Update VPP_STABLE_VER files
[csit.git] / tests / vpp / perf / crypto / 10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot
1 # Copyright (c) 2021 Cisco and/or its affiliates.
2 # Copyright (c) 2021 Intel and/or its affiliates.
3 # Licensed under the Apache License, Version 2.0 (the "License");
4 # you may not use this file except in compliance with the License.
5 # You may obtain a copy of the License at:
6 #
7 #     http://www.apache.org/licenses/LICENSE-2.0
8 #
9 # Unless required by applicable law or agreed to in writing, software
10 # distributed under the License is distributed on an "AS IS" BASIS,
11 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12 # See the License for the specific language governing permissions and
13 # limitations under the License.
14
15 *** Settings ***
16 | Resource | resources/libraries/robot/shared/default.robot
17 | Resource | resources/libraries/robot/crypto/ipsec.robot
18 |
19 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR
20 | ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECTUN | NIC_Intel-X710 | TNL_1000
21 | ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI
22 | ... | RXQ_SIZE_0 | TXQ_SIZE_0
23 | ... | ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha
24 |
25 | Suite Setup | Setup suite topology interfaces | performance | ipsechw
26 | Suite Teardown | Tear down suite | performance
27 | Test Setup | Setup test | performance
28 | Test Teardown | Tear down test | performance | ipsec_sa
29 |
30 | Test Template | Local Template
31 |
32 | Documentation | *IPv4 IPsec tunnel mode performance test suite.*
33 |
34 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
35 | ... | with single links between nodes.
36 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
37 | ... | Eth-IPv4-IPSec on DUT1-DUT2
38 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple
39 | ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it
40 | ... | and send to another DUT, where packets are decrypted and sent back to TG
41 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
42 | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
43 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
44 | ... | of packets transmitted. NDR and PDR are discovered for different\
45 | ... | Ethernet L2 frame sizes using MLRsearch library.\
46 | ... | Test packets are generated by TG on
47 | ... | links to DUTs. TG traffic profile contains two L3 flow-groups
48 | ... | (flow-group per direction, number of flows per flow-group equals to
49 | ... | number of IPSec tunnels) with all packets
50 | ... | containing Ethernet header, IPv4 header with IP protocol=61 and
51 | ... | static payload. MAC addresses are matching MAC addresses of the TG
52 | ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
53 | ... | is applied to both streams.
54 | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
55
56 *** Variables ***
57 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
58 | ... | crypto_native_plugin.so
59 | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
60 | ${crypto_type}= | HW_DH895xcc
61 | ${nic_name}= | Intel-X710
62 | ${nic_driver}= | vfio-pci
63 | ${nic_rxq_size}= | 0
64 | ${nic_txq_size}= | 0
65 | ${nic_pfs}= | 2
66 | ${nic_vfs}= | 0
67 | ${osi_layer}= | L3
68 | ${overhead}= | ${78}
69 | ${tg_if1_ip4}= | 192.168.10.2
70 | ${dut1_if1_ip4}= | 192.168.10.1
71 | ${dut1_if2_ip4}= | 100.0.0.1
72 | ${dut2_if1_ip4}= | 100.0.0.2
73 | ${dut2_if2_ip4}= | 192.168.20.1
74 | ${tg_if2_ip4}= | 192.168.20.2
75 | ${raddr_ip4}= | 20.0.0.0
76 | ${laddr_ip4}= | 10.0.0.0
77 | ${addr_range}= | ${24}
78 | ${n_tunnels}= | ${1000}
79 # Traffic profile:
80 | ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}
81
82 *** Keywords ***
83 | Local Template
84 | | [Documentation]
85 | | ... | [Cfg] DUTs runs IPsec tunneling AES_128_CBC / HMAC_SHA_512 config.\
86 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
87 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
88 | |
89 | | ... | *Arguments:*
90 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
91 | | ... | Type: integer, string
92 | | ... | - phy_cores - Number of physical cores. Type: integer
93 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
94 | |
95 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
96 | |
97 | | Set Test Variable | \${frame_size}
98 | |
99 | | # These are enums (not strings) so they cannot be in Variables table.
100 | | ${encr_alg}= | Crypto Alg AES CBC 128
101 | | ${auth_alg}= | Integ Alg SHA 512 256
102 | |
103 | | Given Set Max Rate And Jumbo
104 | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
105 | | And Pre-initialize layer driver | ${nic_driver}
106 | | And Apply startup configuration on all VPP DUTs
107 | | When Initialize layer driver | ${nic_driver}
108 | | And Initialize layer interface
109 | | And Enable IPSec Async Mode on all VPP DUTs
110 | | And Initialize IPSec in 3-node circular topology
111 | | And VPP IPsec Add Multiple Tunnels
112 | | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] | ${n_tunnels}
113 | | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4}
114 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
115 | | Then Find NDR and PDR intervals using optimized search
116
117 *** Test Cases ***
118 | 64B-1c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr
119 | | [Tags] | 64B | 1C
120 | | frame_size=${64} | phy_cores=${1}
121
122 | 64B-2c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr
123 | | [Tags] | 64B | 2C
124 | | frame_size=${64} | phy_cores=${2}
125
126 | 64B-4c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr
127 | | [Tags] | 64B | 4C
128 | | frame_size=${64} | phy_cores=${4}
129
130 | 1518B-1c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr
131 | | [Tags] | 1518B | 1C
132 | | frame_size=${1518} | phy_cores=${1}
133
134 | 1518B-2c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr
135 | | [Tags] | 1518B | 2C
136 | | frame_size=${1518} | phy_cores=${2}
137
138 | 1518B-4c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr
139 | | [Tags] | 1518B | 4C
140 | | frame_size=${1518} | phy_cores=${4}
141
142 | 9000B-1c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr
143 | | [Tags] | 9000B | 1C
144 | | frame_size=${9000} | phy_cores=${1}
145
146 | 9000B-2c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr
147 | | [Tags] | 9000B | 2C
148 | | frame_size=${9000} | phy_cores=${2}
149
150 | 9000B-4c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr
151 | | [Tags] | 9000B | 4C
152 | | frame_size=${9000} | phy_cores=${4}
153
154 | IMIX-1c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr
155 | | [Tags] | IMIX | 1C
156 | | frame_size=IMIX_v4_1 | phy_cores=${1}
157
158 | IMIX-2c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr
159 | | [Tags] | IMIX | 2C
160 | | frame_size=IMIX_v4_1 | phy_cores=${2}
161
162 | IMIX-4c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr
163 | | [Tags] | IMIX | 4C
164 | | frame_size=IMIX_v4_1 | phy_cores=${4}