Add test suites for crypto sw scheduler engine
[csit.git] / tests / vpp / perf / crypto / 10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot
1 # Copyright (c) 2021 Intel and/or its affiliates.
2 # Copyright (c) 2021 Cisco and/or its affiliates.
3 # Licensed under the Apache License, Version 2.0 (the "License");
4 # you may not use this file except in compliance with the License.
5 # You may obtain a copy of the License at:
6 #
7 #     http://www.apache.org/licenses/LICENSE-2.0
8 #
9 # Unless required by applicable law or agreed to in writing, software
10 # distributed under the License is distributed on an "AS IS" BASIS,
11 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12 # See the License for the specific language governing permissions and
13 # limitations under the License.
14
15 *** Settings ***
16 | Resource | resources/libraries/robot/shared/default.robot
17 | Resource | resources/libraries/robot/crypto/ipsec.robot
18 |
19 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR
20 | ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECINT | NIC_Intel-X710 | TNL_4
21 | ... | SCHEDULER | AES_256_GCM | AES | DRV_VFIO_PCI
22 | ... | RXQ_SIZE_0 | TXQ_SIZE_0
23 | ... | ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm
24 |
25 | Suite Setup | Setup suite topology interfaces | performance
26 | Suite Teardown | Tear down suite | performance
27 | Test Setup | Setup test | performance
28 | Test Teardown | Tear down test | performance | ipsec_sa
29 |
30 | Test Template | Local Template
31 |
32 | Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.*
33 |
34 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
35 | ... | with single links between nodes.
36 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
37 | ... | Eth-IPv4-IPSec on DUT1-DUT2
38 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple
39 | ... | IPsec tunnels between them, run with IPsec async mode and use crypto
40 | ... | sw scheduler engine to schedule crypto work to crypto cores. DUTs get
41 | ... | IPv4 traffic from TG, encrypt it and send to another DUT, where packets
42 | ... | are decrypted and sent back to TG.
43 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
44 | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
45 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
46 | ... | of packets transmitted. NDR and PDR are discovered for different\
47 | ... | Ethernet L2 frame sizes using MLRsearch library.\
48 | ... | Test packets are generated by TG on
49 | ... | links to DUTs. TG traffic profile contains two L3 flow-groups
50 | ... | (flow-group per direction, number of flows per flow-group equals to
51 | ... | number of IPSec tunnels) with all packets
52 | ... | containing Ethernet header, IPv4 header with IP protocol=61 and
53 | ... | static payload. MAC addresses are matching MAC addresses of the TG
54 | ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
55 | ... | is applied to both streams.
56 | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
57
58 *** Variables ***
59 | @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so
60 | ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so
61 | ... | crypto_openssl_plugin.so
62 | ${crypto_type}= | ${None}
63 | ${nic_name}= | Intel-X710
64 | ${nic_driver}= | vfio-pci
65 | ${nic_rxq_size}= | 0
66 | ${nic_txq_size}= | 0
67 | ${nic_pfs}= | 2
68 | ${nic_vfs}= | 0
69 | ${osi_layer}= | L3
70 | ${overhead}= | ${54}
71 | ${tg_if1_ip4}= | 192.168.10.2
72 | ${dut1_if1_ip4}= | 192.168.10.1
73 | ${dut1_if2_ip4}= | 100.0.0.1
74 | ${dut2_if1_ip4}= | 200.0.0.2
75 | ${dut2_if2_ip4}= | 192.168.20.1
76 | ${tg_if2_ip4}= | 192.168.20.2
77 | ${raddr_ip4}= | 20.0.0.0
78 | ${laddr_ip4}= | 10.0.0.0
79 | ${addr_range}= | ${24}
80 | ${n_tunnels}= | ${4}
81 | ${dp_cores}= | ${1}
82 # Traffic profile:
83 | ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}
84
85 *** Keywords ***
86 | Local Template
87 | | [Documentation]
88 | | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\
89 | | ... | Each DUT uses one physical core for data plane workers
90 | | ... | and rest of ${phy_cores} physical core(s) for crypto workers.
91 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
92 | |
93 | | ... | *Arguments:*
94 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
95 | | ... | Type: integer, string
96 | | ... | - phy_cores - Total number of physical cores. Type: integer
97 | | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer
98 | |
99 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${1}
100 | |
101 | | Set Test Variable | \${frame_size}
102 | |
103 | | # These are enums (not strings) so they cannot be in Variables table.
104 | | ${encr_alg}= | Crypto Alg AES GCM 256
105 | | ${auth_alg}= | Set Variable | ${NONE}
106 | |
107 | | Given Set Max Rate And Jumbo
108 | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
109 | | And Pre-initialize layer driver | ${nic_driver}
110 | | And Apply startup configuration on all VPP DUTs
111 | | When Initialize layer driver | ${nic_driver}
112 | | And Initialize layer interface
113 | | And Enable IPSec Async Mode on all VPP DUTs
114 | | And Disable Crypto Work of VPP Worker Threads on all VPP DUTs | ${dp_cores}
115 | | And Initialize IPSec in 3-node circular topology
116 | | And VPP IPsec Create Tunnel Interfaces
117 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
118 | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
119 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
120 | | Then Find NDR and PDR intervals using optimized search
121
122 *** Test Cases ***
123 | 64B-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr
124 | | [Tags] | 64B | 2C
125 | | frame_size=${64} | phy_cores=${2}
126
127 | 64B-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr
128 | | [Tags] | 64B | 3C
129 | | frame_size=${64} | phy_cores=${3}
130
131 | 64B-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr
132 | | [Tags] | 64B | 4C
133 | | frame_size=${64} | phy_cores=${4}
134
135 | 1518B-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr
136 | | [Tags] | 1518B | 2C
137 | | frame_size=${1518} | phy_cores=${2}
138
139 | 1518B-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr
140 | | [Tags] | 1518B | 3C
141 | | frame_size=${1518} | phy_cores=${3}
142
143 | 1518B-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr
144 | | [Tags] | 1518B | 4C
145 | | frame_size=${1518} | phy_cores=${4}
146
147 | 9000B-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr
148 | | [Tags] | 9000B | 2C
149 | | frame_size=${9000} | phy_cores=${2}
150
151 | 9000B-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr
152 | | [Tags] | 9000B | 3C
153 | | frame_size=${9000} | phy_cores=${3}
154
155 | 9000B-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr
156 | | [Tags] | 9000B | 4C
157 | | frame_size=${9000} | phy_cores=${4}
158
159 | IMIX-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr
160 | | [Tags] | IMIX | 2C
161 | | frame_size=IMIX_v4_1 | phy_cores=${2}
162
163 | IMIX-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr
164 | | [Tags] | IMIX | 3C
165 | | frame_size=IMIX_v4_1 | phy_cores=${3}
166
167 | IMIX-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr
168 | | [Tags] | IMIX | 4C
169 | | frame_size=IMIX_v4_1 | phy_cores=${4}