28bdd66fd86a4751c6ed7d1a1e8d7e1b0967a8e4
[csit.git] / tests / vpp / perf / ip4 / 10ge2p1x520-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr.robot
1 # Copyright (c) 2018 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/performance/performance_setup.robot
16 | ...
17 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
18 | ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL
19 | ... | IACL | ACL10 | 100_FLOWS
20 | ...
21 | Suite Setup | Run Keywords
22 | ... | Set up 3-node performance topology with DUT's NIC model | L3
23 | ... | Intel-X520-DA2
24 | ... | AND | Set up performance test suite with ACL
25 | Suite Teardown | Tear down 3-node performance topology
26 | ...
27 | Test Setup | Set up performance test
28 | ...
29 | Test Teardown | Tear down performance test with ACL
30 | ... | ${min_rate}pps | ${framesize} | ${traffic_profile}
31 | ...
32 | Test Template | Local Template
33 | ...
34 | Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
35 | ...
36 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
37 | ... | with single links between nodes.
38 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
39 | ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
40 | ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
41 | ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
42 | ... | DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.\
43 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
44 | ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\
45 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
46 | ... | of packets transmitted. NDR and PDR are discovered for different\
47 | ... | Ethernet L2 frame sizes using MLRsearch library.
48 | ... | Test packets are generated by TG on\
49 | ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
50 | ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
51 | ... | all packets containing Ethernet header, IPv4 header with UDP header and\
52 | ... | static payload. MAC addresses are matching MAC addresses of the TG node\
53 | ... | interfaces.
54 | ... | *[Ref] Applicable standard specifications:* RFC2544.
55
56 *** Variables ***
57 # X520-DA2 bandwidth limit
58 | ${s_limit}= | ${10000000000}
59
60 # ACL test setup
61 | ${acl_action}= | permit+reflect
62 | ${acl_apply_type}= | input
63 | ${no_hit_aces_number}= | 10
64 | ${flows_per_dir}= | 100
65
66 # starting points for non-hitting ACLs
67 | ${src_ip_start}= | 30.30.30.1
68 | ${dst_ip_start}= | 40.40.40.1
69 | ${ip_step}= | ${1}
70 | ${sport_start}= | ${1000}
71 | ${dport_start}= | ${1000}
72 | ${port_step}= | ${1}
73 | ${trex_stream1_subnet}= | 10.10.10.0/24
74 | ${trex_stream2_subnet}= | 20.20.20.0/24
75
76 | ${traffic_profile}= | trex-sl-3n-ethip4udp-10u10p-conc
77
78 *** Keywords ***
79 | Local Template
80 | | [Documentation] | FIXME.
81 | | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
82 | | ...
83 | | Set Test Variable | ${framesize}
84 | | Set Test Variable | ${min_rate} | ${10000}
85 | | ...
86 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
87 | | And Add PCI devices to all DUTs
88 | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
89 | | ... | ${s_limit} | ${framesize}
90 | | And Apply startup configuration on all VPP DUTs
91 | | ${ip_nr}= | Set Variable | 10
92 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in 3-node circular topology
93 | | Then Find NDR and PDR intervals using optimized search
94 | | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate}
95
96 *** Test Cases ***
97 | tc01-64B-1c-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr
98 | | [Tags] | 64B | 1C
99 | | framesize=${64} | phy_cores=${1}
100
101 | tc02-64B-2c-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr
102 | | [Tags] | 64B | 2C
103 | | framesize=${64} | phy_cores=${2}
104
105 | tc03-64B-4c-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr
106 | | [Tags] | 64B | 4C
107 | | framesize=${64} | phy_cores=${4}
108
109 | tc04-1518B-1c-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr
110 | | [Tags] | 1518B | 1C
111 | | framesize=${1518} | phy_cores=${1}
112
113 | tc05-1518B-2c-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr
114 | | [Tags] | 1518B | 2C
115 | | framesize=${1518} | phy_cores=${2}
116
117 | tc06-1518B-4c-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr
118 | | [Tags] | 1518B | 4C
119 | | framesize=${1518} | phy_cores=${4}
120
121 | tc07-9000B-1c-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr
122 | | [Tags] | 9000B | 1C
123 | | framesize=${9000} | phy_cores=${1}
124
125 | tc08-9000B-2c-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr
126 | | [Tags] | 9000B | 2C
127 | | framesize=${9000} | phy_cores=${2}
128
129 | tc09-9000B-4c-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr
130 | | [Tags] | 9000B | 4C
131 | | framesize=${9000} | phy_cores=${4}
132
133 | tc10-IMIX-1c-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr
134 | | [Tags] | IMIX | 1C
135 | | framesize=IMIX_v4_1 | phy_cores=${1}
136
137 | tc11-IMIX-2c-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr
138 | | [Tags] | IMIX | 2C
139 | | framesize=IMIX_v4_1 | phy_cores=${2}
140
141 | tc12-IMIX-4c-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr
142 | | [Tags] | IMIX | 4C
143 | | framesize=IMIX_v4_1 | phy_cores=${4}