CSIT-1196: Add hsw/skx and 2n/3n to the report structure
[csit.git] / tests / vpp / perf / container_memif / 10ge2p1x520-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdrdisc.robot
1 # Copyright (c) 2017 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/performance/performance_setup.robot
16 | ...
17 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
18 | ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | BASE | MEMIF | LXC
19 | ...
20 | Suite Setup | Run Keywords
21 | ... | Set up 3-node performance topology with DUT's NIC model | L2
22 | ... | Intel-X520-DA2
23 | ... | AND | Set up performance test suite with MEMIF
24 | ... | AND | Set up performance topology with containers
25 | ...
26 | Suite Teardown | Tear down 3-node performance topology with container
27 | ...
28 | Test Setup | Run Keywords
29 | ... | Set up performance test
30 | ... | AND | Restart VPP in all 'VNF' containers
31 | ...
32 | Test Teardown | Tear down performance discovery test | ${min_rate}pps
33 | ... | ${framesize} | ${traffic_profile}
34 | ...
35 | Test Template | Local template
36 | ...
37 | Documentation | *RFC2544: Pkt throughput L2BD test cases*
38 | ...
39 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
40 | ... | with single links between nodes.
41 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
42 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2
43 | ... | bridge domains and MAC learning enabled. LXC is connected to VPP via
44 | ... | Memif interface. LXC is running same VPP version as running on DUT. LXC
45 | ... | is limited via cgroup to use 3 cores allocated from pool of isolated
46 | ... | CPUs. There are no memory constraints. DUT1 and DUT2 tested with
47 | ... | 2p10GE NIC X520 Niantic by Intel.
48 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
49 | ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
50 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage
51 | ... | of packets transmitted. NDR and PDR are discovered for different
52 | ... | Ethernet L2 frame sizes using either binary search or linear search
53 | ... | algorithms with configured starting rate and final step that determines
54 | ... | throughput measurement resolution. Test packets are generated by TG on
55 | ... | links to DUTs. TG traffic profile contains two L3 flow-groups
56 | ... | (flow-group per direction, 253 flows per flow-group) with all packets
57 | ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
58 | ... | payload. MAC addresses are matching MAC addresses of the TG node
59 | ... | interfaces.
60 | ... | *[Ref] Applicable standard specifications:* RFC2544.
61
62 *** Variables ***
63 | ${avg_imix_framesize}= | ${357.833}
64 # X520-DA2 bandwidth limit
65 | ${s_limit} | ${10000000000}
66 # Traffic profile:
67 | ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
68 # LXC container
69 | ${container_count}= | ${1}
70 | ${container_engine}= | LXC
71 | ${container_image}= | ${EMPTY}
72 | ${container_install_dkms}= | ${FALSE}
73 | ${container_chain_topology}= | chain
74 # CPU settings
75 | ${system_cpus}= | ${1}
76 | ${vpp_cpus}= | ${5}
77 | ${container_cpus}= | ${5}
78
79 *** Keywords ***
80 | Local template
81 | | [Documentation]
82 | | ... | [Cfg] DUT runs L2XC switching config.
83 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
84 | | ... | [Ver] Find ${search_type} for ${framesize}B frames using binary search\
85 | | ... | start at linerate, step ${min_rate}pps.
86 | | ...
87 | | ... | *Arguments:*
88 | | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1).
89 | | ... | Type: integer, string
90 | | ... | - phy_cores - Number of physical cores. Type: integer
91 | | ... | - search_type - NDR or PDR. Type: string
92 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
93 | | ... | - min_rate - Min rate for binary search, default value: ${50000}.
94 | | ... | Type: integer
95 | | ...
96 | | [Arguments] | ${framesize} | ${phy_cores} | ${search_type}
97 | | ... | ${rxq}=${None} | ${min_rate}=${50000}
98 | | ...
99 | | Set Test Variable | ${framesize}
100 | | Set Test Variable | ${min_rate}
101 | | ${get_framesize}= | Set Variable If
102 | | ... | "${framesize}" == "IMIX_v4_1" | ${avg_imix_framesize} | ${framesize}
103 | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize}
104 | | ${binary_min}= | Set Variable | ${min_rate}
105 | | ${binary_max}= | Set Variable | ${max_rate}
106 | | ${threshold}= | Set Variable | ${min_rate}
107 | | Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
108 | | Add PCI devices to all DUTs
109 | | Run Keyword If | ${get_framesize} < ${1522} | Add No Multi Seg to all DUTs
110 | | Apply startup configuration on all VPP DUTs
111 | | Initialize L2 Bridge Domain for '1' memif pairs in 3-node circular topology
112 | | Run Keyword If | '${search_type}' == 'NDR'
113 | | ... | Find NDR using binary search and pps
114 | | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
115 | | ... | ${min_rate} | ${max_rate} | ${threshold}
116 | | ... | ELSE IF | '${search_type}' == 'PDR'
117 | | ... | Find PDR using binary search and pps
118 | | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
119 | | ... | ${min_rate} | ${max_rate} | ${threshold}
120 | | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
121
122 *** Test Cases ***
123 | tc01-64B-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrdisc
124 | | [Tags] | 64B | 1C | NDRDISC
125 | | framesize=${64} | phy_cores=${1} | search_type=NDR
126
127 | tc02-64B-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-pdrdisc
128 | | [Tags] | 64B | 1C | PDRDISC
129 | | framesize=${64} | phy_cores=${1} | search_type=PDR
130
131 | tc03-IMIX-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrdisc
132 | | [Tags] | IMIX | 1C | NDRDISC
133 | | framesize=IMIX_v4_1 | phy_cores=${1} | search_type=NDR
134
135 | tc04-IMIX-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-pdrdisc
136 | | [Tags] | IMIX | 1C | PDRDISC
137 | | framesize=IMIX_v4_1 | phy_cores=${1} | search_type=PDR
138
139 | tc05-1518B-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrdisc
140 | | [Tags] | 1518B | 1C | NDRDISC
141 | | framesize=${1518} | phy_cores=${1} | search_type=NDR
142
143 | tc06-1518B-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-pdrdisc
144 | | [Tags] | 1518B | 1C | PDRDISC
145 | | framesize=${1518} | phy_cores=${1} | search_type=PDR
146
147 | tc07-64B-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrdisc
148 | | [Tags] | 64B | 2C | NDRDISC
149 | | framesize=${64} | phy_cores=${2} | search_type=NDR
150
151 | tc08-64B-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-pdrdisc
152 | | [Tags] | 64B | 2C | PDRDISC
153 | | framesize=${64} | phy_cores=${2} | search_type=PDR
154
155 | tc09-IMIX-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrdisc
156 | | [Tags] | IMIX | 2C | NDRDISC
157 | | framesize=IMIX_v4_1 | phy_cores=${2} | search_type=NDR
158
159 | tc10-IMIX-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-pdrdisc
160 | | [Tags] | IMIX | 2C | PDRDISC
161 | | framesize=IMIX_v4_1 | phy_cores=${2} | search_type=PDR
162
163 | tc11-1518B-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrdisc
164 | | [Tags] | 1518B | 2C | NDRDISC
165 | | framesize=${1518} | phy_cores=${2} | search_type=NDR
166
167 | tc12-1518B-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-pdrdisc
168 | | [Tags] | 1518B | 2C | PDRDISC
169 | | framesize=${1518} | phy_cores=${2} | search_type=PDR