IPsec: add 4, 40 and 400 tunnel policy tests
[csit.git] / tests / vpp / perf / crypto / 2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-policy-aes128gcm-udir-ndrpdr.robot
1 # Copyright (c) 2021 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/shared/default.robot
16 | Resource | resources/libraries/robot/crypto/ipsec.robot
17 |
18 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR
19 | ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X710 | SCALE | TNL_40
20 | ... | AES_128_GCM | AES | DRV_VFIO_PCI
21 | ... | RXQ_SIZE_0 | TXQ_SIZE_0
22 | ... | ethip4ipsec40tnlsw-ip4base-policy-aes128gcm-udir
23 |
24 | Suite Setup | Setup suite topology interfaces | performance
25 | Suite Teardown | Tear down suite | performance
26 | Test Setup | Setup test | performance
27 | Test Teardown | Tear down test | performance | ipsec_sa
28 |
29 | Test Template | Local Template
30 |
31 | Documentation | *IPv4 IPsec tunnel mode performance test suite.*
32 |
33 | ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
34 | ... | with single links between nodes.
35 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1,
36 | ... | Eth-IPv4-IPSec on DUT1-TG
37 | ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\
38 | ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\
39 | ... | and sends back to TG.
40 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
41 | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
42 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
43 | ... | of packets transmitted. NDR and PDR are discovered for different\
44 | ... | Ethernet L2 frame sizes using MLRsearch library.\
45 | ... | Test packets are generated by TG on links to DUTs.
46 | ... | TG traffic profile contains one L3 flow-groups (number of flows
47 | ... | per flow-group equals to number of IPSec tunnels) with all packets
48 | ... | containing Ethernet header, IPv4 header with IP protocol=61 and
49 | ... | static payload. MAC addresses are matching MAC addresses of the TG
50 | ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
51 | ... | is applied to the stream.
52 | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
53
54 *** Variables ***
55 | @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so
56 | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
57 | ${crypto_type}= | ${None}
58 | ${nic_name}= | Intel-X710
59 | ${nic_driver}= | vfio-pci
60 | ${nic_rxq_size}= | 0
61 | ${nic_txq_size}= | 0
62 | ${nic_pfs}= | 2
63 | ${nic_vfs}= | 0
64 | ${osi_layer}= | L3
65 | ${overhead}= | ${54}
66 | ${tg_if1_ip4}= | 192.168.10.2
67 | ${dut1_if1_ip4}= | 192.168.10.1
68 | ${tun_if1_ip4}= | 100.0.0.1
69 | ${tun_if2_ip4}= | 100.0.0.2
70 | ${raddr_ip4}= | 20.0.0.0
71 | ${laddr_ip4}= | 10.0.0.0
72 | ${addr_range}= | ${24}
73 | ${n_tunnels}= | ${40}
74 # Traffic profile:
75 | ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir
76 | ${traffic_directions}= | ${1}
77
78 *** Keywords ***
79 | Local Template
80 | | [Documentation]
81 | | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\
82 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
83 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
84 | |
85 | | ... | *Arguments:*
86 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
87 | | ... | Type: integer, string
88 | | ... | - phy_cores - Number of physical cores. Type: integer
89 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
90 | |
91 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
92 | |
93 | | Set Test Variable | \${frame_size}
94 | |
95 | | # These are enums (not strings) so they cannot be in Variables table.
96 | | ${encr_alg} = | Crypto Alg AES GCM 128
97 | | ${auth_alg} = | Set Variable | ${NONE}
98 | | ${ipsec_proto} = | IPsec Proto ESP
99 | |
100 | | Given Set Max Rate And Jumbo
101 | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
102 | | And Pre-initialize layer driver | ${nic_driver}
103 | | And Apply Startup configuration on all VPP DUTs
104 | | When Initialize layer driver | ${nic_driver}
105 | | And Initialize layer interface
106 | | And Initialize IPSec in 2-node circular topology
107 | | And VPP IPsec Add Multiple Tunnels
108 | | ... | ${nodes} | ${DUT1_${int}2}[0] | ${TG_pf2}[0] | ${n_tunnels}
109 | | ... | ${encr_alg} | ${auth_alg} | ${tun_if1_ip4} | ${tun_if2_ip4}
110 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
111 | | Then Find NDR and PDR intervals using optimized search
112
113 *** Test Cases ***
114 | 64B-1c-ethip4ipsec40tnlsw-ip4base-policy-aes128gcm-udir-ndrpdr
115 | | [Tags] | 64B | 1C
116 | | frame_size=${64} | phy_cores=${1}
117
118 | 64B-2c-ethip4ipsec40tnlsw-ip4base-policy-aes128gcm-udir-ndrpdr
119 | | [Tags] | 64B | 2C
120 | | frame_size=${64} | phy_cores=${2}
121
122 | 64B-4c-ethip4ipsec40tnlsw-ip4base-policy-aes128gcm-udir-ndrpdr
123 | | [Tags] | 64B | 4C
124 | | frame_size=${64} | phy_cores=${4}
125
126 | 1518B-1c-ethip4ipsec40tnlsw-ip4base-policy-aes128gcm-udir-ndrpdr
127 | | [Tags] | 1518B | 1C
128 | | frame_size=${1518} | phy_cores=${1}
129
130 | 1518B-2c-ethip4ipsec40tnlsw-ip4base-policy-aes128gcm-udir-ndrpdr
131 | | [Tags] | 1518B | 2C
132 | | frame_size=${1518} | phy_cores=${2}
133
134 | 1518B-4c-ethip4ipsec40tnlsw-ip4base-policy-aes128gcm-udir-ndrpdr
135 | | [Tags] | 1518B | 4C
136 | | frame_size=${1518} | phy_cores=${4}
137
138 | 9000B-1c-ethip4ipsec40tnlsw-ip4base-policy-aes128gcm-udir-ndrpdr
139 | | [Tags] | 9000B | 1C
140 | | frame_size=${9000} | phy_cores=${1}
141
142 | 9000B-2c-ethip4ipsec40tnlsw-ip4base-policy-aes128gcm-udir-ndrpdr
143 | | [Tags] | 9000B | 2C
144 | | frame_size=${9000} | phy_cores=${2}
145
146 | 9000B-4c-ethip4ipsec40tnlsw-ip4base-policy-aes128gcm-udir-ndrpdr
147 | | [Tags] | 9000B | 4C
148 | | frame_size=${9000} | phy_cores=${4}
149
150 | IMIX-1c-ethip4ipsec40tnlsw-ip4base-policy-aes128gcm-udir-ndrpdr
151 | | [Tags] | IMIX | 1C
152 | | frame_size=IMIX_v4_1 | phy_cores=${1}
153
154 | IMIX-2c-ethip4ipsec40tnlsw-ip4base-policy-aes128gcm-udir-ndrpdr
155 | | [Tags] | IMIX | 2C
156 | | frame_size=IMIX_v4_1 | phy_cores=${2}
157
158 | IMIX-4c-ethip4ipsec40tnlsw-ip4base-policy-aes128gcm-udir-ndrpdr
159 | | [Tags] | IMIX | 4C
160 | | frame_size=IMIX_v4_1 | phy_cores=${4}