IPsec: add nth SPD entry outbound flow cache TCs
[csit.git] / tests / vpp / perf / crypto / 10ge2p1x710-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot
1 # Copyright (c) 2021 PANTHEON.tech s.r.o.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/shared/default.robot
16 | Resource | resources/libraries/robot/crypto/ipsec.robot
17 |
18 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | IP4FWD
19 | ... | BASE | IPSEC | IPSECSW | IPSECSPD | SPD_OUTBOUND | SPD_FLOW_CACHE
20 | ... | SPE_1 | NOCRYPTO
21 | ... | NIC_Intel-X710 | DRV_VFIO_PCI | RXQ_SIZE_0 | TXQ_SIZE_0
22 | ... | ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto
23 |
24 | Suite Setup | Setup suite topology interfaces | performance
25 | Suite Teardown | Tear down suite | performance
26 | Test Setup | Setup test | performance
27 | Test Teardown | Tear down test | performance
28 |
29 | Test Template | Local Template
30 |
31 | Documentation | *RFC4301: SPD lookup performance*
32 |
33 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
34 | ... | with single links between nodes.
35 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
36 | ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing, two
37 | ... | static IPv4 /24 route entries, one SPD on each outbound interface in
38 | ... | each direction and ${rule amount} SPD entry(ies) in each SPD. Only
39 | ... | outbound traffic is matched and only the last rule is the matching
40 | ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled.
41 | ... | DUT1 tested with ${nic_name}.\
42 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
43 | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
44 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
45 | ... | of packets transmitted. NDR and PDR are discovered for different\
46 | ... | Ethernet L2 frame sizes using MLRsearch library.\
47 | ... | Test packets are generated by TG on links to DUTs. TG traffic profile
48 | ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
49 | ... | flow-group) with all packets containing Ethernet header, IPv4 header
50 | ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
51 | ... | addresses of the TG node interfaces. The DUT does SPD lookup with only
52 | ... | the lowest priority rule matching the traffic. The action of the
53 | ... | matching rule is BYPASS. No encryption or authentication is done.
54 | ... | *[Ref] Applicable standard specifications:* RFC4301 and RFC2544.
55
56 *** Variables ***
57 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
58 | ${crypto_type}= | ${None}
59 | ${nic_name}= | Intel-X710
60 | ${nic_driver}= | vfio-pci
61 | ${nic_rxq_size}= | 0
62 | ${nic_txq_size}= | 0
63 | ${nic_pfs}= | 2
64 | ${nic_vfs}= | 0
65 | ${osi_layer}= | L3
66 | ${overhead}= | ${0}
67 | ${remote_addr_range_ip4}= | 20.20.20.0/24
68 | ${local_addr_range_ip4}= | 10.10.10.0/24
69 | ${rule_amount}= | ${1}
70 # Traffic profile
71 | ${traffic_profile}= | trex-stl-2n-ethip4-ip4src253
72
73 *** Keywords ***
74 | Local Template
75 | | [Documentation]
76 | | ... | [Cfg] DUT runs IPv4 routing config with IPsec SPD rules.\
77 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
78 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
79 | |
80 | | ... | *Arguments:*
81 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
82 | | ... | Type: integer, string
83 | | ... | - phy_cores - Number of physical cores. Type: integer
84 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
85 | |
86 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
87 | |
88 | | Set Test Variable | \${frame_size}
89 | |
90 | | Given Set Max Rate And Jumbo
91 | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
92 | | And Pre-initialize layer driver | ${nic_driver}
93 | | And Enable SPD flow cache IPv4 Outbound
94 | | And Apply startup configuration on all VPP DUTs
95 | | When Initialize layer driver | ${nic_driver}
96 | | And Initialize layer interface
97 | | And Initialize IPv4 forwarding in circular topology
98 | | And VPP IPsec create SPDs match nth entry
99 | | ... | ${dut1} | ${DUT1_${int}2}[0] | ${DUT1_${int}1}[0] | ${rule_amount}
100 | | ... | ${local_addr_range_ip4} | ${remote_addr_range_ip4}
101 | | Then Find NDR and PDR intervals using optimized search
102
103 *** Test Cases ***
104 | 64B-1c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
105 | | [Tags] | 64B | 1C
106 | | frame_size=${64} | phy_cores=${1}
107
108 | 64B-2c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
109 | | [Tags] | 64B | 2C
110 | | frame_size=${64} | phy_cores=${2}
111
112 | 64B-4c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
113 | | [Tags] | 64B | 4C
114 | | frame_size=${64} | phy_cores=${4}
115
116 | 1518B-1c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
117 | | [Tags] | 1518B | 1C
118 | | frame_size=${1518} | phy_cores=${1}
119
120 | 1518B-2c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
121 | | [Tags] | 1518B | 2C
122 | | frame_size=${1518} | phy_cores=${2}
123
124 | 1518B-4c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
125 | | [Tags] | 1518B | 4C
126 | | frame_size=${1518} | phy_cores=${4}
127
128 | 9000B-1c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
129 | | [Tags] | 9000B | 1C
130 | | frame_size=${9000} | phy_cores=${1}
131
132 | 9000B-2c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
133 | | [Tags] | 9000B | 2C
134 | | frame_size=${9000} | phy_cores=${2}
135
136 | 9000B-4c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
137 | | [Tags] | 9000B | 4C
138 | | frame_size=${9000} | phy_cores=${4}
139
140 | IMIX-1c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
141 | | [Tags] | IMIX | 1C
142 | | frame_size=IMIX_v4_1 | phy_cores=${1}
143
144 | IMIX-2c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
145 | | [Tags] | IMIX | 2C
146 | | frame_size=IMIX_v4_1 | phy_cores=${2}
147
148 | IMIX-4c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr
149 | | [Tags] | IMIX | 4C
150 | | frame_size=IMIX_v4_1 | phy_cores=${4}