ... | ${dut1_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key}
 112 | | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi}
 113 | | ... | ${dut1_to_dut2_ip6} | ${dut2_to_dut1_ip6}
 114 | | And Configure manual keyed connection for IPSec
 115 | | ... | ${dut2_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key}
 116 | | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi}
 117 | | ... | ${dut2_to_dut1_ip6} | ${dut1_to_dut2_ip6}
 118 | | Then Send packet and verify headers
 119 | | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
 120 | | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
 121 | | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
 122 | | And Send packet and verify headers
 123 | | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
 124 | | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
 125 | | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
 126
 127 *** Keywords ***
 128 | Setup Topology And Lisp
 129 | | [Documentation] | Setup IPs and neighbors for interfaces on DUT1 and DUT2\
 130 | | ... | and then setup LISP.
 131 | | Configure path in 3-node circular topology
 132 | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
 133 | | Set interfaces in 3-node circular topology up
 134 | | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6}
 135 | | ... | ${prefix6}
 136 | | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6}
 137 | | ... | ${prefix6}
 138 | | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip4}
 139 | | ... | ${prefix4}
 140 | | Vpp Set If IPv6 Addr | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip6}
 141 | | ... | ${prefix6}
 142 | | Vpp Set If IPv6 Addr | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip4}
 143 | | ... | ${prefix4}
 144 | | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4}
 145 | | ... | ${tg_to_dut2_mac}
 146 | | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6}
 147 | | ... | ${dut2_to_dut1_mac}
 148 | | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6}
 149 | | ... | ${dut1_to_dut2_mac}
 150 | | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4}
 151 | | ... | ${tg_to_dut1_mac}
 152 | | Vpp All RA Suppress Link Layer | ${nodes}
 153 | | Configure LISP GPE topology in 3-node circular topology
 154 | | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
 155 | | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
 156 | | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
 157 | | ... | ${dut1_to_dut2_ip_static_adjacency}
 158 | | ... | ${dut2_to_dut1_ip_static_adjacency}