IPsec: add 2n crypto udir perf tests
[csit.git] / tests / vpp / perf / crypto / 2n1l-10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf.robot
1 # Copyright (c) 2021 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/shared/default.robot
16 | Resource | resources/libraries/robot/crypto/ipsec.robot
17 |
18 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF
19 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_20000
20 | ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI
21 | ... | RXQ_SIZE_0 | TXQ_SIZE_0
22 | ... | ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir
23 |
24 | Suite Setup | Setup suite topology interfaces | performance
25 | Suite Teardown | Tear down suite | performance
26 | Test Setup | Setup test | performance
27 | Test Teardown | Tear down test | performance | ipsec_sa
28 |
29 | Test Template | Local Template
30 |
31 | Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.*
32 |
33 | ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
34 | ... | with single links between nodes.
35 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1,
36 | ... | Eth-IPv4-IPSec on DUT1-TG
37 | ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\
38 | ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\
39 | ... | and sends back to TG.
40 | ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\
41 | ... | with zero packet loss tolerance, then measures loss at this load\
42 | ... | while additional tunnels are configured.\
43 | ... | Test packets are generated by TG on
44 | ... | links to DUTs. TG traffic profile contains one L3 flow-groups
45 | ... | (flow-group per direction, number of flows per flow-group equals to
46 | ... | number of IPSec tunnels) with all packets
47 | ... | containing Ethernet header, IPv4 header with IP protocol=61 and
48 | ... | static payload. MAC addresses are matching MAC addresses of the TG
49 | ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
50 | ... | is applied to the stream.
51 | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
52
53 *** Variables ***
54 | @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so
55 | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
56 | ${crypto_type}= | ${None}
57 | ${nic_name}= | Intel-X710
58 | ${nic_driver}= | vfio-pci
59 | ${nic_rxq_size}= | 0
60 | ${nic_txq_size}= | 0
61 | ${nic_pfs}= | 2
62 | ${nic_vfs}= | 0
63 | ${osi_layer}= | L3
64 | ${overhead}= | ${78}
65 | ${tg_if1_ip4}= | 192.168.10.2
66 | ${dut1_if1_ip4}= | 192.168.10.1
67 | ${tun_if1_ip4}= | 100.0.0.1
68 | ${tun_if2_ip4}= | 200.0.0.2
69 | ${raddr_ip4}= | 20.0.0.0
70 | ${laddr_ip4}= | 10.0.0.0
71 | ${addr_range}= | ${24}
72 | ${n_tunnels}= | ${20000}
73 | ${n_added_tunnels}= | ${1}
74 # Traffic profile:
75 | ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir
76 | ${traffic_directions}= | ${1}
77
78 *** Keywords ***
79 | Local Template
80 | | [Documentation]
81 | | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\
82 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
83 | | ... | [Ver] Measure packet loss during reconfig at NDR load.\
84 | |
85 | | ... | *Arguments:*
86 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
87 | | ... | Type: integer, string
88 | | ... | - phy_cores - Number of physical cores. Type: integer
89 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
90 | |
91 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
92 | |
93 | | Set Test Variable | \${frame_size}
94 | |
95 | | # These are enums (not strings) so they cannot be in Variables table.
96 | | ${encr_alg}= | Crypto Alg AES CBC 128
97 | | ${auth_alg}= | Integ Alg SHA 512 256
98 | |
99 | | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels}
100 | | Given Set Max Rate And Jumbo
101 | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
102 | | And Pre-initialize layer driver | ${nic_driver}
103 | | And Apply startup configuration on all VPP DUTs
104 | | When Initialize layer driver | ${nic_driver}
105 | | And Initialize layer interface
106 | | And Initialize IPSec in 2-node circular topology
107 | | And VPP IPsec Create Tunnel Interfaces
108 | | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0]
109 | | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
110 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
111 | | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
112 | | Start Traffic on Background | ${unidirectional_throughput}
113 | | And VPP IPsec Create Tunnel Interfaces
114 | | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0]
115 | | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg}
116 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels}
117 | | ${result}= | Stop Running Traffic
118 | | Display Reconfig Test Message | ${result}
119
120 *** Test Cases ***
121 | 64B-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf
122 | | [Tags] | 64B | 1C
123 | | frame_size=${64} | phy_cores=${1}
124
125 | 64B-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf
126 | | [Tags] | 64B | 2C
127 | | frame_size=${64} | phy_cores=${2}
128
129 | 64B-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf
130 | | [Tags] | 64B | 4C
131 | | frame_size=${64} | phy_cores=${4}
132
133 | 1518B-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf
134 | | [Tags] | 1518B | 1C
135 | | frame_size=${1518} | phy_cores=${1}
136
137 | 1518B-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf
138 | | [Tags] | 1518B | 2C
139 | | frame_size=${1518} | phy_cores=${2}
140
141 | 1518B-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf
142 | | [Tags] | 1518B | 4C
143 | | frame_size=${1518} | phy_cores=${4}
144
145 | 9000B-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf
146 | | [Tags] | 9000B | 1C
147 | | frame_size=${9000} | phy_cores=${1}
148
149 | 9000B-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf
150 | | [Tags] | 9000B | 2C
151 | | frame_size=${9000} | phy_cores=${2}
152
153 | 9000B-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf
154 | | [Tags] | 9000B | 4C
155 | | frame_size=${9000} | phy_cores=${4}
156
157 | IMIX-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf
158 | | [Tags] | IMIX | 1C
159 | | frame_size=IMIX_v4_1 | phy_cores=${1}
160
161 | IMIX-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf
162 | | [Tags] | IMIX | 2C
163 | | frame_size=IMIX_v4_1 | phy_cores=${2}
164
165 | IMIX-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf
166 | | [Tags] | IMIX | 4C
167 | | frame_size=IMIX_v4_1 | phy_cores=${4}