CSIT-1196: Add hsw/skx and 2n/3n to the report structure
[csit.git] / tests / vpp / perf / container_memif / 10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-ndrpdrdisc.robot
1 # Copyright (c) 2018 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/performance/performance_setup.robot
16 | ...
17 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
18 | ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | MEMIF | SINGLE_MEMIF | DOCKER
19 | ...
20 | Suite Setup | Run Keywords
21 | ... | Set up 3-node performance topology with DUT's NIC model | L2
22 | ... | Intel-X710
23 | ... | AND | Set up performance test suite with MEMIF
24 | ... | AND | Set up performance topology with containers
25 | ...
26 | Suite Teardown | Tear down 3-node performance topology with container
27 | ...
28 | Test Setup | Run Keywords
29 | ... | Set up performance test
30 | ... | AND | Restart VPP in all 'VNF' containers
31 | ...
32 | Test Teardown | Tear down performance discovery test | ${min_rate}pps
33 | ... | ${framesize} | ${traffic_profile}
34 | ...
35 | Test Template | Local template
36 | ...
37 | Documentation |  *Raw results L2XC test cases*
38 | ...
39 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
40 | ... | with single links between nodes.
41 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect.
42 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 configured with L2 cross-
43 | ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel.
44 | ... | Container is connected to VPP via Memif interface running same VPP
45 | ... | version as running on DUT. Resources are limited via cgroup to use 5
46 | ... | cores allocated from pool of isolated CPUs. There are no memory
47 | ... | contraints. Cross Horizontal topology with packets flowing via DUT (VPP)
48 | ... | to Container, then via horizontal memif to the next Container, and so on
49 | ... | until the last Container then to NIC (in last Container). Single
50 | ... | Container is supported as of now.
51 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
52 | ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
53 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage
54 | ... | of packets transmitted. NDR and PDR are discovered for different
55 | ... | Ethernet L2 frame sizes using either binary search or linear search
56 | ... | algorithms with configured starting rate and final step that determines
57 | ... | throughput measurement resolution. Test packets are generated by TG on
58 | ... | links to DUTs. TG traffic profile contains two L3 flow-groups
59 | ... | (flow-group per direction, 254 flows per flow-group) with all packets
60 | ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
61 | ... | payload. MAC addresses are matching MAC addresses of the TG node
62 | ... | interfaces.
63 | ... | *[Ref] Applicable standard specifications:* RFC2544.
64
65 *** Variables ***
66 # X710-DA2 bandwidth limit
67 | ${s_limit} | ${10000000000}
68 # Traffic profile
69 | ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
70 # Container settings
71 | ${container_count}= | ${1}
72 | ${container_engine}= | Docker
73 | ${container_image}= | ubuntu:xenial-20180412
74 | ${container_install_dkms}= | ${TRUE}
75 | ${container_chain_topology}= | cross_horiz
76 # CPU settings
77 | ${system_cpus}= | ${1}
78 | ${vpp_cpus}= | ${5}
79 | ${container_cpus}= | ${5}
80
81 *** Keywords ***
82 | Local template
83 | | [Documentation]
84 | | ... | [Cfg] DUT runs L2XC switching config.
85 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
86 | | ... | [Ver] Find ${search_type} for ${framesize}B frames using binary search\
87 | | ... | start at linerate, step ${min_rate}pps.
88 | | ...
89 | | ... | *Arguments:*
90 | | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1).
91 | | ... | Type: integer, string
92 | | ... | - phy_cores - Number of physical cores. Type: integer
93 | | ... | - search_type - NDR or PDR. Type: string
94 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
95 | | ... | - min_rate - Min rate for binary search, default value: ${50000}.
96 | | ... | Type: integer
97 | | ...
98 | | [Arguments] | ${framesize} | ${phy_cores} | ${search_type}
99 | | ... | ${rxq}=${None} | ${min_rate}=${50000}
100 | | ...
