doc: fixing documentation structure
[csit.git] / tests / vpp / perf / container_memif / 10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot
1 # Copyright (c) 2021 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/shared/default.robot
16 |
17 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
18 | ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | MEMIF | DOCKER
19 | ... | DRV_VFIO_PCI
20 | ... | RXQ_SIZE_0 | TXQ_SIZE_0
21 | ... | eth-l2xcbase-eth-2memif-1dcr
22 |
23 | Suite Setup | Setup suite topology interfaces | performance
24 | Suite Teardown | Tear down suite | performance
25 | Test Setup | Setup test | performance
26 | Test Teardown | Tear down test | performance | container
27 |
28 | Test Template | Local Template
29 |
30 | Documentation | **RFC2544: Pkt throughput L2XC test cases**
31 | ... |
32 | ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
33 | ... | topology with single links between nodes.
34 | ... |
35 | ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect.
36 | ... |
37 | ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \
38 | ... | cross-connect. DUT1 and DUT2 tested with ${nic_name}.
39 | ... | Container is connected to VPP via Memif interface. Container is \
40 | ... | running same VPP version as running on DUT. Container is limited via \
41 | ... | use 3 cores allocated from pool of isolated CPUs. There are no memory \
42 | ... | no memory contraints.
43 | ... |
44 | ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
45 | ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
46 | ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
47 | ... | expressed in percentage of packets transmitted. NDR and PDR are \
48 | ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
49 | ... | library.
50 | ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
51 | ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \
52 | ... | flow-group) with all packets containing Ethernet header, IPv4 header \
53 | ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \
54 | ... | addresses of the TG node interfaces.
55
56 *** Variables ***
57 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
58 | ${crypto_type}= | ${None}
59 | ${nic_name}= | Intel-X710
60 | ${nic_driver}= | vfio-pci
61 | ${nic_rxq_size}= | 0
62 | ${nic_txq_size}= | 0
63 | ${nic_pfs}= | 2
64 | ${nic_vfs}= | 0
65 | ${osi_layer}= | L2
66 | ${overhead}= | ${0}
67 # Traffic profile:
68 | ${traffic_profile}= | trex-stl-3n-ethip4-ip4src254
69 # Container
70 | ${container_engine}= | Docker
71 | ${container_chain_topology}= | chain
72
73 *** Keywords ***
74 | Local Template
75 | | [Documentation]
76 | | ... | - **[Cfg]** DUT runs L2XC switching config. \
77 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
78 | | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
79 | |
80 | | ... | *Arguments:*
81 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
82 | | ... | Type: integer, string
83 | | ... | - phy_cores - Number of physical cores. Type: integer
84 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
85 | |
86 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
87 | |
88 | | Set Test Variable | \${frame_size}
89 | |
90 | | Given Set Max Rate And Jumbo
91 | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
92 | | And Pre-initialize layer driver | ${nic_driver}
93 | | And Apply startup configuration on all VPP DUTs
94 | | When Initialize layer driver | ${nic_driver}
95 | | And Initialize layer interface
96 | | And Start containers for test
97 | | And Initialize L2 xconnect with memif pairs
98 | | Then Find NDR and PDR intervals using optimized search
99
100 *** Test Cases ***
101 | 64B-1c-eth-l2xcbase-eth-2memif-1dcr-ndrpdr
102 | | [Tags] | 64B | 1C
103 | | frame_size=${64} | phy_cores=${1}
104
105 | 64B-2c-eth-l2xcbase-eth-2memif-1dcr-ndrpdr
106 | | [Tags] | 64B | 2C
107 | | frame_size=${64} | phy_cores=${2}
108
109 | 64B-4c-eth-l2xcbase-eth-2memif-1dcr-ndrpdr
110 | | [Tags] | 64B | 4C
111 | | frame_size=${64} | phy_cores=${4}
112
113 | 1518B-1c-eth-l2xcbase-eth-2memif-1dcr-ndrpdr
114 | | [Tags] | 1518B | 1C
115 | | frame_size=${1518} | phy_cores=${1}
116
117 | 1518B-2c-eth-l2xcbase-eth-2memif-1dcr-ndrpdr
118 | | [Tags] | 1518B | 2C
119 | | frame_size=${1518} | phy_cores=${2}
120
121 | 1518B-4c-eth-l2xcbase-eth-2memif-1dcr-ndrpdr
122 | | [Tags] | 1518B | 4C
123 | | frame_size=${1518} | phy_cores=${4}
124
125 | 9000B-1c-eth-l2xcbase-eth-2memif-1dcr-ndrpdr
126 | | [Tags] | 9000B | 1C
127 | | frame_size=${9000} | phy_cores=${1}
128
129 | 9000B-2c-eth-l2xcbase-eth-2memif-1dcr-ndrpdr
130 | | [Tags] | 9000B | 2C
131 | | frame_size=${9000} | phy_cores=${2}
132
133 | 9000B-4c-eth-l2xcbase-eth-2memif-1dcr-ndrpdr
134 | | [Tags] | 9000B | 4C
135 | | frame_size=${9000} | phy_cores=${4}
136
137 | IMIX-1c-eth-l2xcbase-eth-2memif-1dcr-ndrpdr
138 | | [Tags] | IMIX | 1C
139 | | frame_size=IMIX_v4_1 | phy_cores=${1}
140
141 | IMIX-2c-eth-l2xcbase-eth-2memif-1dcr-ndrpdr
142 | | [Tags] | IMIX | 2C
143 | | frame_size=IMIX_v4_1 | phy_cores=${2}
144
145 | IMIX-4c-eth-l2xcbase-eth-2memif-1dcr-ndrpdr
146 | | [Tags] | IMIX | 4C
147 | | frame_size=IMIX_v4_1 | phy_cores=${4}