Python3: resources and libraries
[csit.git] / tests / vpp / perf / crypto / 10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot
1 # Copyright (c) 2019 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/shared/default.robot
16 | Resource | resources/libraries/robot/crypto/ipsec.robot
17 |
18 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_20000
19 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE
20 | ... | AES_128_GCM | AES | DRV_VFIO_PCI
21 |
22 | Suite Setup | Setup suite single link | performance
23 | Suite Teardown | Tear down suite | performance
24 | Test Setup | Setup test
25 | Test Teardown | Tear down test | performance
26 |
27 | Test Template | Local Template
28 |
29 | Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
30 |
31 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
32 | ... | with single links between nodes.
33 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
34 | ... | Eth-IPv4-IPSec on DUT1-DUT2
35 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\
36 | ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\
37 | ... | and send to another DUT, where packets are decrypted and sent back to TG
38 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
39 | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
40 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
41 | ... | of packets transmitted. NDR and PDR are discovered for different\
42 | ... | Ethernet L2 frame sizes using MLRsearch library.\
43 | ... | Test packets are generated by TG on
44 | ... | links to DUTs. TG traffic profile contains two L3 flow-groups
45 | ... | (flow-group per direction, number of flows per flow-group equals to
46 | ... | number of IPSec tunnels) with all packets
47 | ... | containing Ethernet header, IPv4 header with IP protocol=61 and
48 | ... | static payload. MAC addresses are matching MAC addresses of the TG
49 | ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
50 | ... | is applied to both streams.
51 | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
52
53 *** Variables ***
54 | @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
55 | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
56 | ${crypto_type}= | ${None}
57 | ${nic_name}= | Intel-X710
58 | ${nic_driver}= | vfio-pci
59 | ${osi_layer}= | L3
60 | ${overhead}= | ${54}
61 | ${tg_if1_ip4}= | 192.168.10.2
62 | ${dut1_if1_ip4}= | 192.168.10.1
63 | ${dut1_if2_ip4}= | 100.0.0.1
64 | ${dut2_if1_ip4}= | 200.0.0.2
65 | ${dut2_if2_ip4}= | 192.168.20.1
66 | ${tg_if2_ip4}= | 192.168.20.2
67 | ${raddr_ip4}= | 20.0.0.0
68 | ${laddr_ip4}= | 10.0.0.0
69 | ${addr_range}= | ${24}
70 | ${n_tunnels}= | ${20000}
71 # Traffic profile:
72 | ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}
73
74 *** Keywords ***
75 | Local Template
76 | | [Documentation]
77 | | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.
78 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
79 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
80 | |
81 | | ... | *Arguments:*
82 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
83 | | ... | Type: integer, string
84 | | ... | - phy_cores - Number of physical cores. Type: integer
85 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
86 | |
87 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
88 | |
89 | | Set Test Variable | \${frame_size}
90 | |
91 | | # These are enums (not strings) so they cannot be in Variables table.
92 | | ${encr_alg}= | Crypto Alg AES GCM 128
93 | | ${auth_alg}= | Set Variable | ${NONE}
94 | |
95 | | Given Set Max Rate And Jumbo
96 | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
97 | | And Pre-initialize layer driver | ${nic_driver}
98 | | And Apply startup configuration on all VPP DUTs
99 | | When Initialize layer driver | ${nic_driver}
100 | | And Initialize layer interface
101 | | And Initialize IPSec in 3-node circular topology
102 | | And VPP IPsec Create Tunnel Interfaces
103 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
104 | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg}
105 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
106 | | Then Find NDR and PDR intervals using optimized search
107
108 *** Test Cases ***
109 | tc01-64B-1c-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-ndrpdr
110 | | [Tags] | 64B | 1C
111 | | frame_size=${64} | phy_cores=${1}
112
113 | tc02-64B-2c-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-ndrpdr
114 | | [Tags] | 64B | 2C
115 | | frame_size=${64} | phy_cores=${2}
116
117 | tc03-64B-4c-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-ndrpdr
118 | | [Tags] | 64B | 4C
119 | | frame_size=${64} | phy_cores=${4}
120
121 | tc04-1518B-1c-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-ndrpdr
122 | | [Tags] | 1518B | 1C
123 | | frame_size=${1518} | phy_cores=${1}
124
125 | tc05-1518B-2c-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-ndrpdr
126 | | [Tags] | 1518B | 2C
127 | | frame_size=${1518} | phy_cores=${2}
128
129 | tc06-1518B-4c-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-ndrpdr
130 | | [Tags] | 1518B | 4C
131 | | frame_size=${1518} | phy_cores=${4}
132
133 | tc10-IMIX-1c-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-ndrpdr
134 | | [Tags] | IMIX | 1C
135 | | frame_size=IMIX_v4_1 | phy_cores=${1}
136
137 | tc11-IMIX-2c-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-ndrpdr
138 | | [Tags] | IMIX | 2C
139 | | frame_size=IMIX_v4_1 | phy_cores=${2}
140
141 | tc12-IMIX-4c-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-ndrpdr
142 | | [Tags] | IMIX | 4C
143 | | frame_size=IMIX_v4_1 | phy_cores=${4}