Upgrade autogen to NICs and search types
[csit.git] / tests / vpp / perf / container_memif / 2n-10ge2p1x710-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr.robot
1 # Copyright (c) 2019 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/performance/performance_setup.robot
16 | ...
17 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
18 | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 4R2C
19 | ... | NF_DENSITY | CHAIN | NF_VPPIP4
20 | ...
21 | Suite Setup | Run Keywords
22 | ... | Set up 2-node performance topology with DUT's NIC model | L3
23 | ... | ${nic_name}
24 | ... | AND | Set up performance test suite with MEMIF
25 | Suite Teardown | Tear down 2-node performance topology
26 | ...
27 | Test Setup | Set up performance test
28 | Test Teardown | Run Keywords
29 | ... | Tear down performance test
30 | ... | AND | Tear down performance test with container
31 | ...
32 | Test Template | Local Template
33 | ...
34 | Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 4 chains
35 | ... | 8 docker container*
36 | ...
37 | ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
38 | ... | single links between nodes.
39 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
40 | ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
41 | ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
42 | ... | Container is connected to VPP via Memif interface. Container is running
43 | ... | same VPP version as running on DUT. Container is limited via cgroup to
44 | ... | use cores allocated from pool of isolated CPUs. There are no memory
45 | ... | contraints.
46 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
47 | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
48 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
49 | ... | of packets transmitted. NDR and PDR are discovered for different\
50 | ... | Ethernet L2 frame sizes using MLRsearch library.\
51 | ... | Test packets are generated by TG on links to DUTs. TG traffic profile
52 | ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
53 | ... | flow-group) with all packets containing Ethernet header, IPv4 header
54 | ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
55 | ... | addresses of the TG node interfaces.
56
57 *** Variables ***
58 | ${nic_name}= | Intel-X710
59 | ${overhead}= | ${0}
60 # Traffic profile:
61 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c2n
62 # Container
63 | ${container_engine}= | Docker
64 | ${container_chain_topology}= | chain_ip4
65
66 *** Keywords ***
67 | Local Template
68 | | [Documentation]
69 | | ... | [Cfg] DUT runs L2BD switching config.
70 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
71 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
72 | | ...
73 | | ... | *Arguments:*
74 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
75 | | ... | Type: integer, string
76 | | ... | - phy_cores - Number of physical cores. Type: integer
77 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
78 | | ...
79 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
80 | | ...
81 | | Set Test Variable | \${frame_size}
82 | | ...
83 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
84 | | And Add PCI devices to all DUTs
85 | | Set Max Rate And Jumbo And Handle Multi Seg
86 | | And Apply startup configuration on all VPP DUTs
87 | | And Set up performance test with containers
88 | | ... | nf_chains=${4} | nf_nodes=${2} | auto_scale=${False}
89 | | And Initialize L2 Bridge Domain for multiple chains with memif pairs
90 | | ... | nf_chains=${4} | nf_nodes=${2} | auto_scale=${False}
91 | | Then Find NDR and PDR intervals using optimized search
92
93 *** Test Cases ***
94 | tc01-64B-1c-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr
95 | | [Tags] | 64B | 1C
96 | | frame_size=${64} | phy_cores=${1}
97
98 | tc02-64B-2c-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr
99 | | [Tags] | 64B | 2C
100 | | frame_size=${64} | phy_cores=${2}
101
102 | tc03-64B-4c-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr
103 | | [Tags] | 64B | 4C
104 | | frame_size=${64} | phy_cores=${4}
105
106 | tc04-1518B-1c-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr
107 | | [Tags] | 1518B | 1C
108 | | frame_size=${1518} | phy_cores=${1}
109
110 | tc05-1518B-2c-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr
111 | | [Tags] | 1518B | 2C
112 | | frame_size=${1518} | phy_cores=${2}
113
114 | tc06-1518B-4c-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr
115 | | [Tags] | 1518B | 4C
116 | | frame_size=${1518} | phy_cores=${4}
117
118 | tc07-9000B-1c-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr
119 | | [Tags] | 9000B | 1C
120 | | frame_size=${9000} | phy_cores=${1}
121
122 | tc08-9000B-2c-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr
123 | | [Tags] | 9000B | 2C
124 | | frame_size=${9000} | phy_cores=${2}
125
126 | tc09-9000B-4c-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr
127 | | [Tags] | 9000B | 4C
128 | | frame_size=${9000} | phy_cores=${4}
129
130 | tc10-IMIX-1c-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr
131 | | [Tags] | IMIX | 1C
132 | | frame_size=IMIX_v4_1 | phy_cores=${1}
133
134 | tc11-IMIX-2c-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr
135 | | [Tags] | IMIX | 2C
136 | | frame_size=IMIX_v4_1 | phy_cores=${2}
137
138 | tc12-IMIX-4c-eth-l2bd-16memif-4chain-8dcr-vppip4-ndrpdr
139 | | [Tags] | IMIX | 4C
140 | | frame_size=IMIX_v4_1 | phy_cores=${4}