style(ipsec): add type hints to IPsecUtil
[csit.git] / tests / vpp / perf / crypto / 10ge2p1x710-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot
1 # Copyright (c) 2024 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/shared/default.robot
16 |
17 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_4
18 | ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X710 | SCALE
19 | ... | AES_256_GCM | AES | DRV_VFIO_PCI
20 | ... | RXQ_SIZE_0 | TXQ_SIZE_0
21 | ... | ethip4ipsec4tnlsw-ip4base-policy-aes256gcm
22 |
23 | Suite Setup | Setup suite topology interfaces | performance
24 | Suite Teardown | Tear down suite | performance
25 | Test Setup | Setup test | performance
26 | Test Teardown | Tear down test | performance | ipsec_all
27 |
28 | Test Template | Local Template
29 |
30 | Documentation | **IPv4 IPsec tunnel mode performance test suite.**
31 | ... |
32 | ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
33 | ... | topology with single links between nodes.
34 | ... |
35 | ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
36 | ... | Eth-IPv4-IPSec on DUT1-DUT2.
37 | ... |
38 | ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
39 | ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
40 | ... | encrypt it and send to another DUT, where packets are decrypted and \
41 | ... | sent back to TG.
42 | ... |
43 | ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
44 | ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
45 | ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
46 | ... | expressed in percentage of packets transmitted. NDR and PDR are \
47 | ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
48 | ... | library.
49 | ... | Test packets are generated by TG on \
50 | ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
51 | ... | (flow-group per direction, number of flows per flow-group equals to \
52 | ... | number of IPSec tunnels) with all packets \
53 | ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
54 | ... | static payload. MAC addresses are matching MAC addresses of the TG \
55 | ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
56 | ... | is applied to both streams.
57 | ... |
58 | ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
59
60 *** Variables ***
61 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
62 | ... | crypto_native_plugin.so
63 | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
64 | ${crypto_type}= | ${None}
65 | ${nic_name}= | Intel-X710
66 | ${nic_driver}= | vfio-pci
67 | ${nic_rxq_size}= | 0
68 | ${nic_txq_size}= | 0
69 | ${nic_pfs}= | 2
70 | ${nic_vfs}= | 0
71 | ${osi_layer}= | L3
72 | ${overhead}= | ${54}
73 | ${tg_if1_ip4}= | 192.168.10.254
74 | ${dut1_if1_ip4}= | 192.168.10.11
75 | ${dut1_if2_ip4}= | 100.0.0.1
76 | ${dut2_if1_ip4}= | 200.0.0.102
77 | ${dut2_if2_ip4}= | 192.168.20.11
78 | ${tg_if2_ip4}= | 192.168.20.254
79 | ${raddr_ip4}= | 20.0.0.0
80 | ${laddr_ip4}= | 10.0.0.0
81 | ${addr_range}= | ${24}
82 | ${n_tunnels}= | ${4}
83 # Traffic profile:
84 | ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}
85
86 *** Keywords ***
87 | Local Template
88 | | [Documentation]
89 | | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \
90 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
91 | | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
92 | |
93 | | ... | *Arguments:*
94 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
95 | | ... | Type: integer, string
96 | | ... | - phy_cores - Number of physical cores. Type: integer
97 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
98 | |
99 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
100 | |
101 | | Set Test Variable | \${frame_size}
102 | |
103 | | # These are enums (not strings) so they cannot be in Variables table.
104 | | ${encr_alg}= | Crypto Alg AES GCM 256
105 | | ${auth_alg}= | Set Variable | ${NONE}
106 | | ${ipsec_proto}= | IPsec Proto ESP
107 | |
108 | | Given Set Max Rate And Jumbo
109 | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
110 | | And Pre-initialize layer driver | ${nic_driver}
111 | | And Apply startup configuration on all VPP DUTs
112 | | When Initialize layer driver | ${nic_driver}
113 | | And Initialize layer interface
114 | | And Initialize IPSec in 3-node circular topology
115 | | And VPP IPsec Add Multiple Tunnels
116 | | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] | ${n_tunnels}
117 | | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4}
118 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
119 | | Then Find NDR and PDR intervals using optimized search
120
121 *** Test Cases ***
122 | 64B-1c-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-ndrpdr
123 | | [Tags] | 64B | 1C
124 | | frame_size=${64} | phy_cores=${1}
125
126 | 64B-2c-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-ndrpdr
127 | | [Tags] | 64B | 2C
128 | | frame_size=${64} | phy_cores=${2}
129
130 | 64B-4c-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-ndrpdr
131 | | [Tags] | 64B | 4C
132 | | frame_size=${64} | phy_cores=${4}
133
134 | 1518B-1c-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-ndrpdr
135 | | [Tags] | 1518B | 1C
136 | | frame_size=${1518} | phy_cores=${1}
137
138 | 1518B-2c-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-ndrpdr
139 | | [Tags] | 1518B | 2C
140 | | frame_size=${1518} | phy_cores=${2}
141
142 | 1518B-4c-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-ndrpdr
143 | | [Tags] | 1518B | 4C
144 | | frame_size=${1518} | phy_cores=${4}
145
146 | 9000B-1c-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-ndrpdr
147 | | [Tags] | 9000B | 1C
148 | | frame_size=${9000} | phy_cores=${1}
149
150 | 9000B-2c-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-ndrpdr
151 | | [Tags] | 9000B | 2C
152 | | frame_size=${9000} | phy_cores=${2}
153
154 | 9000B-4c-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-ndrpdr
155 | | [Tags] | 9000B | 4C
156 | | frame_size=${9000} | phy_cores=${4}
157
158 | IMIX-1c-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-ndrpdr
159 | | [Tags] | IMIX | 1C
160 | | frame_size=IMIX_v4_1 | phy_cores=${1}
161
162 | IMIX-2c-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-ndrpdr
163 | | [Tags] | IMIX | 2C
164 | | frame_size=IMIX_v4_1 | phy_cores=${2}
165
166 | IMIX-4c-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-ndrpdr
167 | | [Tags] | IMIX | 4C
168 | | frame_size=IMIX_v4_1 | phy_cores=${4}