101 | | Set Test Variable | ${framesize}
102 | | Set Test Variable | ${min_rate}
103 | | ${get_framesize}= | Get Frame Size | ${framesize}
104 | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize}
105 | | ${binary_min}= | Set Variable | ${min_rate}
106 | | ${binary_max}= | Set Variable | ${max_rate}
107 | | ${threshold}= | Set Variable | ${min_rate}
108 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
109 | | And Add single PCI device to all DUTs
110 | | And Run Keyword If | ${get_framesize} < ${1522}
111 | | ... | Add no multi seg to all DUTs
112 | | And Apply startup configuration on all VPP DUTs
113 | | And Initialize L2 xconnect for single memif in 3-node circular topology
114 | | Then Run Keyword If | '${search_type}' == 'NDR'
115 | | ... | Find NDR using binary search and pps
116 | | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
117 | | ... | ${min_rate} | ${max_rate} | ${threshold}
118 | | ... | ELSE IF | '${search_type}' == 'PDR'
119 | | ... | Find PDR using binary search and pps
120 | | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
121 | | ... | ${min_rate} | ${max_rate} | ${threshold}
122 | | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
123
124 *** Test Cases ***
125 | tc01-64B-1t1c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc
126 | | [Tags] | 64B | 1C | NDRDISC
127 | | framesize=${64} | phy_cores=${1} | search_type=NDR
128
129 | tc02-64B-1t1c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc
130 | | [Tags] | 64B | 1C | PDRDISC
131 | | framesize=${64} | phy_cores=${1} | search_type=PDR
132
133 | tc03-1518B-1t1c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc
134 | | [Tags] | 1518B | 1C | NDRDISC
135 | | framesize=${1518} | phy_cores=${1} | search_type=NDR
136
137 | tc04-1518B-1t1c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc
138 | | [Tags] | 1518B | 1C | PDRDISC
139 | | framesize=${1518} | phy_cores=${1} | search_type=PDR
140
141 | tc05-9000B-1t1c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc
142 | | [Tags] | 9000B | 1C | NDRDISC
143 | | framesize=${9000} | phy_cores=${1} | search_type=NDR
144
145 | tc06-9000B-1t1c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc
146 | | [Tags] | 9000B | 1C | PDRDISC
147 | | framesize=${9000} | phy_cores=${1} | search_type=PDR
148
149 | tc07-IMIX-1t1c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc
150 | | [Tags] | IMIX | 1C | NDRDISC
151 | | framesize=IMIX_v4_1 | phy_cores=${1} | search_type=NDR
152
153 | tc08-IMIX-1t1c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc
154 | | [Tags] | IMIX | 1C | PDRDISC
155 | | framesize=IMIX_v4_1 | phy_cores=${1} | search_type=PDR
156
157 | tc09-64B-2t2c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc
158 | | [Tags] | 64B | 2C | NDRDISC
159 | | framesize=${64} | phy_cores=${2} | search_type=NDR
160
161 | tc10-64B-2t2c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc
162 | | [Tags] | 64B | 1C | PDRDISC
163 | | framesize=${64} | phy_cores=${2} | search_type=PDR
164
165 | tc11-1518B-2t2c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc
166 | | [Tags] | 1518B | 2C | NDRDISC
167 | | framesize=${1518} | phy_cores=${2} | search_type=NDR
168
169 | tc12-1518B-2t2c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc
170 | | [Tags] | 1518B | 2C | PDRDISC
171 | | framesize=${1518} | phy_cores=${2} | search_type=PDR
172
173 | tc13-9000B-2t2c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc
174 | | [Tags] | 9000B | 2C | NDRDISC
175 | | framesize=${9000} | phy_cores=${2} | search_type=NDR
176
177 | tc14-9000B-2t2c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc
178 | | [Tags] | 9000B | 2C | PDRDISC
179 | | framesize=${9000} | phy_cores=${2} | search_type=PDR
180
181 | tc15-IMIX-2t2c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc
182 | | [Tags] | IMIX | 2C | NDRDISC
183 | | framesize=IMIX_v4_1 | phy_cores=${2} | search_type=NDR
184
185 | tc16-IMIX-2t2c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc
186 | | [Tags] | IMIX | 2C | PDRDISC
187 | | framesize=IMIX_v4_1 | phy_cores=${2} | search_type=PDR
188
189 | tc17-64B-4t4c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc
190 | | [Tags] | 64B | 4C | NDRDISC
191 | | framesize=${64} |  phy_cores=${4} | search_type=NDR
192
193 | tc18-64B-4t4c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc
194 | | [Tags] | 64B | 4C | PDRDISC
195 | | framesize=${64} |  phy_cores=${4} | search_type=PDR
196
197 | tc19-1518B-4t4c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc
198 | | [Tags] | 1518B | 4C | NDRDISC
199 | | framesize=${1518} |  phy_cores=${4} | search_type=NDR
200
201 | tc20-1518B-4t4c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc
202 | | [Tags] | 1518B | 4C | PDRDISC
203 | | framesize=${1518} |  phy_cores=${4} | search_type=PDR
204
205 | tc21-9000B-4t4c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc
206 | | [Tags] | 9000B | 4C | NDRDISC
207 | | framesize=${9000} |  phy_cores=${4} | search_type=NDR
208
209 | tc22-9000B-4t4c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc
210 | | [Tags] | 9000B | 4C | PDRDISC
211 | | framesize=${9000} |  phy_cores=${4} | search_type=PDR
212
213 | tc23-IMIX-4t4c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc
214 | | [Tags] | IMIX | 4C | NDRDISC
215 | | framesize=IMIX_v4_1 |  phy_cores=${4} | search_type=NDR
216
217 | tc24-IMIX-4t4c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc
218 | | [Tags] | IMIX | 4C | PDRDISC
219 | | framesize=IMIX_v4_1 | phy_cores=${4} | search_type=PDR