Remove lbdpdk perf tests
[csit.git] / tests / vpp / perf / crypto / 10ge2p1x553-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr.robot
1 # Copyright (c) 2019 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/performance/performance_setup.robot
16 | Resource | resources/libraries/robot/crypto/ipsec.robot
17 | ...
18 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
19 | ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X553 | BASE
20 | ...
21 | Suite Setup | Set up IPSec performance test suite | L3 | Intel-X553
22 | ... | SW_cryptodev
23 | ...
24 | Suite Teardown | Tear down 3-node performance topology
25 | ...
26 | Test Setup | Set up performance test
27 | ...
28 | Test Teardown | Tear down performance discovery test | ${min_rate}pps
29 | ... | ${framesize} | ${traffic_profile}
30 | ...
31 | Test Template | Local Template
32 | ...
33 | Documentation | *IPv4 IPsec tunnel mode performance test suite.*
34 | ...
35 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
36 | ... | with single links between nodes.
37 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
38 | ... | Eth-IPv4-IPSec on DUT1-DUT2
39 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW
40 | ... | crypto devices and multiple IPsec tunnels between them. DUTs get IPv4
41 | ... | traffic from TG, encrypt it and send to another DUT, where packets are
42 | ... | decrypted and sent back to TG.
43 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
44 | ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
45 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage
46 | ... | of packets transmitted. NDR and PDR are discovered for different
47 | ... | Ethernet L2 frame sizes using MLRsearch library.
48 | ... | Test packets are generated by TG on
49 | ... | links to DUTs. TG traffic profile contains two L3 flow-groups
50 | ... | (flow-group per direction, number of flows per flow-group equals to
51 | ... | number of IPSec tunnels) with all packets
52 | ... | containing Ethernet header, IPv4 header with IP protocol=61 and
53 | ... | static payload. MAC addresses are matching MAC addresses of the TG
54 | ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
55 | ... | is applied to both streams.
56 | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
57
58 *** Variables ***
59 # X553 bandwidth limit 20Gbps/2=10Gbps
60 | ${s_10G}= | ${10000000000}
61 # X553 Mpps limit 29.76Mpps/2=14.88Mpps
62 | ${s_14.88Mpps}= | ${14880952}
63 | ${tg_if1_ip4}= | 192.168.10.2
64 | ${dut1_if1_ip4}= | 192.168.10.1
65 | ${dut1_if2_ip4}= | 172.168.1.1
66 | ${dut2_if1_ip4}= | 172.168.1.2
67 | ${dut2_if2_ip4}= | 192.168.20.1
68 | ${tg_if2_ip4}= | 192.168.20.2
69 | ${raddr_ip4}= | 20.0.0.0
70 | ${laddr_ip4}= | 10.0.0.0
71 | ${addr_range}= | ${32}
72 | ${overhead}= | ${54}
73 | ${n_tunnels}= | ${1}
74 # Traffic profile:
75 | ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}
76
77 *** Keywords ***
78 | Local Template
79 | | [Documentation]
80 | | ... | [Cfg] DUT runs IPSec tunneling AES GCM config.
81 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
82 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
83 | | ...
84 | | ... | *Arguments:*
85 | | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1).
86 | | ... | Type: integer, string
87 | | ... | - phy_cores - Number of physical cores. Type: integer
88 | | ... | - search_type - NDR or PDR. Type: string
89 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
90 | | ... | - min_rate - Min rate for binary search, default value: ${50000}.
91 | | ... | Type: integer
92 | | ...
93 | | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
94 | | ...
95 | | Set Test Variable | ${framesize}
96 | | Set Test Variable | ${min_rate} | ${10000}
97 | | ${encr_alg} = | Crypto Alg AES GCM 128
98 | | ${auth_alg} = | Integ Alg AES GCM 128
99 | | ${ipsec_proto} = | IPsec Proto ESP
100 | | ...
101 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
102 | | And Add PCI devices to all DUTs
103 | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
104 | | ... | ${s_10G} | ${framesize} | overhead=${overhead}
105 | | ... | pps_limit=${s_14.88Mpps}
106 | | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology
107 | | ... | aesni_gcm | ${phy_cores}
108 | | And Add DPDK dev default RXD to all DUTs | 2048
109 | | And Add DPDK dev default TXD to all DUTs | 2048
110 | | And Apply startup configuration on all VPP DUTs
111 | | When Generate keys for IPSec | ${encr_alg} | ${auth_alg}
112 | | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1}
113 | | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1}
114 | | And VPP IPsec Backend Dump | ${dut1}
115 | | And VPP IPsec Backend Dump | ${dut2}
116 | | And Initialize IPSec in 3-node circular topology
117 | | And Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | gateway=${dut2_if1_ip4}
118 | | ... | interface=${dut1_if2}
119 | | And Vpp Route Add | ${dut2} | ${laddr_ip4} | 8 | gateway=${dut1_if2_ip4}
120 | | ... | interface=${dut2_if1}
121 | | And VPP IPsec Add Multiple Tunnels
122 | | ... | ${dut1} | ${dut2} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels}
123 | | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key}
124 | | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${laddr_ip4} | ${raddr_ip4}
125 | | ... | ${addr_range}
126 | | Then Find NDR and PDR intervals using optimized search
127 | | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate}
128
129 *** Test Cases ***
130 | tc01-64B-1c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr
131 | | [Tags] | 64B | 1C
132 | | framesize=${64} | phy_cores=${1}
133
134 | tc02-64B-2c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr
135 | | [Tags] | 64B | 2C
136 | | framesize=${64} | phy_cores=${2}
137
138 | tc03-64B-4c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr
139 | | [Tags] | 64B | 4C
140 | | framesize=${64} | phy_cores=${4}
141
142 | tc04-1518B-1c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr
143 | | [Tags] | 1518B | 1C
144 | | framesize=${1518} | phy_cores=${1}
145
146 | tc05-1518B-2c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr
147 | | [Tags] | 1518B | 2C
148 | | framesize=${1518} | phy_cores=${2}
149
150 | tc06-1518B-4c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr
151 | | [Tags] | 1518B | 4C
152 | | framesize=${1518} | phy_cores=${4}
153
154 | tc07-9000B-1c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr
155 | | [Tags] | 9000B | 1C
156 | | framesize=${9000} | phy_cores=${1}
157
158 | tc08-9000B-2c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr
159 | | [Tags] | 9000B | 2C
160 | | framesize=${9000} | phy_cores=${2}
161
162 | tc09-9000B-4c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr
163 | | [Tags] | 9000B | 4C
164 | | framesize=${9000} | phy_cores=${4}
165
166 | tc10-IMIX-1c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr
167 | | [Tags] | IMIX | 1C
168 | | framesize=IMIX_v4_1 | phy_cores=${1}
169
170 | tc11-IMIX-2c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr
171 | | [Tags] | IMIX | 2C
172 | | framesize=IMIX_v4_1 | phy_cores=${2}
173
174 | tc12-IMIX-4c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr
175 | | [Tags] | IMIX | 4C
176 | | framesize=IMIX_v4_1 | phy_cores=${4}